TPS2413D

{
  "slug": "tps2413d",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Power Distribution Switches, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps2413d",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps2413d.kicad_sym",
    "tps2413d.kicad_mod",
    "tps2413d.glb",
    "tps2413d.step",
    "tps2413d.lbr",
    "docs/hero.png",
    "docs/tps2413d-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps2413d-hero.glb",
    "tps2413d-hero.overlay.json"
  ],
  "component": {
    "mpn": "TPS2413D",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "Power Distribution Switches",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps2413",
    "parts": {
      "symbol": "tps2413d.kicad_sym",
      "footprint": "tps2413d.kicad_mod",
      "model_3d": "tps2413d-hero.glb",
      "model_3d_plain": "tps2413d.glb",
      "model_3d_step": "tps2413d-etched.step",
      "model_3d_step_plain": "tps2413d.step",
      "lbr": "tps2413d.lbr"
    },
    "distributor_links": {
      "lcsc": "C1523985",
      "digikey": "296-23786-5-ND",
      "mouser": "595-TPS2413D"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T14:36:41Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-23786-5-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS2413D",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VDD",
        "type": "power_in",
        "description": "Primary supply for the gate-drive charge pump and internal controls, which must be at least 3 V (VDD must exceed 3 V to meet the gate-drive specification) and may be higher or lower than the controlled bus voltage."
      },
      {
        "number": "2",
        "name": "RSET",
        "type": "input",
        "description": "A resistor from this pin to GND (1.5 kΩ to open-ended range) programs the fast turnoff threshold, where leaving it open gives a slightly positive threshold and the TPS2413 must use a negative threshold; RSET voltage is limited to -0.3 V to 7 V."
      },
      {
        "number": "3",
        "name": "RSVD",
        "type": "power_in",
        "description": "Reserved pin that must be connected to GND."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground that needs a low-impedance connection to the ground plane, since it carries several amperes of rapid discharge current when the external MOSFET turns off."
      },
      {
        "number": "5",
        "name": "GATE",
        "type": "output",
        "description": "Drives the gate of the external N-channel MOSFET relative to A using the BYP supply, is pulled to GND by a fast discharge on turnoff, and is rated -0.3 V to 30 V with GATE above BYP limited to 0.3 V."
      },
      {
        "number": "6",
        "name": "C",
        "type": "input",
        "description": "Voltage-sense input for the simulated diode cathode, connected to the MOSFET drain, with C allowed up to 18 V above A."
      },
      {
        "number": "7",
        "name": "A",
        "type": "input",
        "description": "Voltage-sense input for the simulated diode anode, connected to the MOSFET source and Kelvin connected to it, which also serves as the reference for the charge-pump supply on BYP and is limited to 7.5 V above C."
      },
      {
        "number": "8",
        "name": "BYP",
        "type": "bidirectional",
        "description": "Charge-pump output and gate-drive supply that needs a capacitor from BYP to A (2200 pF ceramic recommended), and shorting BYP to a voltage below A damages the device; BYP is rated -0.3 V to 30 V with BYP to A limited to 13 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet's pin diagram graphic is garbled in the text extraction, so pin numbers and names were; RSVD is typed PWR in the datasheet and mapped to power_in here; the datasheet only says it must be c; Pin A is typed as input (I) in the datasheet even though it also acts as the charge-pump reference; "
        ],
        "pages_sent": 11,
        "cost_usd": 0.0684,
        "at": "2026-10-08T14:36:24"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps2413",
        "pages": 31,
        "sha256": "2d4a1bb575996a87",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps2413d.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps2413d-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5a4855a752c142c26c615d917777cf97600f86dcabcb7f020734990f65ef2290",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}