component
TPS27082LDDCR
Public Made by Adomby adom
Texas Instruments Power Distribution Switches, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS27082LDDCR
Texas Instruments · Power Distribution Switches · SOT-23-6
TPS27082LDDCR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Connect to system ground; provides reference for all voltage measurements. |
| 2 | VOUT | output | Drain terminal of power PFET Q1; output voltage supplied to load; may connect optional slew rate control capacitor between this pin and R1/C1. |
| 3 | VOUT | output | Drain terminal of power PFET Q1; output voltage node electrically connected with pin 2. |
| 4 | VIN | power_in | Source terminal of power PFET Q1; input supply voltage range 1.2 V to 8 V; connect external pull-up resistor between VIN and R1/C1 pins. |
| 5 | ON/OFF | input | Active high enable control input; apply voltage > 1.0 V to enable output switch; NMOS logic interface with hysteresis 600 mV to 730 mV depending on R1 value; connect pull-down resistor to GND if driven with high impedance source. |
| 6 | R1/C1 | input | Gate configuration node of power PFET Q1; connect external pull-up resistor R1 between VIN and this pin to set ON-resistance; optionally connect slew rate control capacitor C1 from VOUT to this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
TPS27082LDDCR - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
tps27082lddcr-etched.step/tps27082lddcr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps27082lddcr.step/tps27082lddcr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (25 pp, sha256
e3af703e0a01286f, retrieved 2026-10-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).