← Commit history

Initial commit: component/tps25921adr

Ray ·32ae1ec3ef ·
2 files changed +185
README.mdadded+44
@@ -0,0 +1,44 @@+# TPS25921ADR++**Texas Instruments** · Supervisor And Reset ICs · SOIC-8++TPS25921ADR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | GND | power_in | Ground reference for all circuit operations and voltage measurements. |+| 2 | SS | input | Soft-start control pin; external capacitor sets output voltage ramp rate during power-on with charging current of 0.9 to 1.2 µA typical and maximum capacitor voltage of 5.5 V. |+| 3 | ENUV | input | Enable and undervoltage lockout input; external resistor divider programs UVLO threshold with rising threshold of 1.36 to 1.42 V, and voltage below 0.5 to 0.8 V resets thermal fault latch in TPS25921L. |+| 4 | IN | power_in | Power input pin; accepts supply voltage from 4.5 V to 18 V nominal (20 V maximum for 10 ms transient). |+| 5 | OUT | power_out | Power output pin; delivers current-limited power to the load with output voltage regulation and soft-start ramp control. |+| 6 | FLT | output | Fault indicator output (open-drain); active-low signal for undervoltage, overvoltage, or thermal shutdown faults with pull-down resistance of 22 to 32 Ω. |+| 7 | ILIM | input | Current limit programming input; external resistor from this pin to GND sets overcurrent limit from 0.4 A to 1.6 A with ±2% accuracy at 1 A and bias current of 6 to 16 µA. |+| 8 | OVP | input | Overvoltage protection input; external resistor divider programs overvoltage threshold with rising trip point of 1.35 to 1.43 V, triggering output disable when exceeded. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-8 |+| Category | Power Management (PMIC) |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `TPS25921ADR`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)+- 3D model files: `tps25921adr-etched.step` / `tps25921adr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps25921adr.step` / `tps25921adr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tps25921a.pdf) (40 pp, sha256 `c4fc910bc1512651`, retrieved 2026-09-23, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps25921adr-datasheet.pdf)
page.jsonadded+141
@@ -0,0 +1,141 @@+{+  "slug": "tps25921adr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Supervisor And Reset ICs, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "tps25921adr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tps25921adr.kicad_sym",+    "tps25921adr.kicad_mod",+    "tps25921adr.glb",+    "tps25921adr.step",+    "tps25921adr.lbr",+    "docs/hero.png",+    "docs/tps25921adr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TPS25921ADR",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-8",+    "pin_count": 8,+    "category": "Power Management (PMIC)",+    "subcategory": "Supervisor And Reset ICs",+    "datasheet": "https://www.ti.com/lit/ds/symlink/tps25921a.pdf",+    "parts": {+      "symbol": "tps25921adr.kicad_sym",+      "footprint": "tps25921adr.kicad_mod",+      "model_3d": "tps25921adr-etched.glb",+      "model_3d_plain": "tps25921adr.glb",+      "model_3d_step": "tps25921adr-etched.step",+      "model_3d_step_plain": "tps25921adr.step",+      "lbr": "tps25921adr.lbr"+    },+    "distributor_links": {+      "lcsc": "C189199"+    },+    "pins": [+      {+        "number": "1",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference for all circuit operations and voltage measurements."+      },+      {+        "number": "2",+        "name": "SS",+        "type": "input",+        "description": "Soft-start control pin; external capacitor sets output voltage ramp rate during power-on with charging current of 0.9 to 1.2 µA typical and maximum capacitor voltage of 5.5 V."+      },+      {+        "number": "3",+        "name": "ENUV",+        "type": "input",+        "description": "Enable and undervoltage lockout input; external resistor divider programs UVLO threshold with rising threshold of 1.36 to 1.42 V, and voltage below 0.5 to 0.8 V resets thermal fault latch in TPS25921L."+      },+      {+        "number": "4",+        "name": "IN",+        "type": "power_in",+        "description": "Power input pin; accepts supply voltage from 4.5 V to 18 V nominal (20 V maximum for 10 ms transient)."+      },+      {+        "number": "5",+        "name": "OUT",+        "type": "power_out",+        "description": "Power output pin; delivers current-limited power to the load with output voltage regulation and soft-start ramp control."+      },+      {+        "number": "6",+        "name": "FLT",+        "type": "output",+        "description": "Fault indicator output (open-drain); active-low signal for undervoltage, overvoltage, or thermal shutdown faults with pull-down resistance of 22 to 32 Ω."+      },+      {+        "number": "7",+        "name": "ILIM",+        "type": "input",+        "description": "Current limit programming input; external resistor from this pin to GND sets overcurrent limit from 0.4 A to 1.6 A with ±2% accuracy at 1 A and bias current of 6 to 16 µA."+      },+      {+        "number": "8",+        "name": "OVP",+        "type": "input",+        "description": "Overvoltage protection input; external resistor divider programs overvoltage threshold with rising trip point of 1.35 to 1.43 V, triggering output disable when exceeded."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 40,+        "cost_usd": 0.3666,+        "at": "2026-09-23T04:24:43"+      },+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/tps25921a.pdf",+        "pages": 40,+        "sha256": "c4fc910bc1512651",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file