main
Ray tps2549irterq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) f7de845
{
  "slug": "tps2549irterq1",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments USB Converters, QFN-16-EP(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "tps2549irterq1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps2549irterq1.kicad_sym",
    "tps2549irterq1.kicad_mod",
    "tps2549irterq1.glb",
    "tps2549irterq1.step",
    "tps2549irterq1.lbr",
    "docs/hero.png",
    "docs/tps2549irterq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "TPS2549IRTERQ1",
    "manufacturer": "Texas Instruments",
    "package": "QFN-16-EP(3x3)",
    "pin_count": 17,
    "category": "Interface",
    "subcategory": "USB Converters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps2549-q1",
    "parts": {
      "symbol": "tps2549irterq1.kicad_sym",
      "footprint": "tps2549irterq1.kicad_mod",
      "model_3d": "tps2549irterq1-etched.glb",
      "model_3d_plain": "tps2549irterq1.glb",
      "model_3d_step": "tps2549irterq1-etched.step",
      "model_3d_step_plain": "tps2549irterq1.step",
      "lbr": "tps2549irterq1.lbr"
    },
    "distributor_links": {
      "lcsc": "C181611"
    },
    "pins": [
      {
        "number": "1",
        "name": "IN",
        "type": "power_in",
        "description": "Input supply voltage 4.5-6.5 V; connect 0.1 µF bypass capacitor as close as possible to the IC."
      },
      {
        "number": "2",
        "name": "DM_OUT",
        "type": "bidirectional",
        "description": "D- data line to upstream USB host controller with high-bandwidth analog switch (925 MHz bandwidth, 2-6 Ω on-resistance)."
      },
      {
        "number": "3",
        "name": "DP_OUT",
        "type": "bidirectional",
        "description": "D+ data line to upstream USB host controller with high-bandwidth analog switch (925 MHz bandwidth, 2-6 Ω on-resistance)."
      },
      {
        "number": "4",
        "name": "CS",
        "type": "output",
        "description": "Current-sink output providing proportional feedback (75 µA/A) proportional to OUT load current for cable-compensation loop."
      },
      {
        "number": "5",
        "name": "EN",
        "type": "input",
        "description": "Active-high logic input enabling power and signal switches (1.35 V rising threshold, 200 mV hysteresis); device enters UVLO at 4.1 V."
      },
      {
        "number": "6",
        "name": "CTL1",
        "type": "input",
        "description": "Logic-level control input for charging mode selection; tie directly to IN or GND without pullup or pulldown resistor."
      },
      {
        "number": "7",
        "name": "CTL2",
        "type": "input",
        "description": "Logic-level control input for charging mode selection; tie directly to IN or GND without pullup or pulldown resistor."
      },
      {
        "number": "8",
        "name": "CTL3",
        "type": "input",
        "description": "Logic-level control input for charging mode selection; tie directly to IN or GND without pullup or pulldown resistor."
      },
      {
        "number": "9",
        "name": "STATUS",
        "type": "tri_state",
        "description": "Active-low open-drain output asserts when load exceeds load-detection threshold (700 mA typical with 80.6 kΩ ILIM_LO resistor, 210 ms response time)."
      },
      {
        "number": "10",
        "name": "DP_IN",
        "type": "bidirectional",
        "description": "D+ data line from downstream connector with ESD protection (±8 kV contact discharge, ±15 kV air discharge per IEC 61000-4-2) and short-to-VBUS overvoltage protection (3.9 V trip threshold)."
      },
      {
        "number": "11",
        "name": "DM_IN",
        "type": "bidirectional",
        "description": "D- data line from downstream connector with ESD protection (±8 kV contact discharge, ±15 kV air discharge per IEC 61000-4-2) and short-to-VBUS overvoltage protection (3.9 V trip threshold)."
      },
      {
        "number": "12",
        "name": "OUT",
        "type": "power_out",
        "description": "Power-switch output with maximum continuous current 3.2 A and on-resistance 47 mΩ typical (47-80 mΩ over -40°C to 125°C)."
      },
      {
        "number": "13",
        "name": "FAULT",
        "type": "tri_state",
        "description": "Active-low open-drain output asserts on overtemperature (>155°C or >135°C in current-limit mode), overcurrent (>programmed IOS), or DP_IN/DM_IN overvoltage (>3.9 V) with 8 ms deglitch."
      },
      {
        "number": "14",
        "name": "GND",
        "type": "power_in",
        "description": "Ground connection; thermal pad internally connected to GND and must be soldered to PCB ground plane."
      },
      {
        "number": "15",
        "name": "ILIM_LO",
        "type": "input",
        "description": "Low current-limit setting input; connect external resistor to GND to program threshold using I(OS) = 53762 / [R(ILIM_LO) × 1.0021], range 10.4-1000 kΩ."
      },
      {
        "number": "16",
        "name": "ILIM_HI",
        "type": "input",
        "description": "High current-limit setting input; connect external resistor to GND to program threshold using I(OS) = 53762 / [R(ILIM_HI) × 1.0021], range 10.4-1000 kΩ."
      },
      {
        "number": "17",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "exposed pad 17 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 46,
        "cost_usd": 0.4378,
        "at": "2026-09-18T01:06:36"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps2549-q1",
        "pages": 46,
        "sha256": "4d8861e6d954954c",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 17,
        "described": 17,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps2549irterq1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          3.0,
          0.785
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps2549irterq1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          3.0,
          0.785
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "1d37d7ace92f23dc6275c3d071889564f09206424da8bf2ebb2d3b50c96b8b9c",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}