TPS26611DDFR

{
  "slug": "tps26611ddfr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Power Management - Specialized, TSOT-23-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps26611ddfr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps26611ddfr.kicad_sym",
    "tps26611ddfr.kicad_mod",
    "tps26611ddfr.glb",
    "tps26611ddfr.step",
    "tps26611ddfr.lbr",
    "docs/hero.png",
    "docs/tps26611ddfr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps26611ddfr-hero.glb",
    "tps26611ddfr-hero.overlay.json",
    "tps26611ddfr-etched.glb"
  ],
  "component": {
    "mpn": "TPS26611DDFR",
    "manufacturer": "Texas Instruments",
    "package": "TSOT-23-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "Power Management - Specialized",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tps2661.pdf",
    "parts": {
      "symbol": "tps26611ddfr.kicad_sym",
      "footprint": "tps26611ddfr.kicad_mod",
      "model_3d": "tps26611ddfr-hero.glb",
      "model_3d_plain": "tps26611ddfr-etched.glb",
      "model_3d_step": "tps26611ddfr-etched.step",
      "model_3d_step_plain": "tps26611ddfr.step",
      "lbr": "tps26611ddfr.lbr"
    },
    "distributor_links": {
      "lcsc": "C3148140",
      "digikey": "296-TPS26611DDFRTR-ND",
      "mouser": "595-TPS26611DDFR"
    },
    "distributor_check": {
      "checked_at": "2026-10-31T06:29:54Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-TPS26611DDFRTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-TPS26611DDFR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Reference ground for all internal voltages; connect to GND of the ±Vs supply."
      },
      {
        "number": "2",
        "name": "MODE",
        "type": "input",
        "description": "MODE selection pin for overload response; sets current limit to IOL, 2 × IOL, or 2 × IOL with extended IOL expiry time (GND, open, or 180 kΩ to GND), absolute max −0.3 to 5.5 V."
      },
      {
        "number": "3",
        "name": "-Vs",
        "type": "power_in",
        "description": "Negative supply for dual supply configurations; connect to GND when used in a single supply configuration (recommended −20 V to 0 V)."
      },
      {
        "number": "4",
        "name": "IN",
        "type": "passive",
        "description": "Signal/power input, rated for −50 V to 50 V operating (±55 V absolute maximum)."
      },
      {
        "number": "5",
        "name": "OUT",
        "type": "passive",
        "description": "Signal/power output, rated for −50 V to 50 V operating (±55 V absolute maximum)."
      },
      {
        "number": "6",
        "name": "+Vs",
        "type": "power_in",
        "description": "Positive supply for powering the device, recommended 0 to 30 V (absolute max 32 V)."
      },
      {
        "number": "7",
        "name": "EN",
        "type": "input",
        "description": "Enable control on the TPS26611: pull EN low to turn off the device; it has an internal pullup and can be left floating to enable the device."
      },
      {
        "number": "8",
        "name": "SGOOD",
        "type": "output",
        "description": "Signal good indicator that is low when the device is within normal operating condition and high on fault conditions; can drive an external LED, sourcing current from +Vs."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin 7 is EN on TPS26611 (VSNS on TPS26610/13 only); EN chosen for this MPN. Package is called SOT-23; Pin types for IN, OUT, -Vs, +Vs are given as P (power) in the datasheet. IN/OUT are signal pass-thro"
        ],
        "pages_sent": 14,
        "cost_usd": 0.1251,
        "at": "2026-10-31T06:29:25"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tps2661.pdf",
        "pages": 45,
        "sha256": "d7602fcda1d74f81",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps26611ddfr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          0.95
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "dc644a91883054d8f75e38542e63c2050dc8f2e8b7f12e1c57dcd93245fbd473",
        "checked": "2026-10-31",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps26611ddfr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          0.95
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "8aed1f486f902a60aec1f8c23a5ad4a114191462efea6a546f0c590298071901",
        "checked": "2026-10-31",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "DDF0008A",
      "source_page": 42,
      "D": {
        "nom_mm": 2.9,
        "range_mm": [
          2.85,
          2.95
        ]
      },
      "E1": {
        "nom_mm": 1.6,
        "range_mm": [
          1.55,
          1.65
        ]
      },
      "E": {
        "nom_mm": 2.65,
        "range_mm": [
          null,
          2.95
        ]
      },
      "e": {
        "nom_mm": 0.65,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.1,
        "range_mm": [
          null,
          1.1
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "tps26611ddfr.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}