TPS26610DDFR

{
  "slug": "tps26610ddfr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments LED Drivers, TSOT-23-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "display modules - led drivers - display drivers",
    "tps26610ddfr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps26610ddfr.kicad_sym",
    "tps26610ddfr.kicad_mod",
    "tps26610ddfr.glb",
    "tps26610ddfr.step",
    "tps26610ddfr.lbr",
    "docs/hero.png",
    "docs/tps26610ddfr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps26610ddfr-hero.glb",
    "tps26610ddfr-hero.overlay.json",
    "tps26610ddfr-etched.glb"
  ],
  "component": {
    "mpn": "TPS26610DDFR",
    "manufacturer": "Texas Instruments",
    "package": "TSOT-23-8",
    "pin_count": 8,
    "category": "Display Modules / LED Drivers / Display Drivers",
    "subcategory": "LED Drivers",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tps2661.pdf",
    "parts": {
      "symbol": "tps26610ddfr.kicad_sym",
      "footprint": "tps26610ddfr.kicad_mod",
      "model_3d": "tps26610ddfr-hero.glb",
      "model_3d_plain": "tps26610ddfr-etched.glb",
      "model_3d_step": "tps26610ddfr-etched.step",
      "model_3d_step_plain": "tps26610ddfr.step",
      "lbr": "tps26610ddfr.lbr"
    },
    "distributor_links": {
      "lcsc": "C3194314",
      "digikey": "296-TPS26610DDFRTR-ND"
    },
    "distributor_check": {
      "checked_at": "2026-10-22T22:33:12Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-TPS26610DDFRTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Reference ground for all internal voltages; connect to GND of the ±Vs supply."
      },
      {
        "number": "2",
        "name": "MODE",
        "type": "input",
        "description": "MODE selection pin for overload response; sets current limit to IOL, 2 × IOL, or 2 × IOL with extended IOL expiry time (0 to 3 V recommended)."
      },
      {
        "number": "3",
        "name": "-Vs",
        "type": "power_in",
        "description": "Negative supply for dual supply configurations (0 to -20 V recommended); connect to GND in a single supply configuration."
      },
      {
        "number": "4",
        "name": "IN",
        "type": "passive",
        "description": "Signal/power input, rated -50 V to 50 V recommended (±55 V absolute maximum)."
      },
      {
        "number": "5",
        "name": "OUT",
        "type": "passive",
        "description": "Signal/power output, rated -50 V to 50 V recommended (±55 V absolute maximum)."
      },
      {
        "number": "6",
        "name": "+Vs",
        "type": "power_in",
        "description": "Positive supply for powering the device (0 to 30 V recommended, 32 V absolute maximum)."
      },
      {
        "number": "7",
        "name": "VSNS",
        "type": "input",
        "description": "Supply sensing input for transition to loop power mode on the TPS26610 and TPS26613; can be left open or floating if not used (0 to 5 V)."
      },
      {
        "number": "8",
        "name": "SGOOD",
        "type": "output",
        "description": "Signal good indicator that is low during normal operating condition and goes high outside it; can drive an external LED (0 to 5 V)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: TPS26610 uses VSNS on pin 7 (no EN pin); pin 7 is EN on TPS26611/12/14. The datasheet gives the pin "
        ],
        "pages_sent": 14,
        "cost_usd": 0.1251,
        "at": "2026-10-22T22:32:57"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tps2661.pdf",
        "pages": 45,
        "sha256": "d7602fcda1d74f81",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps26610ddfr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          0.95
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "dc644a91883054d8f75e38542e63c2050dc8f2e8b7f12e1c57dcd93245fbd473",
        "checked": "2026-10-22",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps26610ddfr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          0.95
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "71df87477d5e1e18da7a33afd70fc0b400367913f700f9c834d12e9af9afb528",
        "checked": "2026-10-22",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}