component
TPS259827ONRGET
Public Made by Adomby adom
Texas Instruments Surge Protection Devices (SPDs), VQFN-24(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327
{
"schema_version": 1,
"type": "component",
"slug": "tps259827onrget",
"title": "TPS259827ONRGET",
"brief": "Texas Instruments Surge Protection Devices (SPDs), VQFN-24(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"circuit protection",
"tps259827onrget",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "TPS259827ONRGET",
"manufacturer": "Texas Instruments",
"package": "VQFN-24(4x4)",
"pin_count": 25,
"category": "Circuit Protection",
"subcategory": "Surge Protection Devices (SPDs)",
"datasheet": "https://www.ti.com/cn/lit/ds/symlink/tps25982.pdf",
"parts": {
"symbol": "tps259827onrget.kicad_sym",
"footprint": "tps259827onrget.kicad_mod",
"model_3d": "tps259827onrget-hero.glb",
"model_3d_plain": "tps259827onrget.glb",
"model_3d_step": "tps259827onrget-etched.step",
"model_3d_step_plain": "tps259827onrget.step",
"lbr": "tps259827onrget.lbr"
},
"distributor_links": {
"lcsc": "C2155765",
"digikey": "296-53582-2-ND",
"mouser": "595-TPS259827ONRGET"
},
"distributor_check": {
"checked_at": "2026-10-07T03:03:25Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-53582-2-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "595-TPS259827ONRGET",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "IN",
"type": "power_in",
"description": "Power supply input voltage range 2.7V to 24V; exposed thermal pad must be evenly soldered to input power plane for proper heat dissipation and optimal current distribution."
},
{
"number": "2",
"name": "IN",
"type": "power_in",
"description": "Power supply input voltage range 2.7V to 24V; exposed thermal pad must be evenly soldered to input power plane for proper heat dissipation and optimal current distribution."
},
{
"number": "3",
"name": "IN",
"type": "power_in",
"description": "Power supply input voltage range 2.7V to 24V; exposed thermal pad must be evenly soldered to input power plane for proper heat dissipation and optimal current distribution."
},
{
"number": "4",
"name": "GND",
"type": "power_in",
"description": "Ground connection to system ground plane."
},
{
"number": "5",
"name": "GND",
"type": "power_in",
"description": "Ground connection to system ground plane."
},
{
"number": "6",
"name": "EN/UVLO",
"type": "input",
"description": "High-level active enable pin; resistor voltage divider from input power to GND adjusts UVLO threshold per VINUVLO = VUVLO(R) × (RVL1 + RVL2) / RVL2, do not leave floating."
},
{
"number": "7",
"name": "ITIMER",
"type": "output",
"description": "Capacitor to GND sets overcurrent blanking interval during which output current may temporarily exceed ILIM but remain below 2.1×ILIM threshold before circuit breaker activation; leave open for fastest response."
},
{
"number": "8",
"name": "ILIM",
"type": "output",
"description": "External resistor to GND sets output current limit threshold ILIM and fast-trip threshold per RILIM = 1460/(ILIM - 0.11) with range 82Ω to 1650Ω; do not leave floating."
},
{
"number": "9",
"name": "IMON",
"type": "output",
"description": "Analog load current monitor providing output current proportional to load current with gain 246 µA/A typical at ±1.5% accuracy; resistor to GND converts to voltage signal for ADC."
},
{
"number": "10",
"name": "RETRY_DLY",
"type": "output",
"description": "Capacitor to GND sets delay time from fault shutdown to automatic restart per tRETRY_DLY = 128 × CRETRY_DLY / IRETRY_DLY; connect to GND for latch mode without auto-retry."
},
{
"number": "11",
"name": "NRETRY",
"type": "output",
"description": "Capacitor to GND sets number of automatic restart attempts after fault with discrete levels at 4, 16, 64, 256, 1024 retries; connect to GND for infinite retry attempts."
},
{
"number": "12",
"name": "LDSTRT",
"type": "input",
"description": "Load detection/handshake signal; capacitor to GND sets time window requiring load to pull pin low after PG valid per tLDSTRT = CLDSTRT × VLDSTRT / ILDSTRT; connect to GND if feature not used, do not leave floating."
},
{
"number": "13",
"name": "PG",
"type": "tri_state",
"description": "High-level active power good indicator, open-drain output requiring external pull-up resistor to external power; valid when FET fully enhanced and output reaches full voltage, stays low when VIN < VUVP."
},
{
"number": "14",
"name": "GND",
"type": "power_in",
"description": "Ground connection to system ground plane."
},
{
"number": "15",
"name": "dVdt",
"type": "output",
"description": "Capacitor to GND sets output turn-on slew rate limiting inrush current per CdVdt = 4600/SR with bias voltage internal; leave floating for fastest slew rate and minimum startup time."
},
{
"number": "16",
"name": "IN",
"type": "power_in",
"description": "Power supply input voltage range 2.7V to 24V; part of multi-pin input connection."
},
{
"number": "17",
"name": "OUT",
"type": "power_out",
"description": "Power supply output, maximum continuous current 15A; integrated MOSFET switch with 2.7mΩ typical on-resistance at 25°C."
},
{
"number": "18",
"name": "OUT",
"type": "power_out",
"description": "Power supply output, maximum continuous current 15A; integrated MOSFET switch with 2.7mΩ typical on-resistance at 25°C."
},
{
"number": "19",
"name": "OUT",
"type": "power_out",
"description": "Power supply output, maximum continuous current 15A; integrated MOSFET switch with 2.7mΩ typical on-resistance at 25°C."
},
{
"number": "20",
"name": "OUT",
"type": "power_out",
"description": "Power supply output, maximum continuous current 15A; integrated MOSFET switch with 2.7mΩ typical on-resistance at 25°C."
},
{
"number": "21",
"name": "OUT",
"type": "power_out",
"description": "Power supply output, maximum continuous current 15A; integrated MOSFET switch with 2.7mΩ typical on-resistance at 25°C."
},
{
"number": "22",
"name": "OUT",
"type": "power_out",
"description": "Power supply output, maximum continuous current 15A; integrated MOSFET switch with 2.7mΩ typical on-resistance at 25°C."
},
{
"number": "23",
"name": "OUT",
"type": "power_out",
"description": "Power supply output, maximum continuous current 15A; integrated MOSFET switch with 2.7mΩ typical on-resistance at 25°C."
},
{
"number": "24",
"name": "OUT",
"type": "power_out",
"description": "Power supply output, maximum continuous current 15A; integrated MOSFET switch with 2.7mΩ typical on-resistance at 25°C."
},
{
"number": "25",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"exposed pad 25 added from the footprint",
"dropped thermal pad ['THERMALPAD1', 'THERMALPAD2'] absent from footprint"
],
"pages_sent": 42,
"cost_usd": 0.3234,
"at": "2026-10-07T03:03:09"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/ds/symlink/tps25982.pdf",
"pages": 55,
"sha256": "f4a0f06cfbd81f26",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 25,
"described": 25,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "tps259827onrget.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4,
4,
0.77
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "096fc110543e6d324c5120c2d38e3dca87a389da9b6fac234f1fe40856295ef4",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "tps259827onrget-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4,
4,
0.77
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "ce5b5079518766b68314ca545c4ca3a29f2580c62a3594d351c84cd939704595",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "Texas Instruments",
"Package": "VQFN-24(4x4)",
"Category": "Circuit Protection",
"Pins": "25"
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"tps259827onrget"
],
"discovery_pitch": "TPS259827ONRGET (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"author": {
"name": "Ray",
"email": "[email protected]"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"tps259827onrget.kicad_sym",
"tps259827onrget.kicad_mod",
"tps259827onrget.glb",
"tps259827onrget.step",
"tps259827onrget.lbr",
"docs/hero.png",
"docs/tps259827onrget-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"tps259827onrget-hero.glb",
"tps259827onrget-hero.overlay.json"
],
"visibility": {
"public": true
}
}