# TPS26633RGER

**Texas Instruments** · Supervisor And Reset ICs · VQFN-24-EP(4x4)

TPS26633RGER from Texas Instruments, in a VQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Power input that connects to the DRAIN of the internal FET. |
| 2 | IN | power_in | Power input that connects to the DRAIN of the internal FET. |
| 3 | B_GATE | output | Blocking FET gate driver output; connect to the GATE of the external N-FET, and leave floating if the external FET is not used. |
| 4 | DRV | output | Blocking FET fast pulldown switch drive; connect to the GATE of the external pulldown switch, and leave floating if the external N-FET is not used. |
| 5 | IN_SYS | power_in | Power input and supply voltage of the device; connect to the source of the blocking FET when used, or short to IN if no blocking FET is used. |
| 6 | UVLO | input | Input for setting the programmable undervoltage lockout threshold; an undervoltage event turns off the internal FET and asserts FLT, and connecting UVLO to GND selects the internal default threshold. |
| 7 | PLIM | input | Input for setting the programmable output power limiting threshold; connect a resistor across PLIM to GND to set the output power limit, or connect PLIM to GND if the PLIM feature is not used. |
| 8 | GND | power_in | Connect GND to system ground. |
| 9 | dVdT | bidirectional | A capacitor from this pin to GND sets the output voltage slew rate. |
| 10 | ILIM | bidirectional | A resistor from this pin to GND sets the overload and short-circuit current limit. |
| 11 | MODE | input | Mode selection pin for the overload fault response. |
| 12 | SHDN | input | Shutdown pin; pulling SHDN low puts the device into low-power shutdown mode, and cycling SHDN resets a device latched off by a fault. |
| 13 | IMON | output | Analog current monitor output that sources a scaled-down ratio of the current through the internal FET; a resistor from this pin to GND converts it to voltage, and it can be left floating if unused. |
| 14 | FLT | output | Open-drain fault event indicator; leave floating or connect to GND if unused. |
| 15 | PGTH | input | PGOOD comparator input. |
| 16 | PGOOD | output | Active-high power-good output that goes high when PGTH crosses the V(PGTHR) threshold and the internal FET is enhanced; connect to GND or leave floating if unused. |
| 17 | OUT | power_out | Power output of the device. |
| 18 | OUT | power_out | Power output of the device. |
| 19 | N.C | unconnected | No connect. |
| 20 | N.C | unconnected | No connect. |
| 21 | N.C | unconnected | No connect. |
| 22 | N.C | unconnected | No connect. |
| 23 | N.C | unconnected | No connect. |
| 24 | N.C | unconnected | No connect. |
| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-24-EP(4x4) |
| Category | Power Management (PMIC) |
| Pins | 25 |

## CAD (KiCad official)

- Symbol: `TPS26633RGER`
- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm`
- 3D model: VQFN-24-EP(4x4) (KiCad packages3D, STEP)
- 3D model files: `tps26633rger-etched.step` / `tps26633rger-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps26633rger.step` / `tps26633rger.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps2663) (60 pp, sha256 `63ce6e9453e4499b`, retrieved 2026-10-10, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/tps26633rger-datasheet.pdf)