main
Ray
tps2549rter: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
13b73b7
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232
{
"slug": "tps2549rter",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments Power Distribution Switches, WQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power management (pmic)",
"tps2549rter",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"tps2549rter.kicad_sym",
"tps2549rter.kicad_mod",
"tps2549rter.glb",
"tps2549rter.step",
"tps2549rter.lbr",
"docs/hero.png",
"docs/tps2549rter-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"component": {
"mpn": "TPS2549RTER",
"manufacturer": "Texas Instruments",
"package": "WQFN-16-EP(3x3)",
"pin_count": 17,
"category": "Power Management (PMIC)",
"subcategory": "Power Distribution Switches",
"datasheet": "https://www.ti.com/cn/lit/gpn/tps2549",
"parts": {
"symbol": "tps2549rter.kicad_sym",
"footprint": "tps2549rter.kicad_mod",
"model_3d": "tps2549rter-etched.glb",
"model_3d_plain": "tps2549rter.glb",
"model_3d_step": "tps2549rter-etched.step",
"model_3d_step_plain": "tps2549rter.step",
"lbr": "tps2549rter.lbr"
},
"distributor_links": {
"lcsc": "C2150133"
},
"pins": [
{
"number": "1",
"name": "IN",
"type": "power_in",
"description": "Input supply voltage, 4.5 V to 6.5 V; connect a 0.1 µF or greater ceramic capacitor from IN to GND as close to the IC as possible."
},
{
"number": "2",
"name": "DM_OUT",
"type": "bidirectional",
"description": "D- data line to upstream USB host controller."
},
{
"number": "3",
"name": "DP_OUT",
"type": "bidirectional",
"description": "D+ data line to upstream USB host controller."
},
{
"number": "4",
"name": "CS",
"type": "output",
"description": "Provide sink current proportional to output current, 75 µA/A; for cable compensation, connect to the feedback divider of the up-stream voltage regulator."
},
{
"number": "5",
"name": "EN",
"type": "input",
"description": "Logic-level control input for turning the power switch and the signal switches on/off; when EN is low, the device is disabled and the signal and power switches are OFF."
},
{
"number": "6",
"name": "CTL1",
"type": "input",
"description": "Logic-level control input for controlling the charging mode and the signal switches; ties directly to IN or GND without a pullup or pulldown resistor."
},
{
"number": "7",
"name": "CTL2",
"type": "input",
"description": "Logic-level control input for controlling the charging mode and the signal switches; ties directly to IN or GND without a pullup or pulldown resistor."
},
{
"number": "8",
"name": "CTL3",
"type": "input",
"description": "Logic-level control input for controlling the charging mode and the signal switches; ties directly to IN or GND without a pullup or pulldown resistor."
},
{
"number": "9",
"name": "STATUS",
"type": "output",
"description": "Active-low open-drain output, asserted when the load exceeds the load-detection threshold; 10 mA maximum continuous output sink current."
},
{
"number": "10",
"name": "DP_IN",
"type": "bidirectional",
"description": "D+ data line to downstream connector; maximum voltage ±5.7 V with respect to GND."
},
{
"number": "11",
"name": "DM_IN",
"type": "bidirectional",
"description": "D- data line to downstream connector; maximum voltage ±5.7 V with respect to GND."
},
{
"number": "12",
"name": "OUT",
"type": "power_out",
"description": "Power-switch output; 47 mΩ typical on-resistance MOSFET with 3 A maximum continuous current capability."
},
{
"number": "13",
"name": "FAULT",
"type": "output",
"description": "Active-low open-drain output, asserted during overtemperature, overcurrent, and DP_IN and DM_IN overvoltage conditions; 25 mA maximum continuous output sink current."
},
{
"number": "14",
"name": "GND",
"type": "power_in",
"description": "Ground connection; should be connected externally to the thermal pad and connected to the GND plane."
},
{
"number": "15",
"name": "ILIM_LO",
"type": "input",
"description": "Connect external resistor to ground to set the low current-limit threshold and the load-detection current threshold; 15.4 kΩ to 1000 kΩ recommended."
},
{
"number": "16",
"name": "ILIM_HI",
"type": "input",
"description": "Connect external resistor to ground to set the high current-limit threshold; 15.4 kΩ to 1000 kΩ recommended."
},
{
"number": "17",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.2",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.2",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Thermal pad (bottom of package, internally connected to GND) is present but not numbered as a standa",
"exposed pad 17 added from the footprint"
],
"pages_sent": 43,
"cost_usd": 0.3842,
"at": "2026-09-24T08:23:27"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/tps2549",
"pages": 43,
"sha256": "92bc12ea35bdb3a7",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 17,
"described": 17,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "tps2549rter.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3.0,
3.0,
0.785
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "tps2549rter-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3.0,
3.0,
0.785
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "a7fde4dbf05828d13376f38e574757f1d275b7b94eb3e38ad78bab51349af39e",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}