main
Ray Publish 0.1.0 d9d3f90
{
  "slug": "tps24772rger",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Supervisor And Reset ICs, VQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps24772rger",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps24772rger.kicad_sym",
    "tps24772rger.kicad_mod",
    "tps24772rger.glb",
    "tps24772rger.step",
    "tps24772rger.lbr",
    "docs/hero.png",
    "docs/tps24772rger-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps24772rger-hero.glb",
    "tps24772rger-hero.overlay.json",
    "tps24772rger-etched.glb"
  ],
  "component": {
    "mpn": "TPS24772RGER",
    "manufacturer": "Texas Instruments",
    "package": "VQFN-24-EP(4x4)",
    "pin_count": 25,
    "category": "Power Management (PMIC)",
    "subcategory": "Supervisor And Reset ICs",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tps24772.pdf",
    "parts": {
      "symbol": "tps24772rger.kicad_sym",
      "footprint": "tps24772rger.kicad_mod",
      "model_3d": "tps24772rger-hero.glb",
      "model_3d_plain": "tps24772rger-etched.glb",
      "model_3d_step": "tps24772rger-etched.step",
      "model_3d_step_plain": "tps24772rger.step",
      "lbr": "tps24772rger.lbr"
    },
    "distributor_links": {
      "lcsc": "C2653595",
      "mouser": "595-TPS24772RGER"
    },
    "distributor_check": {
      "checked_at": "2026-11-10T09:50:36Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "deferred",
        "error": "shared DigiKey quota guard: 902 calls left today"
      },
      "mouser": {
        "pn": "595-TPS24772RGER",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect. Tie to ground or leave floating."
      },
      {
        "number": "2",
        "name": "ENHS",
        "type": "input",
        "description": "Active-high Hot Swap enable input; the part turns on when the pin rises above 1.35 V and turns off below 1.3 V (50 mV hysteresis), and it connects to a resistor divider."
      },
      {
        "number": "3",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect. Tie to ground or leave floating."
      },
      {
        "number": "4",
        "name": "FLTb",
        "type": "output",
        "description": "Active-low open-drain fault output asserted for a Hot Swap MOSFET short, a fault-timer timeout, or over-temperature shutdown; sink current is limited to 2 mA in recommended operation (5 mA absolute maximum)."
      },
      {
        "number": "5",
        "name": "PGHS",
        "type": "output",
        "description": "Active-high open-drain power-good output; sink current is limited to 2 mA in recommended operation (5 mA absolute maximum)."
      },
      {
        "number": "6",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect. Tie to ground or leave floating."
      },
      {
        "number": "7",
        "name": "TINR",
        "type": "bidirectional",
        "description": "Inrush timer, which runs during start-up when the part is in current or power limit; the timer times out when the pin exceeds 1.35 V."
      },
      {
        "number": "8",
        "name": "TFLT",
        "type": "bidirectional",
        "description": "Fault timer, which runs during regular operation when an overcurrent condition exists; the timer times out when the pin exceeds 1.35 V."
      },
      {
        "number": "9",
        "name": "OV",
        "type": "input",
        "description": "Overvoltage comparator input with a 1.35 V rising threshold that connects to a resistor divider; HGATE is pulled low when OV exceeds the threshold, and it should be tied to ground when not used."
      },
      {
        "number": "10",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "11",
        "name": "PLIM",
        "type": "input",
        "description": "Power-limit programming pin; a resistor from this pin to GND sets the maximum Hot Swap FET power dissipation, with a recommended range of 4.99 kΩ to 500 kΩ (4.99 kΩ disables power limit)."
      },
      {
        "number": "12",
        "name": "IMON",
        "type": "bidirectional",
        "description": "Analog monitor and current-limit programming point; RIMON connects to ground, the recommended resistance is 1 kΩ to 6 kΩ, and the pin supports up to 30 pF of capacitance."
      },
      {
        "number": "13",
        "name": "IMONBUF",
        "type": "output",
        "description": "Buffered voltage output proportional to load current, with a 0 V to 3.0 V range; it can drive up to 100 pF of capacitance."
      },
      {
        "number": "14",
        "name": "VDD",
        "type": "power_in",
        "description": "Power supply; recommended operating range is 2.5 V to 18 V, with a 30 V absolute maximum."
      },
      {
        "number": "15",
        "name": "SET",
        "type": "input",
        "description": "Current-limit programming pin; a resistor from the positive terminal of the sense resistor to SET sets the current limit, with a recommended external resistance of 10 Ω to 400 Ω."
      },
      {
        "number": "16",
        "name": "FSTP",
        "type": "input",
        "description": "Fast-trip threshold programming pin; a resistor from the positive terminal of RSNS to FSTP sets the fast-trip threshold, with a recommended external resistance of 10 Ω to 4000 Ω."
      },
      {
        "number": "17",
        "name": "SENM",
        "type": "input",
        "description": "Current-sense input connected directly to the negative terminal of the sense resistor; recommended operating voltage is 2.5 V to 18 V."
      },
      {
        "number": "18",
        "name": "HGATE",
        "type": "output",
        "description": "Gate driver output for the external Hot Swap MOSFET; HGATE-to-OUTH must stay within the 15 V absolute maximum."
      },
      {
        "number": "19",
        "name": "OUTH",
        "type": "input",
        "description": "Output voltage sensor that connects to the source terminal of the Hot Swap N-channel MOSFET to monitor its power; recommended operating range is 0 V to 18 V."
      },
      {
        "number": "20",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect. Tie to ground or leave floating."
      },
      {
        "number": "21",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect. Tie to ground or leave floating."
      },
      {
        "number": "22",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect. Tie to ground or leave floating."
      },
      {
        "number": "23",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect. Tie to ground or leave floating."
      },
      {
        "number": "24",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect. Tie to ground or leave floating."
      },
      {
        "number": "25",
        "name": "Thermal pad",
        "type": "passive",
        "description": "Exposed thermal pad that must be soldered to the printed circuit board for thermal and mechanical performance; the datasheet does not state an electrical connection for it."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The thermal pad is labeled 25 only on the land-pattern drawings (pages 49-51). The datasheet gives n; The datasheet lists these as NC pins with the note 'Tie to ground or leave floating'. They are typed; The datasheet lists OUTH as type I (input). This is kept as printed."
        ],
        "pages_sent": 52,
        "cost_usd": 0.2338,
        "at": "2026-11-10T09:50:24"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tps24772.pdf",
        "pages": 52,
        "sha256": "37f953f4e5224b99",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 25,
        "described": 25,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps24772rger.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          4.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "096fc110543e6d324c5120c2d38e3dca87a389da9b6fac234f1fe40856295ef4",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps24772rger-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          4.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "7718948ab0893dc6fce00ca2c2f58435045bb1998b2a66068238b1ac228f4a49",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "RGE",
      "source_page": 49,
      "D": {
        "nom_mm": 4.0,
        "range_mm": [
          3.9,
          4.1
        ]
      },
      "E1": {
        "nom_mm": 4.0,
        "range_mm": [
          3.9,
          4.1
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.0,
        "range_mm": [
          null,
          1.0
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "tps24772rger.step",
        "verdict": "PASS",
        "reasons": [
          "height within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}