main
Ray tps2411pwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) d9c31fd
{
  "slug": "tps2411pwr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Power Distribution Switches, TSSOP-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps2411pwr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps2411pwr.kicad_sym",
    "tps2411pwr.kicad_mod",
    "tps2411pwr.glb",
    "tps2411pwr.step",
    "tps2411pwr.lbr",
    "docs/hero.png",
    "docs/tps2411pwr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "TPS2411PWR",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-14",
    "pin_count": 14,
    "category": "Power Management (PMIC)",
    "subcategory": "Power Distribution Switches",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tps2411.pdf",
    "parts": {
      "symbol": "tps2411pwr.kicad_sym",
      "footprint": "tps2411pwr.kicad_mod",
      "model_3d": "tps2411pwr-etched.glb",
      "model_3d_plain": "tps2411pwr.glb",
      "model_3d_step": "tps2411pwr-etched.step",
      "model_3d_step_plain": "tps2411pwr.step",
      "lbr": "tps2411pwr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2653616"
    },
    "pins": [
      {
        "number": "1",
        "name": "VDD",
        "type": "power_in",
        "description": "Supply voltage input for gate drive charge pump and internal control circuits; must be connected to ≥3V source."
      },
      {
        "number": "2",
        "name": "RSET",
        "type": "input",
        "description": "Resistor connection to ground programs the fast turn-off comparator threshold; leaving open results in slightly positive V(A-C) threshold."
      },
      {
        "number": "3",
        "name": "STAT",
        "type": "bidirectional",
        "description": "Multifunction pin with weak internal pull-up to VDD; outputs high when MOSFET gate is driven high and V(GATE) exceeds V(A) plus 0.4V; pulling low shifts fast turn-off threshold negative by approximately 157mV."
      },
      {
        "number": "4",
        "name": "FLTB",
        "type": "tri_state",
        "description": "Open-drain fault output, active low when VDD is insufficient, GATE should be high but is not, or forward voltage exceeds 0.4V; 3ms deglitch filter on falling edge."
      },
      {
        "number": "5",
        "name": "OV",
        "type": "input",
        "description": "Overvoltage monitor input with 0.6V threshold and 7mV hysteresis; excess voltage contributes to PG output and forces MOSFET off when above threshold."
      },
      {
        "number": "6",
        "name": "UV",
        "type": "input",
        "description": "Undervoltage monitor input with 0.6V threshold and 7mV hysteresis; programmable via external resistor divider and contributes to PG output."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground reference; must have low impedance connection to ground plane."
      },
      {
        "number": "8",
        "name": "GATE",
        "type": "output",
        "description": "Gate drive output for external N-channel MOSFET; driven positive with respect to A by charge pump referenced to BYP, with programmable fast turn-off to ground."
      },
      {
        "number": "9",
        "name": "RSVD",
        "type": "power_in",
        "description": "Reserved pin; must be connected to GND for proper device operation."
      },
      {
        "number": "10",
        "name": "C",
        "type": "input",
        "description": "Voltage sense cathode input for diode emulation; connect to MOSFET drain in typical configuration; protected by internal clamp diode."
      },
      {
        "number": "11",
        "name": "A",
        "type": "input",
        "description": "Voltage sense anode input for diode emulation; serves as reference for charge pump bias supply on BYP; connect to MOSFET source in typical configuration."
      },
      {
        "number": "12",
        "name": "FLTR",
        "type": "input",
        "description": "Filter input for fast comparator; capacitor from FLTR to A filters spurious transients; clamped to C voltage and may be left open for fastest response."
      },
      {
        "number": "13",
        "name": "BYP",
        "type": "bidirectional",
        "description": "Charge pump output and internal bias supply for comparators and gate driver; 2200pF ceramic capacitor from BYP to A required for filtering; must not be shorted below A voltage."
      },
      {
        "number": "14",
        "name": "PG",
        "type": "tri_state",
        "description": "Open-drain power-good indicator output; sinks to ground if UV above threshold, OV below threshold, or internal UVLO not satisfied; multiple PG pins may be wire-ORed."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 37,
        "cost_usd": 0.357,
        "at": "2026-09-23T09:35:09"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tps2411.pdf",
        "pages": 37,
        "sha256": "6edb4f17085af239",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 14,
        "described": 14,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps2411pwr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5.0,
          1.0
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3ee5786aae56190997aa793ba3cfc003fd616782770e29719b4562f012982245",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps2411pwr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5.0,
          1.0
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f0c17398235d6866fca1fe5b30fa5eafa868c0fa6564399025f354148254e647",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}