Generated by kicad-footprint-generator · KiCad file format 20260206
TPS26614DDFR
Texas Instruments · LED Drivers · TSOT-23-8
TPS26614DDFR from Texas Instruments, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Reference ground for all internal voltages; connect to GND of the ±Vs supply. |
| 2 | MODE | input | MODE selection pin for overload response, setting the current limit to IOL, 2 × IOL, or 2 × IOL with extended IOL expiry time; the recommended MODE voltage range is 0 V to 3 V. |
| 3 | -Vs | power_in | Negative supply for dual-supply configurations, with a recommended range of -20 V to 0 V and an absolute maximum of -22 V to 0.3 V; connect to GND in a single-supply configuration. |
| 4 | IN | power_in | Signal/power input with a recommended IN voltage range of -50 V to 50 V and an absolute maximum of ±55 V. |
| 5 | OUT | power_out | Signal/power output; the device limits current to IOL of 32 mA typical in the fixed bidirectional current limit. |
| 6 | +Vs | power_in | Positive supply for powering the device, with a recommended range of 0 V to 30 V and an absolute maximum of 32 V. |
| 7 | EN | input | Enable control for the TPS26614; pull low to turn off the device, with an internal pullup so it can be left floating to enable it, and a recommended voltage range of 0 V to 5 V. |
| 8 | SGOOD | output | Signal-good indicator that goes low during normal operation and can drive an external LED, with a maximum sink current of 200 µA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSOT-23-8 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| IN, OUT, IN-OUT voltage | -55 | 55 | V | 4 | |||
| SGOOD, EN, MODE, VSNS voltage | -0.3 | 5.5 | V | 4 | |||
| +Vs supply voltage | -0.3 | 32 | V | 4 | |||
| -Vs supply voltage | -22 | 0.3 | V | 4 | |||
| ISGOOD source current | ISGOOD | 200 | µA | 4 | |||
| Operating junction temperature | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| IN, OUT voltage | -50 | 50 | V | 4 | |||
| +Vs supply voltage | +Vs | 0 | 30 | V | 4 | ||
| -Vs supply voltage | -Vs | -20 | 0 | V | 4 | ||
| EN, SGOOD, VSNS voltage | 0 | 5 | V | 4 | |||
| MODE voltage | 0 | 3 | V | 4 | |||
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 117.8 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 57.6 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 40.2 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ΨJT | 2.2 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ΨJB | 40 | °C/W | 5 | |||
| IN signal voltage | V(IN) | -50 | 50 | V | 5 | ||
| Leakage current from IN and OUT to GND in normal operation | IQ | -0.1 | 0.1 | µA | (-Vs) < VIN, VOUT < (+Vs, 0.35 V) | 5 | |
| Leakage current from IN and OUT to GND in normal operation | IQ | 1 | µA | (+Vs, 0.35 V) < VIN, VOUT < +Vs | 5 | ||
| Bipolar current limit | I(OL) | 25 | 32 | 40 | mA | V(IN)-V(OUT) = ±1 V, -Vs connected to negative supply | 5 |
| Unipolar current limit | I(OL) | 25 | 32 | 40 | mA | V(IN)-V(OUT) = +1 V, -Vs connected to GND | 5 |
| Unipolar current limit with VIN < -VS (TPS26613/14 only) | I(OL) | -40 | -32 | -25 | mA | V(IN) = -24 V, V(OUT) = -19 V, -Vs = -20 V | 5 |
| Transient pulse over current limit | I(OL_Pulse) | 50 | 60 | 72 | mA | V(IN)-V(OUT) = +1.5 V, MODE = Floating | 5 |
| Sum of leakage current from IN and OUT in Off state (Source) | IOff-Lkg-IN + IOff-Lkg-OUT | -9.75 | -5.25 | µA | -12.5 V < VIN < 12.5 V; VOUT = 0 V; EN = Low; +Vs = 15 V; -Vs = -15 V | 5 | |
| Leakage current from IN pin in Off state (Source) | IOff-Lkg-IN | -6 | -1 | µA | -12.5 V < VIN < 12.5 V; VOUT = 0 V; EN = Low; +Vs = 15 V; -Vs = -15 V | 5 | |
| Leakage current from OUT pin in Off state (Source) | IOff-Lkg-OUT | -6 | -1 | µA | -12.5 V < VOUT < 12.5 V; VIN = 0 V; EN = Low; +Vs = 15 V; -Vs = -15 V | 5 | |
| OUT overvoltage hysteresis | VOUT_OVLO_hyst | 30 | 75 | mV | 5 | ||
| OUT undervoltage hysteresis (TPS26613/14 only) | VO_UVLO_hyst | 30 | 75 | mV | 6 | ||
| +Vs supply operating voltage (TPS26610/11/13/14) | V(+Vs) | 2.25 | 30 | V | 6 | ||
| -Vs supply operating voltage | V(-Vs) | -20 | 0 | V | 6 | ||
| Difference between +Vs and -Vs | Vs_DIFF | 3 | 50 | V | 6 | ||
| Current sourced from +Vs supply to GND in normal operation | I(+Vs) | 1.07 | 1.65 | mA | SGOOD = Floating | 6 | |
| Current sourced from +Vs supply to GND in fault operation | I(+Vs) | 1.2 | 1.75 | mA | SGOOD = Floating | 6 | |
| OFF state supply current (TPS26611/12/14 only) | IVS_OFF | 0.27 | mA | EN = Low | 6 | ||
| IN to OUT total ON resistance | RON | 4.8 | 7.5 | 12.5 | Ω | -40 ℃ < T < 125 ℃, I(IN) < Overload Current | 6 |
| EN open circuit voltage (TPS26611/12/14) | V(EN) | 2.1 | 2.5 | V | I(EN) = -0.1 µA | 6 | |
| EN leakage current (Sink) | I(EN_LKG) | 10 | µA | V(EN) = 5.5 V | 6 | ||
| EN leakage current (Source) | I(EN_LKG) | -10 | µA | V(EN) = 0 V | 6 | ||
| EN rising threshold | V(ENR) | 1.72 | V | 6 | |||
| EN falling threshold | V(ENF) | 1 | V | 6 | |||
| SGOOD output level, HIGH | VOH_SGOOD | 2 | 3 | V | (+Vs) > 2.5 V, 0 mA < ISGOOD < 1 mA | 7 | |
| SGOOD pull down impedance | RSGOOD | 6.3 | kΩ | 0 µA < ISGOOD < 200 µA | 7 | ||
| MODE source current | I(MODE) | 1.55 | 2 | 2.4 | µA | 7 | |
| Mode selection resistor | RMODE | 180 | kΩ | 7 | |||
| Thermal shutdown threshold, rising | T(TSD) | 160 | °C | 7 | |||
| Thermal shutdown hysteresis | T(TSDHyst) | 11 | °C | 7 | |||
| Input small signal bandwidth | BW | 10 | kHz | -25 mA < IIN < 25 mA, ΔIIN = 1 mApp at 1 kΩ | 7 | ||
| Turn ON delay with Vs/-Vs supply | tON_dly | 120 | µs | Delay from +Vs/-Vs supply applied to FET on, EN = Floating | 7 | ||
| Turn OFF delay with +Vs/-Vs supply | tOFF_dly | 10 | µs | Delay from +Vs/-Vs supply removed to FET off, EN = Floating | 7 | ||
| Turn ON delay with EN pin | tON_EN_dly | 120 | µs | Delay from EN HIGH to FET on | 7 | ||
| Turn OFF delay with EN pin | tOFF_EN_dly | 10 | µs | Delay from EN LOW to FET off | 7 | ||
| Overload current limit response time | tOL | 30 | 55 | µs | Load transient from 20 mA to 50 mA; time to current within 20% of IOL | 7 | |
| Pulse overload current limit response time | tOL_PULSE | 20 | 50 | µs | Load transient from 20 mA to 80 mA; time to current within 20% of IOL_Pulse | 7 | |
| Fast-trip response time | tFASTRIP | 5 | µs | MODE = GND, current exceeding 120 mA to FET off | 7 | ||
| SGOOD deglitch delay during assertion | TSG_Deglitch | 685 | µs | Deglitch delay during SGOOD assertion | 7 | ||
| SGOOD deglitch delay during de-assertion | TSG_Deglitch | 1.3 | ms | Deglitch delay during SGOOD de-assertion | 7 | ||
| OUT OVLO cutoff detection time | tOUT_OV_CUT | 1 | 5 | µs | V(OUT) ↑ 100 mV above VOUT_OVLO to FET OFF | 7 |
CAD (KiCad official)
- Symbol:
TPS26614DDFR - Footprint:
Package_TO_SOT_SMD:TSOT-23-8 - 3D model: TSOT-23-8 (KiCad packages3D, STEP)
- 3D model files:
tps26614ddfr-etched.step/tps26614ddfr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps26614ddfr.step/tps26614ddfr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (45 pp, sha256
22fc9c245d7926dd, retrieved 2026-11-02, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).