component
TPS25940AQRVCTQ1
Public Made by Adomby adom
Texas Instruments Surge Protection Devices (SPDs), WQFN-20(4x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+58@@ -0,0 +1,58 @@+# TPS25940AQRVCTQ1++**Texas Instruments** · Surge Protection Devices (SPDs) · WQFN-20(4x3)++TPS25940AQRVCTQ1 from Texas Instruments, in a WQFN-20(4x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | DEVSLP | input | Active-high DevSleep low-power mode control; rising threshold 1.6 V min / 1.85 V typ / 2.0 V max, falling 0.8 V min / 0.96 V typ / 1.1 V max; input leakage 0.6-1.25 µA; leave floating or connect to GND if unused. |+| 2 | PGOOD | output | Active-high open-drain power-good output; asserted high when PGTH > V(PGTHR) = 0.99 V (typ) and internal FET is fully enhanced; internal pull-down 10-35 Ω; max sink current 10 mA; leave floating if unused. |+| 3 | PGTH | input | Positive input of the internal power-good comparator; rising threshold V(PGTHR) = 0.97-1.01 V, falling V(PGTHF) = 0.90-0.94 V; leakage ±100 nA max; connect to OUT or GND if unused. |+| 4 | OUT | power_out | Switched power output; one of five paralleled OUT pins (4-8); total RON = 34-64 mΩ (-40 °C to +125 °C); max continuous switch current 4.78 A at TA = 85 °C; all OUT pins must be tied together and connected to the load. |+| 5 | OUT | power_out | Switched power output; paralleled with pins 4, 6, 7, 8; all OUT pins must be connected together and to the load. |+| 6 | OUT | power_out | Switched power output; paralleled with pins 4, 5, 7, 8; all OUT pins must be connected together and to the load. |+| 7 | OUT | power_out | Switched power output; paralleled with pins 4, 5, 6, 8; all OUT pins must be connected together and to the load. |+| 8 | OUT | power_out | Switched power output; paralleled with pins 4, 5, 6, 7; all OUT pins must be connected together and to the load. |+| 9 | IN | power_in | Power input and device supply voltage; operating range 2.7 V to 18 V (20 V abs max, 22 V for 10 ms transient); IQ(ON) = 140-270 µA; one of five paralleled IN pins (9-13); all IN pins must be connected together. |+| 10 | IN | power_in | Power input; paralleled with pins 9, 11, 12, 13; all IN pins must be connected together and to the power source. |+| 11 | IN | power_in | Power input; paralleled with pins 9, 10, 12, 13; all IN pins must be connected together and to the power source. |+| 12 | IN | power_in | Power input; paralleled with pins 9, 10, 11, 13; all IN pins must be connected together and to the power source. |+| 13 | IN | power_in | Power input; paralleled with pins 9, 10, 11, 12; all IN pins must be connected together and to the power source. |+| 14 | EN/UVLO | input | Enable and programmable undervoltage lockout input; FET turns off when V < V(ENF) = 0.92 V (typ); device enters low-IQ shutdown (IQ < 15 µA) when V < V(SHUTF) = 0.47 V (typ); pin must not be left floating; connect to IN if UVLO not needed. |+| 15 | OVP | input | Overvoltage protection threshold-setting input; FET opens and FLT asserts when V(OVP) > V(OVPR) = 0.99 V (typ); OVP disable delay 2 µs (typ); tie to GND when not used; leakage ±100 nA max. |+| 16 | GND | power_in | Ground reference for all voltages; must be connected to the exposed PowerPAD (pin 21); PowerPAD must be soldered to PCB ground plane with multiple vias for thermal performance; RθJCbot = 3.4 °C/W. |+| 17 | ILIM | passive | Current-limit programming pin; external resistor from ILIM to GND sets overload and short-circuit current limit via I(LIM) = 89 / R(ILIM); V(ILIM) bias = 0.87 V (typ); R(ILIM) range 16.9 kΩ to 150 kΩ corresponding to I(LIM) 5.3 A to 0.6 A (±8% accuracy). |+| 18 | dVdT | passive | Output voltage ramp-rate control pin; external capacitor from dVdT to GND sets output slew rate; I(dVdT) charging current = 1 µA (typ), V(dVdTmax) = 2.88 V (typ), GAIN(dVdT) = 11.9 V/V (typ); leave floating for internal 30 V/ms ramp; C(dVdT) up to 470 nF. |+| 19 | IMON | output | Analog current monitor output; sources a scaled current proportional to I(OUT) with GAIN(IMON) = 52.3 µA/A (typ), accuracy ±8% for TPS25940A-Q1; external resistor from IMON to GND converts to voltage; max output voltage min([V(IN) - 2.2 V], 6 V); leave floating if unused. |+| 20 | FLT | output | Active-low open-drain fault indicator; asserts low for undervoltage, overvoltage, reverse voltage (V(REVTH) = -66 mV typ), or thermal shutdown events; internal pull-down resistance 10-30 Ω; max sink current 10 mA; leave open or tie to GND if unused. |+| 21 | EP | power_in | Exposed PowerPAD (thermal pad); at GND potential; RθJCbot = 3.4 °C/W; must be soldered to PCB ground plane with multiple vias for optimal thermal and mechanical performance. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WQFN-20(4x3) |+| Category | Circuit Protection |+| Pins | 21 |++## CAD (KiCad official)++- Symbol: `TPS25940AQRVCTQ1`+- Footprint: `Package_DFN_QFN:QFN-20-1EP_3x4mm_P0.5mm_EP1.65x2.65mm`+- 3D model: WQFN-20(4x3) (KiCad packages3D, STEP)+- 3D model files: `tps25940aqrvctq1-etched.step` / `tps25940aqrvctq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps25940aqrvctq1.step` / `tps25940aqrvctq1.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps25940-q1) (51 pp, sha256 `a1b7de698cb52759`, retrieved 2026-09-26, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps25940aqrvctq1-datasheet.pdf)
page.jsonadded+236@@ -0,0 +1,236 @@+{+ "slug": "tps25940aqrvctq1",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Surge Protection Devices (SPDs), WQFN-20(4x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "circuit protection",+ "tps25940aqrvctq1",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps25940aqrvctq1.kicad_sym",+ "tps25940aqrvctq1.kicad_mod",+ "tps25940aqrvctq1.glb",+ "tps25940aqrvctq1.step",+ "tps25940aqrvctq1.lbr",+ "docs/hero.png",+ "docs/tps25940aqrvctq1-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TPS25940AQRVCTQ1",+ "manufacturer": "Texas Instruments",+ "package": "WQFN-20(4x3)",+ "pin_count": 21,+ "category": "Circuit Protection",+ "subcategory": "Surge Protection Devices (SPDs)",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps25940-q1",+ "parts": {+ "symbol": "tps25940aqrvctq1.kicad_sym",+ "footprint": "tps25940aqrvctq1.kicad_mod",+ "model_3d": "tps25940aqrvctq1-etched.glb",+ "model_3d_plain": "tps25940aqrvctq1.glb",+ "model_3d_step": "tps25940aqrvctq1-etched.step",+ "model_3d_step_plain": "tps25940aqrvctq1.step",+ "lbr": "tps25940aqrvctq1.lbr"+ },+ "distributor_links": {+ "lcsc": "C2155733",+ "digikey": "296-49001-2-ND",+ "mouser": "595-TPS25940AQRVCTQ1"+ },+ "distributor_check": {+ "checked_at": "2026-09-26T19:14:57Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-49001-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TPS25940AQRVCTQ1",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "DEVSLP",+ "type": "input",+ "description": "Active-high DevSleep low-power mode control; rising threshold 1.6 V min / 1.85 V typ / 2.0 V max, falling 0.8 V min / 0.96 V typ / 1.1 V max; input leakage 0.6-1.25 µA; leave floating or connect to GND if unused."+ },+ {+ "number": "2",+ "name": "PGOOD",+ "type": "output",+ "description": "Active-high open-drain power-good output; asserted high when PGTH > V(PGTHR) = 0.99 V (typ) and internal FET is fully enhanced; internal pull-down 10-35 Ω; max sink current 10 mA; leave floating if unused."+ },+ {+ "number": "3",+ "name": "PGTH",+ "type": "input",+ "description": "Positive input of the internal power-good comparator; rising threshold V(PGTHR) = 0.97-1.01 V, falling V(PGTHF) = 0.90-0.94 V; leakage ±100 nA max; connect to OUT or GND if unused."+ },+ {+ "number": "4",+ "name": "OUT",+ "type": "power_out",+ "description": "Switched power output; one of five paralleled OUT pins (4-8); total RON = 34-64 mΩ (-40 °C to +125 °C); max continuous switch current 4.78 A at TA = 85 °C; all OUT pins must be tied together and connected to the load."+ },+ {+ "number": "5",+ "name": "OUT",+ "type": "power_out",+ "description": "Switched power output; paralleled with pins 4, 6, 7, 8; all OUT pins must be connected together and to the load."+ },+ {+ "number": "6",+ "name": "OUT",+ "type": "power_out",+ "description": "Switched power output; paralleled with pins 4, 5, 7, 8; all OUT pins must be connected together and to the load."+ },+ {+ "number": "7",+ "name": "OUT",+ "type": "power_out",+ "description": "Switched power output; paralleled with pins 4, 5, 6, 8; all OUT pins must be connected together and to the load."+ },+ {+ "number": "8",+ "name": "OUT",+ "type": "power_out",+ "description": "Switched power output; paralleled with pins 4, 5, 6, 7; all OUT pins must be connected together and to the load."+ },+ {+ "number": "9",+ "name": "IN",+ "type": "power_in",+ "description": "Power input and device supply voltage; operating range 2.7 V to 18 V (20 V abs max, 22 V for 10 ms transient); IQ(ON) = 140-270 µA; one of five paralleled IN pins (9-13); all IN pins must be connected together."+ },+ {+ "number": "10",+ "name": "IN",+ "type": "power_in",+ "description": "Power input; paralleled with pins 9, 11, 12, 13; all IN pins must be connected together and to the power source."+ },+ {+ "number": "11",+ "name": "IN",+ "type": "power_in",+ "description": "Power input; paralleled with pins 9, 10, 12, 13; all IN pins must be connected together and to the power source."+ },+ {+ "number": "12",+ "name": "IN",+ "type": "power_in",+ "description": "Power input; paralleled with pins 9, 10, 11, 13; all IN pins must be connected together and to the power source."+ },+ {+ "number": "13",+ "name": "IN",+ "type": "power_in",+ "description": "Power input; paralleled with pins 9, 10, 11, 12; all IN pins must be connected together and to the power source."+ },+ {+ "number": "14",+ "name": "EN/UVLO",+ "type": "input",+ "description": "Enable and programmable undervoltage lockout input; FET turns off when V < V(ENF) = 0.92 V (typ); device enters low-IQ shutdown (IQ < 15 µA) when V < V(SHUTF) = 0.47 V (typ); pin must not be left floating; connect to IN if UVLO not needed."+ },+ {+ "number": "15",+ "name": "OVP",+ "type": "input",+ "description": "Overvoltage protection threshold-setting input; FET opens and FLT asserts when V(OVP) > V(OVPR) = 0.99 V (typ); OVP disable delay 2 µs (typ); tie to GND when not used; leakage ±100 nA max."+ },+ {+ "number": "16",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for all voltages; must be connected to the exposed PowerPAD (pin 21); PowerPAD must be soldered to PCB ground plane with multiple vias for thermal performance; RθJCbot = 3.4 °C/W."+ },+ {+ "number": "17",+ "name": "ILIM",+ "type": "passive",+ "description": "Current-limit programming pin; external resistor from ILIM to GND sets overload and short-circuit current limit via I(LIM) = 89 / R(ILIM); V(ILIM) bias = 0.87 V (typ); R(ILIM) range 16.9 kΩ to 150 kΩ corresponding to I(LIM) 5.3 A to 0.6 A (±8% accuracy)."+ },+ {+ "number": "18",+ "name": "dVdT",+ "type": "passive",+ "description": "Output voltage ramp-rate control pin; external capacitor from dVdT to GND sets output slew rate; I(dVdT) charging current = 1 µA (typ), V(dVdTmax) = 2.88 V (typ), GAIN(dVdT) = 11.9 V/V (typ); leave floating for internal 30 V/ms ramp; C(dVdT) up to 470 nF."+ },+ {+ "number": "19",+ "name": "IMON",+ "type": "output",+ "description": "Analog current monitor output; sources a scaled current proportional to I(OUT) with GAIN(IMON) = 52.3 µA/A (typ), accuracy ±8% for TPS25940A-Q1; external resistor from IMON to GND converts to voltage; max output voltage min([V(IN) - 2.2 V], 6 V); leave floating if unused."+ },+ {+ "number": "20",+ "name": "FLT",+ "type": "output",+ "description": "Active-low open-drain fault indicator; asserts low for undervoltage, overvoltage, reverse voltage (V(REVTH) = -66 mV typ), or thermal shutdown events; internal pull-down resistance 10-30 Ω; max sink current 10 mA; leave open or tie to GND if unused."+ },+ {+ "number": "21",+ "name": "EP",+ "type": "power_in",+ "description": "Exposed PowerPAD (thermal pad); at GND potential; RθJCbot = 3.4 °C/W; must be soldered to PCB ground plane with multiple vias for optimal thermal and mechanical performance."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "exposed pad 21 added from the footprint"+ ],+ "pages_sent": 51,+ "cost_usd": 0.568,+ "at": "2026-09-26T19:14:39"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps25940-q1",+ "pages": 51,+ "sha256": "a1b7de698cb52759",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 21,+ "described": 21,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}