component
TPS2549IRTERQ1
Public Made by Adomby adom
Texas Instruments USB Converters, QFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
tps2549irterq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+95−15
package.json+53−13@@ -53,25 +53,25 @@ "number": "1", "name": "IN", "type": "power_in",- "description": "Input supply voltage 4.5-6.5 V; connect 0.1 \u00b5F bypass capacitor as close as possible to the IC."+ "description": "Input supply voltage 4.5-6.5 V; connect 0.1 µF bypass capacitor as close as possible to the IC." }, { "number": "2", "name": "DM_OUT", "type": "bidirectional",- "description": "D- data line to upstream USB host controller with high-bandwidth analog switch (925 MHz bandwidth, 2-6 \u03a9 on-resistance)."+ "description": "D- data line to upstream USB host controller with high-bandwidth analog switch (925 MHz bandwidth, 2-6 Ω on-resistance)." }, { "number": "3", "name": "DP_OUT", "type": "bidirectional",- "description": "D+ data line to upstream USB host controller with high-bandwidth analog switch (925 MHz bandwidth, 2-6 \u03a9 on-resistance)."+ "description": "D+ data line to upstream USB host controller with high-bandwidth analog switch (925 MHz bandwidth, 2-6 Ω on-resistance)." }, { "number": "4", "name": "CS", "type": "output",- "description": "Current-sink output providing proportional feedback (75 \u00b5A/A) proportional to OUT load current for cable-compensation loop."+ "description": "Current-sink output providing proportional feedback (75 µA/A) proportional to OUT load current for cable-compensation loop." }, { "number": "5",@@ -101,31 +101,31 @@ "number": "9", "name": "STATUS", "type": "tri_state",- "description": "Active-low open-drain output asserts when load exceeds load-detection threshold (700 mA typical with 80.6 k\u03a9 ILIM_LO resistor, 210 ms response time)."+ "description": "Active-low open-drain output asserts when load exceeds load-detection threshold (700 mA typical with 80.6 kΩ ILIM_LO resistor, 210 ms response time)." }, { "number": "10", "name": "DP_IN", "type": "bidirectional",- "description": "D+ data line from downstream connector with ESD protection (\u00b18 kV contact discharge, \u00b115 kV air discharge per IEC 61000-4-2) and short-to-VBUS overvoltage protection (3.9 V trip threshold)."+ "description": "D+ data line from downstream connector with ESD protection (±8 kV contact discharge, ±15 kV air discharge per IEC 61000-4-2) and short-to-VBUS overvoltage protection (3.9 V trip threshold)." }, { "number": "11", "name": "DM_IN", "type": "bidirectional",- "description": "D- data line from downstream connector with ESD protection (\u00b18 kV contact discharge, \u00b115 kV air discharge per IEC 61000-4-2) and short-to-VBUS overvoltage protection (3.9 V trip threshold)."+ "description": "D- data line from downstream connector with ESD protection (±8 kV contact discharge, ±15 kV air discharge per IEC 61000-4-2) and short-to-VBUS overvoltage protection (3.9 V trip threshold)." }, { "number": "12", "name": "OUT", "type": "power_out",- "description": "Power-switch output with maximum continuous current 3.2 A and on-resistance 47 m\u03a9 typical (47-80 m\u03a9 over -40\u00b0C to 125\u00b0C)."+ "description": "Power-switch output with maximum continuous current 3.2 A and on-resistance 47 mΩ typical (47-80 mΩ over -40°C to 125°C)." }, { "number": "13", "name": "FAULT", "type": "tri_state",- "description": "Active-low open-drain output asserts on overtemperature (>155\u00b0C or >135\u00b0C in current-limit mode), overcurrent (>programmed IOS), or DP_IN/DM_IN overvoltage (>3.9 V) with 8 ms deglitch."+ "description": "Active-low open-drain output asserts on overtemperature (>155°C or >135°C in current-limit mode), overcurrent (>programmed IOS), or DP_IN/DM_IN overvoltage (>3.9 V) with 8 ms deglitch." }, { "number": "14",@@ -137,13 +137,13 @@ "number": "15", "name": "ILIM_LO", "type": "input",- "description": "Low current-limit setting input; connect external resistor to GND to program threshold using I(OS) = 53762 / [R(ILIM_LO) \u00d7 1.0021], range 10.4-1000 k\u03a9."+ "description": "Low current-limit setting input; connect external resistor to GND to program threshold using I(OS) = 53762 / [R(ILIM_LO) × 1.0021], range 10.4-1000 kΩ." }, { "number": "16", "name": "ILIM_HI", "type": "input",- "description": "High current-limit setting input; connect external resistor to GND to program threshold using I(OS) = 53762 / [R(ILIM_HI) \u00d7 1.0021], range 10.4-1000 k\u03a9."+ "description": "High current-limit setting input; connect external resistor to GND to program threshold using I(OS) = 53762 / [R(ILIM_HI) × 1.0021], range 10.4-1000 kΩ." }, { "number": "17",@@ -187,6 +187,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "tps2549irterq1.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.0,+ 3.0,+ 0.785+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tps2549irterq1-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.0,+ 3.0,+ 0.785+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "1d37d7ace92f23dc6275c3d071889564f09206424da8bf2ebb2d3b50c96b8b9c",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -172,7 +172,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "tps2549irterq1.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.0,+ 3.0,+ 0.785+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tps2549irterq1-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.0,+ 3.0,+ 0.785+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "1d37d7ace92f23dc6275c3d071889564f09206424da8bf2ebb2d3b50c96b8b9c",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -220,4 +260,4 @@ "public": true }, "updated_at": "2026-09-25T11:53:32.927Z"-}+}