TPS259823ONRGER

{
  "slug": "tps259823onrger",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Surge Protection Devices (SPDs), QFN-24(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "circuit protection",
    "tps259823onrger",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps259823onrger.kicad_sym",
    "tps259823onrger.kicad_mod",
    "tps259823onrger.glb",
    "tps259823onrger.step",
    "tps259823onrger.lbr",
    "docs/hero.png",
    "docs/tps259823onrger-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps259823onrger-hero.glb",
    "tps259823onrger-hero.overlay.json"
  ],
  "component": {
    "mpn": "TPS259823ONRGER",
    "manufacturer": "Texas Instruments",
    "package": "QFN-24(4x4)",
    "pin_count": 25,
    "category": "Circuit Protection",
    "subcategory": "Surge Protection Devices (SPDs)",
    "datasheet": "https://www.ti.com/cn/lit/ds/symlink/tps25982.pdf",
    "parts": {
      "symbol": "tps259823onrger.kicad_sym",
      "footprint": "tps259823onrger.kicad_mod",
      "model_3d": "tps259823onrger-hero.glb",
      "model_3d_plain": "tps259823onrger.glb",
      "model_3d_step": "tps259823onrger-etched.step",
      "model_3d_step_plain": "tps259823onrger.step",
      "lbr": "tps259823onrger.lbr"
    },
    "distributor_links": {
      "lcsc": "C2155762",
      "digikey": "296-53587-2-ND",
      "mouser": "595-TPS259823ONRGER"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T19:20:47Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-53587-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS259823ONRGER",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "IN",
        "type": "power_in",
        "description": "Power input to the eFuse, operating range 2.7 V to 24 V with an absolute maximum of 30 V."
      },
      {
        "number": "2",
        "name": "IN",
        "type": "power_in",
        "description": "Power input to the eFuse, operating range 2.7 V to 24 V with an absolute maximum of 30 V."
      },
      {
        "number": "3",
        "name": "IN",
        "type": "power_in",
        "description": "Power input to the eFuse, operating range 2.7 V to 24 V with an absolute maximum of 30 V."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Connect to system ground; the reference for all internal signals."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Connect to system ground; the reference for all internal signals."
      },
      {
        "number": "6",
        "name": "EN/UVLO",
        "type": "input",
        "description": "Active-high enable with adjustable UVLO set by a resistor divider from IN to GND; the pin must not be left floating and has an absolute maximum of 7 V."
      },
      {
        "number": "7",
        "name": "ITIMER",
        "type": "output",
        "description": "A capacitor to GND sets the overcurrent blanking interval; leave open for the fastest response, and shorting it to GND is detected as a fault that turns the device off."
      },
      {
        "number": "8",
        "name": "ILIM",
        "type": "output",
        "description": "A resistor to GND sets the output current-limit and fast-trip thresholds; the pin must not be left floating, and an open pin sets the limit to zero."
      },
      {
        "number": "9",
        "name": "IMON",
        "type": "output",
        "description": "Analog load-current monitor that sources a current proportional to load current (246 µA/A typical), converted to a voltage by a resistor to GND."
      },
      {
        "number": "10",
        "name": "RETRY_DLY",
        "type": "output",
        "description": "A capacitor to GND sets the delay before the device attempts an automatic restart after a fault; tying the pin to GND selects latch-off with no retry."
      },
      {
        "number": "11",
        "name": "NRETRY",
        "type": "output",
        "description": "A capacitor to GND sets the number of automatic restart attempts after a fault; tying the pin to GND selects unlimited retries."
      },
      {
        "number": "12",
        "name": "LDSTRT",
        "type": "input",
        "description": "Load detect/handshake input; a capacitor to GND sets the window in which the load must pull this pin low after PG asserts, tie to GND if unused, and the pin must not be left floating."
      },
      {
        "number": "13",
        "name": "PG",
        "type": "output",
        "description": "Active-high open-drain power-good output that requires an external pull-up, asserts when the FET is fully enhanced and output is at its maximum, and stays low when VIN is below VUVP; absolute maximum 7 V."
      },
      {
        "number": "14",
        "name": "GND",
        "type": "power_in",
        "description": "Connect to system ground; the reference for all internal signals."
      },
      {
        "number": "15",
        "name": "dVdt",
        "type": "input",
        "description": "A capacitor to GND sets the output turn-on slew rate; leave open for the fastest ramp during start-up, with a capacitor voltage rating of VIN + 4 V."
      },
      {
        "number": "16",
        "name": "IN",
        "type": "power_in",
        "description": "Power input to the eFuse, operating range 2.7 V to 24 V with an absolute maximum of 30 V."
      },
      {
        "number": "17",
        "name": "OUT",
        "type": "power_out",
        "description": "Switched power output to the load from the internal FET; absolute range is -0.8 V to the lesser of 30 V or VIN + 0.3 V."
      },
      {
        "number": "18",
        "name": "OUT",
        "type": "power_out",
        "description": "Switched power output to the load from the internal FET; absolute range is -0.8 V to the lesser of 30 V or VIN + 0.3 V."
      },
      {
        "number": "19",
        "name": "OUT",
        "type": "power_out",
        "description": "Switched power output to the load from the internal FET; absolute range is -0.8 V to the lesser of 30 V or VIN + 0.3 V."
      },
      {
        "number": "20",
        "name": "OUT",
        "type": "power_out",
        "description": "Switched power output to the load from the internal FET; absolute range is -0.8 V to the lesser of 30 V or VIN + 0.3 V."
      },
      {
        "number": "21",
        "name": "OUT",
        "type": "power_out",
        "description": "Switched power output to the load from the internal FET; absolute range is -0.8 V to the lesser of 30 V or VIN + 0.3 V."
      },
      {
        "number": "22",
        "name": "OUT",
        "type": "power_out",
        "description": "Switched power output to the load from the internal FET; absolute range is -0.8 V to the lesser of 30 V or VIN + 0.3 V."
      },
      {
        "number": "23",
        "name": "OUT",
        "type": "power_out",
        "description": "Switched power output to the load from the internal FET; absolute range is -0.8 V to the lesser of 30 V or VIN + 0.3 V."
      },
      {
        "number": "24",
        "name": "OUT",
        "type": "power_out",
        "description": "Switched power output to the load from the internal FET; absolute range is -0.8 V to the lesser of 30 V or VIN + 0.3 V."
      },
      {
        "number": "25",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Thermal pads are printed as 'Thermal Pad 1' and 'Thermal Pad 2' in the pin figure and were not given; The datasheet classifies ITIMER, ILIM, IMON, RETRY_DLY, NRETRY and dVdt as 'analog output' (模拟输出) an; The source datasheet is a Chinese translation (ZHCSIW7D). The pin table is in the document, so the p",
          "exposed pad 25 added from the footprint",
          "dropped thermal pad ['THERMALPAD1', 'THERMALPAD2'] absent from footprint"
        ],
        "pages_sent": 42,
        "cost_usd": 0.2115,
        "at": "2026-10-08T19:20:11"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/ds/symlink/tps25982.pdf",
        "pages": 55,
        "sha256": "f4a0f06cfbd81f26",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 25,
        "described": 25,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps259823onrger.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          4.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f7d256794c4147daf24dcae0554fae18510315e565ad1e239b475be7fef80d8b",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps259823onrger-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          4.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5e56b0d1f55c759f68f2daadd1958ff67c3136d685553ec85b6828c44503813e",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}