TPS259807ONRGER

{
  "slug": "tps259807onrger",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Surge Suppressors, VQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "tvs-fuse-board level protection",
    "tps259807onrger",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps259807onrger.kicad_sym",
    "tps259807onrger.kicad_mod",
    "tps259807onrger.glb",
    "tps259807onrger.step",
    "tps259807onrger.lbr",
    "docs/hero.png",
    "docs/tps259807onrger-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps259807onrger-hero.glb",
    "tps259807onrger-hero.overlay.json",
    "tps259807onrger-etched.glb"
  ],
  "component": {
    "mpn": "TPS259807ONRGER",
    "manufacturer": "Texas Instruments",
    "package": "VQFN-24-EP(4x4)",
    "pin_count": 25,
    "category": "TVS/Fuse/Board Level Protection",
    "subcategory": "Surge Suppressors",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tps259807onrger.pdf",
    "parts": {
      "symbol": "tps259807onrger.kicad_sym",
      "footprint": "tps259807onrger.kicad_mod",
      "model_3d": "tps259807onrger-hero.glb",
      "model_3d_plain": "tps259807onrger-etched.glb",
      "model_3d_step": "tps259807onrger-etched.step",
      "model_3d_step_plain": "tps259807onrger.step",
      "lbr": "tps259807onrger.lbr"
    },
    "distributor_links": {
      "lcsc": "C2868416",
      "digikey": "296-TPS259807ONRGERTR-ND",
      "mouser": "595-TPS259807ONRGER"
    },
    "distributor_check": {
      "checked_at": "2026-10-23T03:20:11Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-TPS259807ONRGERTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS259807ONRGER",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "IN",
        "type": "power_in",
        "description": "Power input; the IN pins and the exposed Pad 1 carry the input supply (2.7 V to 24 V operating, 30 V absolute maximum)."
      },
      {
        "number": "2",
        "name": "IN",
        "type": "power_in",
        "description": "Power input; the IN pins and the exposed Pad 1 carry the input supply (2.7 V to 24 V operating, 30 V absolute maximum)."
      },
      {
        "number": "3",
        "name": "IN",
        "type": "power_in",
        "description": "Power input; the IN pins and the exposed Pad 1 carry the input supply (2.7 V to 24 V operating, 30 V absolute maximum)."
      },
      {
        "number": "16",
        "name": "IN",
        "type": "power_in",
        "description": "Power input; the IN pins and the exposed Pad 1 carry the input supply (2.7 V to 24 V operating, 30 V absolute maximum)."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Connect to system ground."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Connect to system ground."
      },
      {
        "number": "14",
        "name": "GND",
        "type": "power_in",
        "description": "Connect to system ground."
      },
      {
        "number": "6",
        "name": "EN/UVLO",
        "type": "input",
        "description": "Active-high enable; a resistor divider from the input supply to GND adjusts the undervoltage lockout threshold, absolute maximum 7 V, do not leave floating."
      },
      {
        "number": "7",
        "name": "ITIMER",
        "type": "passive",
        "description": "A capacitor to GND sets the overcurrent blanking interval before the overcurrent response acts; leave open for fastest response, shorting to GND is detected as a fault."
      },
      {
        "number": "8",
        "name": "ILIM",
        "type": "passive",
        "description": "An external resistor to GND sets the output current limit and fast-trip thresholds (fast trip = 2.1 x ILIM); do not leave floating."
      },
      {
        "number": "9",
        "name": "IMON",
        "type": "output",
        "description": "Analog load current monitor that sources a current proportional to load current, converted to voltage by a resistor to GND."
      },
      {
        "number": "10",
        "name": "RETRY_DLY",
        "type": "passive",
        "description": "A capacitor to GND sets the delay after a fault shutdown before automatic restart; connect to GND for latch-off operation."
      },
      {
        "number": "11",
        "name": "NRETRY",
        "type": "passive",
        "description": "A capacitor to GND sets the number of automatic restart attempts after a fault shutdown; connect to GND for indefinite retries."
      },
      {
        "number": "12",
        "name": "LDSTRT",
        "type": "input",
        "description": "Load detect/handshake input; a capacitor to GND sets the time after PG assertion within which the pin must be pulled low, absolute maximum 7 V, connect to GND if unused, do not leave floating."
      },
      {
        "number": "13",
        "name": "PG",
        "type": "output",
        "description": "Active-high open-drain power good indication needing an external pull-up, asserted when the FET is fully enhanced and output has reached maximum voltage, absolute maximum 7 V."
      },
      {
        "number": "15",
        "name": "dVdt",
        "type": "passive",
        "description": "A capacitor to GND sets the output turn-on slew rate; leave floating for the fastest start-up slew rate."
      },
      {
        "number": "17",
        "name": "OUT",
        "type": "power_out",
        "description": "Power output."
      },
      {
        "number": "18",
        "name": "OUT",
        "type": "power_out",
        "description": "Power output."
      },
      {
        "number": "19",
        "name": "OUT",
        "type": "power_out",
        "description": "Power output."
      },
      {
        "number": "20",
        "name": "OUT",
        "type": "power_out",
        "description": "Power output."
      },
      {
        "number": "21",
        "name": "OUT",
        "type": "power_out",
        "description": "Power output."
      },
      {
        "number": "22",
        "name": "OUT",
        "type": "power_out",
        "description": "Power output."
      },
      {
        "number": "23",
        "name": "OUT",
        "type": "power_out",
        "description": "Power output."
      },
      {
        "number": "24",
        "name": "OUT",
        "type": "power_out",
        "description": "Power output."
      },
      {
        "number": "25",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet labels the exposed pads 'Pad 1' (IN) and 'Pad 2' (GND) instead of numbering them. I us; The datasheet lists ITIMER, ILIM, RETRY_DLY, NRETRY and dVdt as 'Analog Output'. They connect to pas; PG is an open-drain output. I typed it as output, but open_collector-style handling may be preferred"
        ],
        "pages_sent": 12,
        "cost_usd": 0.1296,
        "at": "2026-10-23T03:19:57"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tps259807onrger.pdf",
        "pages": 52,
        "sha256": "b72f89671f163ccc",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 25,
        "described": 25,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps259807onrger.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          4.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "096fc110543e6d324c5120c2d38e3dca87a389da9b6fac234f1fe40856295ef4",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps259807onrger-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          4.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "7d70318f6237cf381fd933d15e3c7bc0b1af34c19a5aaaeab2e4b1421b95610b",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}