component
TPS2413D
Public Made by Adomby adom
Texas Instruments Power Distribution Switches, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 1mo ago |
| viewers | 1mo ago |
| package.json | 1mo ago |
| page.json | 1mo ago |
| README.md | 1mo ago |
| tps2413d-etched.glb | 1mo ago |
| tps2413d-etched.step | 1mo ago |
| tps2413d-hero.glb | 1mo ago |
| tps2413d-hero.overlay.json | 1mo ago |
| tps2413d.glb | 1mo ago |
| tps2413d.kicad_mod | 1mo ago |
| tps2413d.kicad_sym | 1mo ago |
| tps2413d.lbr | 1mo ago |
| tps2413d.step | 1mo ago |
TPS2413D
Texas Instruments · Power Distribution Switches · SOIC-8
TPS2413D from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Primary supply for the gate-drive charge pump and internal controls, which must be at least 3 V (VDD must exceed 3 V to meet the gate-drive specification) and may be higher or lower than the controlled bus voltage. |
| 2 | RSET | input | A resistor from this pin to GND (1.5 kΩ to open-ended range) programs the fast turnoff threshold, where leaving it open gives a slightly positive threshold and the TPS2413 must use a negative threshold; RSET voltage is limited to -0.3 V to 7 V. |
| 3 | RSVD | power_in | Reserved pin that must be connected to GND. |
| 4 | GND | power_in | Device ground that needs a low-impedance connection to the ground plane, since it carries several amperes of rapid discharge current when the external MOSFET turns off. |
| 5 | GATE | output | Drives the gate of the external N-channel MOSFET relative to A using the BYP supply, is pulled to GND by a fast discharge on turnoff, and is rated -0.3 V to 30 V with GATE above BYP limited to 0.3 V. |
| 6 | C | input | Voltage-sense input for the simulated diode cathode, connected to the MOSFET drain, with C allowed up to 18 V above A. |
| 7 | A | input | Voltage-sense input for the simulated diode anode, connected to the MOSFET source and Kelvin connected to it, which also serves as the reference for the charge-pump supply on BYP and is limited to 7.5 V above C. |
| 8 | BYP | bidirectional | Charge-pump output and gate-drive supply that needs a capacitor from BYP to A (2200 pF ceramic recommended), and shorting BYP to a voltage below A damages the device; BYP is rated -0.3 V to 30 V with BYP to A limited to 13 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
TPS2413D - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tps2413d-etched.step/tps2413d-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps2413d.step/tps2413d.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (31 pp, sha256
2d4a1bb575996a87, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).