← Commit history

Initial commit: component/tps2549rter

Ray ·731323fca6 ·
2 files changed +252
README.mdadded+54
@@ -0,0 +1,54 @@+# TPS2549RTER++**Texas Instruments** · Power Distribution Switches · WQFN-16-EP(3x3)++TPS2549RTER from Texas Instruments, in a WQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | IN | power_in | Input supply voltage, 4.5 V to 6.5 V; connect a 0.1 µF or greater ceramic capacitor from IN to GND as close to the IC as possible. |+| 2 | DM_OUT | bidirectional | D- data line to upstream USB host controller. |+| 3 | DP_OUT | bidirectional | D+ data line to upstream USB host controller. |+| 4 | CS | output | Provide sink current proportional to output current, 75 µA/A; for cable compensation, connect to the feedback divider of the up-stream voltage regulator. |+| 5 | EN | input | Logic-level control input for turning the power switch and the signal switches on/off; when EN is low, the device is disabled and the signal and power switches are OFF. |+| 6 | CTL1 | input | Logic-level control input for controlling the charging mode and the signal switches; ties directly to IN or GND without a pullup or pulldown resistor. |+| 7 | CTL2 | input | Logic-level control input for controlling the charging mode and the signal switches; ties directly to IN or GND without a pullup or pulldown resistor. |+| 8 | CTL3 | input | Logic-level control input for controlling the charging mode and the signal switches; ties directly to IN or GND without a pullup or pulldown resistor. |+| 9 | STATUS | output | Active-low open-drain output, asserted when the load exceeds the load-detection threshold; 10 mA maximum continuous output sink current. |+| 10 | DP_IN | bidirectional | D+ data line to downstream connector; maximum voltage ±5.7 V with respect to GND. |+| 11 | DM_IN | bidirectional | D- data line to downstream connector; maximum voltage ±5.7 V with respect to GND. |+| 12 | OUT | power_out | Power-switch output; 47 mΩ typical on-resistance MOSFET with 3 A maximum continuous current capability. |+| 13 | FAULT | output | Active-low open-drain output, asserted during overtemperature, overcurrent, and DP_IN and DM_IN overvoltage conditions; 25 mA maximum continuous output sink current. |+| 14 | GND | power_in | Ground connection; should be connected externally to the thermal pad and connected to the GND plane. |+| 15 | ILIM_LO | input | Connect external resistor to ground to set the low current-limit threshold and the load-detection current threshold; 15.4 kΩ to 1000 kΩ recommended. |+| 16 | ILIM_HI | input | Connect external resistor to ground to set the high current-limit threshold; 15.4 kΩ to 1000 kΩ recommended. |+| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WQFN-16-EP(3x3) |+| Category | Power Management (PMIC) |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `TPS2549RTER`+- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`+- 3D model: WQFN-16-EP(3x3) (KiCad packages3D, STEP)+- 3D model files: `tps2549rter-etched.step` / `tps2549rter-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps2549rter.step` / `tps2549rter.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps2549) (43 pp, sha256 `92bc12ea35bdb3a7`, retrieved 2026-09-24, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps2549rter-datasheet.pdf)
page.jsonadded+198
@@ -0,0 +1,198 @@+{+  "slug": "tps2549rter",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Power Distribution Switches, WQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "tps2549rter",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tps2549rter.kicad_sym",+    "tps2549rter.kicad_mod",+    "tps2549rter.glb",+    "tps2549rter.step",+    "tps2549rter.lbr",+    "docs/hero.png",+    "docs/tps2549rter-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TPS2549RTER",+    "manufacturer": "Texas Instruments",+    "package": "WQFN-16-EP(3x3)",+    "pin_count": 17,+    "category": "Power Management (PMIC)",+    "subcategory": "Power Distribution Switches",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tps2549",+    "parts": {+      "symbol": "tps2549rter.kicad_sym",+      "footprint": "tps2549rter.kicad_mod",+      "model_3d": "tps2549rter-etched.glb",+      "model_3d_plain": "tps2549rter.glb",+      "model_3d_step": "tps2549rter-etched.step",+      "model_3d_step_plain": "tps2549rter.step",+      "lbr": "tps2549rter.lbr"+    },+    "distributor_links": {+      "lcsc": "C2150133"+    },+    "pins": [+      {+        "number": "1",+        "name": "IN",+        "type": "power_in",+        "description": "Input supply voltage, 4.5 V to 6.5 V; connect a 0.1 µF or greater ceramic capacitor from IN to GND as close to the IC as possible."+      },+      {+        "number": "2",+        "name": "DM_OUT",+        "type": "bidirectional",+        "description": "D- data line to upstream USB host controller."+      },+      {+        "number": "3",+        "name": "DP_OUT",+        "type": "bidirectional",+        "description": "D+ data line to upstream USB host controller."+      },+      {+        "number": "4",+        "name": "CS",+        "type": "output",+        "description": "Provide sink current proportional to output current, 75 µA/A; for cable compensation, connect to the feedback divider of the up-stream voltage regulator."+      },+      {+        "number": "5",+        "name": "EN",+        "type": "input",+        "description": "Logic-level control input for turning the power switch and the signal switches on/off; when EN is low, the device is disabled and the signal and power switches are OFF."+      },+      {+        "number": "6",+        "name": "CTL1",+        "type": "input",+        "description": "Logic-level control input for controlling the charging mode and the signal switches; ties directly to IN or GND without a pullup or pulldown resistor."+      },+      {+        "number": "7",+        "name": "CTL2",+        "type": "input",+        "description": "Logic-level control input for controlling the charging mode and the signal switches; ties directly to IN or GND without a pullup or pulldown resistor."+      },+      {+        "number": "8",+        "name": "CTL3",+        "type": "input",+        "description": "Logic-level control input for controlling the charging mode and the signal switches; ties directly to IN or GND without a pullup or pulldown resistor."+      },+      {+        "number": "9",+        "name": "STATUS",+        "type": "output",+        "description": "Active-low open-drain output, asserted when the load exceeds the load-detection threshold; 10 mA maximum continuous output sink current."+      },+      {+        "number": "10",+        "name": "DP_IN",+        "type": "bidirectional",+        "description": "D+ data line to downstream connector; maximum voltage ±5.7 V with respect to GND."+      },+      {+        "number": "11",+        "name": "DM_IN",+        "type": "bidirectional",+        "description": "D- data line to downstream connector; maximum voltage ±5.7 V with respect to GND."+      },+      {+        "number": "12",+        "name": "OUT",+        "type": "power_out",+        "description": "Power-switch output; 47 mΩ typical on-resistance MOSFET with 3 A maximum continuous current capability."+      },+      {+        "number": "13",+        "name": "FAULT",+        "type": "output",+        "description": "Active-low open-drain output, asserted during overtemperature, overcurrent, and DP_IN and DM_IN overvoltage conditions; 25 mA maximum continuous output sink current."+      },+      {+        "number": "14",+        "name": "GND",+        "type": "power_in",+        "description": "Ground connection; should be connected externally to the thermal pad and connected to the GND plane."+      },+      {+        "number": "15",+        "name": "ILIM_LO",+        "type": "input",+        "description": "Connect external resistor to ground to set the low current-limit threshold and the load-detection current threshold; 15.4 kΩ to 1000 kΩ recommended."+      },+      {+        "number": "16",+        "name": "ILIM_HI",+        "type": "input",+        "description": "Connect external resistor to ground to set the high current-limit threshold; 15.4 kΩ to 1000 kΩ recommended."+      },+      {+        "number": "17",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Thermal pad (bottom of package, internally connected to GND) is present but not numbered as a standa",+          "exposed pad 17 added from the footprint"+        ],+        "pages_sent": 43,+        "cost_usd": 0.3842,+        "at": "2026-09-24T08:23:27"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tps2549",+        "pages": 43,+        "sha256": "92bc12ea35bdb3a7",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 17,+        "described": 17,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file