← Commit history

tps2549rter: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·13b73b7870 · ·parent a986403
2 files changed +91−11
package.json+49−9
@@ -53,7 +53,7 @@         "number": "1",         "name": "IN",         "type": "power_in",-        "description": "Input supply voltage, 4.5 V to 6.5 V; connect a 0.1 \u00b5F or greater ceramic capacitor from IN to GND as close to the IC as possible."+        "description": "Input supply voltage, 4.5 V to 6.5 V; connect a 0.1 µF or greater ceramic capacitor from IN to GND as close to the IC as possible."       },       {         "number": "2",@@ -71,7 +71,7 @@         "number": "4",         "name": "CS",         "type": "output",-        "description": "Provide sink current proportional to output current, 75 \u00b5A/A; for cable compensation, connect to the feedback divider of the up-stream voltage regulator."+        "description": "Provide sink current proportional to output current, 75 µA/A; for cable compensation, connect to the feedback divider of the up-stream voltage regulator."       },       {         "number": "5",@@ -107,19 +107,19 @@         "number": "10",         "name": "DP_IN",         "type": "bidirectional",-        "description": "D+ data line to downstream connector; maximum voltage \u00b15.7 V with respect to GND."+        "description": "D+ data line to downstream connector; maximum voltage ±5.7 V with respect to GND."       },       {         "number": "11",         "name": "DM_IN",         "type": "bidirectional",-        "description": "D- data line to downstream connector; maximum voltage \u00b15.7 V with respect to GND."+        "description": "D- data line to downstream connector; maximum voltage ±5.7 V with respect to GND."       },       {         "number": "12",         "name": "OUT",         "type": "power_out",-        "description": "Power-switch output; 47 m\u03a9 typical on-resistance MOSFET with 3 A maximum continuous current capability."+        "description": "Power-switch output; 47 mΩ typical on-resistance MOSFET with 3 A maximum continuous current capability."       },       {         "number": "13",@@ -137,13 +137,13 @@         "number": "15",         "name": "ILIM_LO",         "type": "input",-        "description": "Connect external resistor to ground to set the low current-limit threshold and the load-detection current threshold; 15.4 k\u03a9 to 1000 k\u03a9 recommended."+        "description": "Connect external resistor to ground to set the low current-limit threshold and the load-detection current threshold; 15.4 kΩ to 1000 kΩ recommended."       },       {         "number": "16",         "name": "ILIM_HI",         "type": "input",-        "description": "Connect external resistor to ground to set the high current-limit threshold; 15.4 k\u03a9 to 1000 k\u03a9 recommended."+        "description": "Connect external resistor to ground to set the high current-limit threshold; 15.4 kΩ to 1000 kΩ recommended."       },       {         "number": "17",@@ -187,6 +187,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "tps2549rter.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          3.0,+          3.0,+          0.785+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "tps2549rter-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          3.0,+          3.0,+          0.785+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "a7fde4dbf05828d13376f38e574757f1d275b7b94eb3e38ad78bab51349af39e",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -172,7 +172,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "tps2549rter.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          3.0,+          3.0,+          0.785+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "tps2549rter-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          3.0,+          3.0,+          0.785+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "a7fde4dbf05828d13376f38e574757f1d275b7b94eb3e38ad78bab51349af39e",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -219,4 +259,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}