main
History Download
Ray Initial commit: component/tps2549rter 731323f

TPS2549RTER

Texas Instruments · Power Distribution Switches · WQFN-16-EP(3x3)

TPS2549RTER from Texas Instruments, in a WQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Input supply voltage, 4.5 V to 6.5 V; connect a 0.1 µF or greater ceramic capacitor from IN to GND as close to the IC as possible.
2 DM_OUT bidirectional D- data line to upstream USB host controller.
3 DP_OUT bidirectional D+ data line to upstream USB host controller.
4 CS output Provide sink current proportional to output current, 75 µA/A; for cable compensation, connect to the feedback divider of the up-stream voltage regulator.
5 EN input Logic-level control input for turning the power switch and the signal switches on/off; when EN is low, the device is disabled and the signal and power switches are OFF.
6 CTL1 input Logic-level control input for controlling the charging mode and the signal switches; ties directly to IN or GND without a pullup or pulldown resistor.
7 CTL2 input Logic-level control input for controlling the charging mode and the signal switches; ties directly to IN or GND without a pullup or pulldown resistor.
8 CTL3 input Logic-level control input for controlling the charging mode and the signal switches; ties directly to IN or GND without a pullup or pulldown resistor.
9 STATUS output Active-low open-drain output, asserted when the load exceeds the load-detection threshold; 10 mA maximum continuous output sink current.
10 DP_IN bidirectional D+ data line to downstream connector; maximum voltage ±5.7 V with respect to GND.
11 DM_IN bidirectional D- data line to downstream connector; maximum voltage ±5.7 V with respect to GND.
12 OUT power_out Power-switch output; 47 mΩ typical on-resistance MOSFET with 3 A maximum continuous current capability.
13 FAULT output Active-low open-drain output, asserted during overtemperature, overcurrent, and DP_IN and DM_IN overvoltage conditions; 25 mA maximum continuous output sink current.
14 GND power_in Ground connection; should be connected externally to the thermal pad and connected to the GND plane.
15 ILIM_LO input Connect external resistor to ground to set the low current-limit threshold and the load-detection current threshold; 15.4 kΩ to 1000 kΩ recommended.
16 ILIM_HI input Connect external resistor to ground to set the high current-limit threshold; 15.4 kΩ to 1000 kΩ recommended.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WQFN-16-EP(3x3)
Category Power Management (PMIC)
Pins 17

CAD (KiCad official)

  • Symbol: TPS2549RTER
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: WQFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: tps2549rter-etched.step / tps2549rter-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps2549rter.step / tps2549rter.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (43 pp, sha256 92bc12ea35bdb3a7, retrieved 2026-09-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF