main
History Download
Ray Initial commit: component/tps25921adr 32ae1ec

TPS25921ADR

Texas Instruments · Supervisor And Reset ICs · SOIC-8

TPS25921ADR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground reference for all circuit operations and voltage measurements.
2 SS input Soft-start control pin; external capacitor sets output voltage ramp rate during power-on with charging current of 0.9 to 1.2 µA typical and maximum capacitor voltage of 5.5 V.
3 ENUV input Enable and undervoltage lockout input; external resistor divider programs UVLO threshold with rising threshold of 1.36 to 1.42 V, and voltage below 0.5 to 0.8 V resets thermal fault latch in TPS25921L.
4 IN power_in Power input pin; accepts supply voltage from 4.5 V to 18 V nominal (20 V maximum for 10 ms transient).
5 OUT power_out Power output pin; delivers current-limited power to the load with output voltage regulation and soft-start ramp control.
6 FLT output Fault indicator output (open-drain); active-low signal for undervoltage, overvoltage, or thermal shutdown faults with pull-down resistance of 22 to 32 Ω.
7 ILIM input Current limit programming input; external resistor from this pin to GND sets overcurrent limit from 0.4 A to 1.6 A with ±2% accuracy at 1 A and bias current of 6 to 16 µA.
8 OVP input Overvoltage protection input; external resistor divider programs overvoltage threshold with rising trip point of 1.35 to 1.43 V, triggering output disable when exceeded.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Power Management (PMIC)
Pins 8

CAD (KiCad official)

  • Symbol: TPS25921ADR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: tps25921adr-etched.step / tps25921adr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps25921adr.step / tps25921adr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (40 pp, sha256 c4fc910bc1512651, retrieved 2026-09-23, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF