TPS26601RHFT

{
  "slug": "tps26601rhft",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Global Sourcing Parts, VQFN-24-EP(4x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "global sourcing parts",
    "tps26601rhft",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps26601rhft.kicad_sym",
    "tps26601rhft.kicad_mod",
    "tps26601rhft.glb",
    "tps26601rhft.step",
    "tps26601rhft.lbr",
    "docs/hero.png",
    "docs/tps26601rhft-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps26601rhft-hero.glb",
    "tps26601rhft-hero.overlay.json"
  ],
  "component": {
    "mpn": "TPS26601RHFT",
    "manufacturer": "Texas Instruments",
    "package": "VQFN-24-EP(4x5)",
    "pin_count": 25,
    "category": "Global Sourcing Parts",
    "subcategory": "Global Sourcing Parts",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps2660",
    "parts": {
      "symbol": "tps26601rhft.kicad_sym",
      "footprint": "tps26601rhft.kicad_mod",
      "model_3d": "tps26601rhft-hero.glb",
      "model_3d_plain": "tps26601rhft.glb",
      "model_3d_step": "tps26601rhft-etched.step",
      "model_3d_step_plain": "tps26601rhft.step",
      "lbr": "tps26601rhft.lbr"
    },
    "distributor_links": {
      "lcsc": "C202198",
      "digikey": "296-45479-2-ND",
      "mouser": "595-TPS26601RHFT"
    },
    "distributor_check": {
      "checked_at": "2026-10-10T17:59:34Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-45479-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-TPS26601RHFT",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "N.C",
        "type": "unconnected",
        "description": "No connect pin, listed as N.C in the pin table."
      },
      {
        "number": "2",
        "name": "N.C",
        "type": "unconnected",
        "description": "No connect pin, listed as N.C in the pin table."
      },
      {
        "number": "3",
        "name": "N.C",
        "type": "unconnected",
        "description": "No connect pin, listed as N.C in the pin table."
      },
      {
        "number": "4",
        "name": "N.C",
        "type": "unconnected",
        "description": "No connect pin, listed as N.C in the pin table."
      },
      {
        "number": "5",
        "name": "N.C",
        "type": "unconnected",
        "description": "No connect pin, listed as N.C in the pin table."
      },
      {
        "number": "6",
        "name": "N.C",
        "type": "unconnected",
        "description": "No connect pin, listed as N.C in the pin table."
      },
      {
        "number": "7",
        "name": "N.C",
        "type": "unconnected",
        "description": "No connect pin, listed as N.C in the pin table."
      },
      {
        "number": "8",
        "name": "IN",
        "type": "power_in",
        "description": "Power input and supply voltage of the device; recommended input operating range is 4.2 V to 60 V (Recommended Operating Conditions)."
      },
      {
        "number": "9",
        "name": "IN",
        "type": "power_in",
        "description": "Power input and supply voltage of the device; recommended input operating range is 4.2 V to 60 V (Recommended Operating Conditions)."
      },
      {
        "number": "10",
        "name": "UVLO",
        "type": "input",
        "description": "Input for setting the programmable undervoltage lockout threshold; an undervoltage event turns off the internal FET and asserts FLT, and connecting UVLO to RTN selects the internal default threshold."
      },
      {
        "number": "11",
        "name": "N.C",
        "type": "unconnected",
        "description": "No connect pin, listed as N.C in the pin table."
      },
      {
        "number": "12",
        "name": "OVP",
        "type": "input",
        "description": "Input for setting the programmable overvoltage protection threshold (TPS26600/1 only); an overvoltage event turns off the internal FET and asserts FLT, and connecting OVP to RTN selects the internal default threshold."
      },
      {
        "number": "13",
        "name": "MODE",
        "type": "input",
        "description": "Mode selection pin for overload fault response, configured per the Device Functional Modes section."
      },
      {
        "number": "14",
        "name": "SHDN",
        "type": "input",
        "description": "Shutdown pin; pulling SHDN low puts the device into low power shutdown mode, and cycling SHDN resets a device that has latched off due to a fault."
      },
      {
        "number": "15",
        "name": "RTN",
        "type": "power_in",
        "description": "Reference for the device internal control circuits; external support components such as R(ILIM), C(dVdT), R(IMON) and the UVLO and OVP resistors are referenced to this pin."
      },
      {
        "number": "16",
        "name": "N.C",
        "type": "unconnected",
        "description": "No connect pin, listed as N.C in the pin table."
      },
      {
        "number": "17",
        "name": "GND",
        "type": "power_in",
        "description": "Connect GND to system ground."
      },
      {
        "number": "18",
        "name": "IMON",
        "type": "output",
        "description": "Analog current monitor output that sources a scaled-down ratio of the current through the internal FET; a resistor from this pin to RTN converts it to a proportional voltage, and it can be left floating if unused."
      },
      {
        "number": "19",
        "name": "ILIM",
        "type": "bidirectional",
        "description": "A resistor from this pin to RTN sets the overload and short-circuit current limit."
      },
      {
        "number": "20",
        "name": "dVdT",
        "type": "bidirectional",
        "description": "A capacitor from this pin to RTN sets the output voltage slew rate at start-up."
      },
      {
        "number": "21",
        "name": "N.C",
        "type": "unconnected",
        "description": "No connect pin, listed as N.C in the pin table."
      },
      {
        "number": "22",
        "name": "FLT",
        "type": "output",
        "description": "Fault event indicator; it is an open-drain output and can be left floating if unused."
      },
      {
        "number": "23",
        "name": "OUT",
        "type": "power_out",
        "description": "Power output of the device, to be connected to the load."
      },
      {
        "number": "24",
        "name": "OUT",
        "type": "power_out",
        "description": "Power output of the device, to be connected to the load."
      },
      {
        "number": "25",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The PowerPad (exposed thermal pad) is not a numbered pin on the package, so it is omitted from the p; The Pin Functions table gives N.C as VQFN pins 1-7, plus 11, 16 and 21. Each is listed individually ; The datasheet does not assign an ERC class to RTN. It is typed power_in here as the device ground re",
          "exposed pad 25 added from the footprint"
        ],
        "pages_sent": 18,
        "cost_usd": 0.1075,
        "at": "2026-10-10T17:59:20"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps2660",
        "pages": 55,
        "sha256": "fc13f366ed16ead3",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 25,
        "described": 25,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps26601rhft.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          5.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "dd34955bd2f41c7d5d4f45257df2b8077e42f694598de69e58ad55ad191eecae",
        "checked": "2026-10-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps26601rhft-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          5.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "6ccdd3d72eb171dfa06c7f04a167cea7ca461c772ddd03054c5a5255b56e84a2",
        "checked": "2026-10-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}