main
Ray
Publish 0.1.0
e0a0301
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537
{
"slug": "tps23881b1rtqr",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments Ethernet Transceivers, VQFN-56. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"interface",
"tps23881b1rtqr",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"tps23881b1rtqr.kicad_sym",
"tps23881b1rtqr.kicad_mod",
"tps23881b1rtqr.glb",
"tps23881b1rtqr.step",
"tps23881b1rtqr.lbr",
"docs/hero.png",
"docs/tps23881b1rtqr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"tps23881b1rtqr-hero.glb",
"tps23881b1rtqr-hero.overlay.json"
],
"component": {
"mpn": "TPS23881B1RTQR",
"land_source": "kicad",
"land_note": "TI TPS23881B p.143 PACKAGE OUTLINE RTQ0056E (4224191/A 03/2018): VQFN-56, body 7.85-8.15 square, pitch 0.5 (52X), exposed thermal pad 5.7 +/-0.1 (pad 57), height 0.8-1.0. p.144 EXAMPLE BOARD LAYOUT: pads (0.6) x (0.24), land extent (7.8), thermal pad (5.7). The page had QFN-56 7x7 P0.4 (wrong package). KiCad QFN-56-1EP_8x8mm_P0.5mm_EP5.6x5.6mm (descr from a TI RTQ sheet): same body and pitch, pads 0.875 x 0.25 (longer than TI's 0.6 example, extending outward), EP 5.6 (TI 5.7): the nearest KiCad land; EP 5.9 would exceed TI's pad.",
"manufacturer": "Texas Instruments",
"package": "VQFN-56",
"pin_count": 57,
"category": "Interface",
"subcategory": "Ethernet Transceivers",
"datasheet": "https://www.ti.com/lit/ds/symlink/tps23881b.pdf",
"parts": {
"symbol": "tps23881b1rtqr.kicad_sym",
"footprint": "tps23881b1rtqr.kicad_mod",
"model_3d": "tps23881b1rtqr-hero.glb",
"model_3d_plain": "tps23881b1rtqr.glb",
"model_3d_step": "tps23881b1rtqr-etched.step",
"model_3d_step_plain": "tps23881b1rtqr.step",
"lbr": "tps23881b1rtqr.lbr"
},
"distributor_links": {
"lcsc": "C31283732",
"digikey": "296-TPS23881B1RTQRCT-ND",
"mouser": "595-TPS23881B1RTQR"
},
"distributor_check": {
"checked_at": "2026-11-17T17:17:32Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-TPS23881B1RTQRCT-ND",
"status": "found"
},
"mouser": {
"pn": "595-TPS23881B1RTQR",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "GAT1",
"type": "output",
"description": "Channel 1 gate drive output for the external N-channel MOSFET; leave floating if unused and keep leakage to adjacent pins below 250nA."
},
{
"number": "2",
"name": "SEN1",
"type": "input",
"description": "Channel 1 current sense input measured against KSENSA across a 0.200Ω sense resistor; tie to GND if the port is unused."
},
{
"number": "3",
"name": "DRAIN1",
"type": "input",
"description": "Channel 1 output voltage monitor and detection sense pin; can be left floating or tied to GND if the port is unused."
},
{
"number": "4",
"name": "KSENSA",
"type": "input",
"description": "Kelvin point connection for the differential current measurement of SEN1 and SEN2."
},
{
"number": "5",
"name": "DRAIN2",
"type": "input",
"description": "Channel 2 output voltage monitor and detection sense pin; can be left floating or tied to GND if the port is unused."
},
{
"number": "6",
"name": "SEN2",
"type": "input",
"description": "Channel 2 current sense input measured against KSENSA across a 0.200Ω sense resistor; tie to GND if the port is unused."
},
{
"number": "7",
"name": "GAT2",
"type": "output",
"description": "Channel 2 gate drive output for the external N-channel MOSFET; leave floating if unused and keep leakage to adjacent pins below 250nA."
},
{
"number": "8",
"name": "GAT3",
"type": "output",
"description": "Channel 3 gate drive output for the external N-channel MOSFET; leave floating if unused and keep leakage to adjacent pins below 250nA."
},
{
"number": "9",
"name": "SEN3",
"type": "input",
"description": "Channel 3 current sense input measured against KSENSB across a 0.200Ω sense resistor; tie to GND if the port is unused."
},
{
"number": "10",
"name": "DRAIN3",
"type": "input",
"description": "Channel 3 output voltage monitor and detection sense pin; can be left floating or tied to GND if the port is unused."
},
{
"number": "11",
"name": "KSENSB",
"type": "input",
"description": "Kelvin point connection for the differential current measurement of SEN3 and SEN4."
},
{
"number": "12",
"name": "DRAIN4",
"type": "input",
"description": "Channel 4 output voltage monitor and detection sense pin; can be left floating or tied to GND if the port is unused."
},
{
"number": "13",
"name": "SEN4",
"type": "input",
"description": "Channel 4 current sense input measured against KSENSB across a 0.200Ω sense resistor; tie to GND if the port is unused."
},
{
"number": "14",
"name": "GAT4",
"type": "output",
"description": "Channel 4 gate drive output for the external N-channel MOSFET; leave floating if unused and keep leakage to adjacent pins below 250nA."
},
{
"number": "15",
"name": "NC",
"type": "unconnected",
"description": "No connect pin internally biased at 1/3 and 2/3 of VPWR to control the voltage gradient from VPWR; leave open."
},
{
"number": "16",
"name": "NC",
"type": "unconnected",
"description": "No connect pin internally biased at 1/3 and 2/3 of VPWR to control the voltage gradient from VPWR; leave open."
},
{
"number": "17",
"name": "VPWR",
"type": "power_in",
"description": "Analog 54V positive supply input (recommended 44V to 57V), bypassed with 0.1µF to AGND."
},
{
"number": "18",
"name": "NC",
"type": "unconnected",
"description": "No connect pin internally biased at 1/3 and 2/3 of VPWR to control the voltage gradient from VPWR; leave open."
},
{
"number": "19",
"name": "NC",
"type": "unconnected",
"description": "No connect pin internally biased at 1/3 and 2/3 of VPWR to control the voltage gradient from VPWR; leave open."
},
{
"number": "20",
"name": "TEST4",
"type": "unconnected",
"description": "Used internally for test purposes only; leave open."
},
{
"number": "21",
"name": "AGND",
"type": "power_in",
"description": "Analog ground, connected to the GND plane and the exposed thermal pad and not connected internally to DGND."
},
{
"number": "22",
"name": "NC",
"type": "unconnected",
"description": "No connect pin; leave open."
},
{
"number": "23",
"name": "TEST1",
"type": "unconnected",
"description": "Used internally for test purposes only; leave open."
},
{
"number": "24",
"name": "TEST2",
"type": "unconnected",
"description": "Used internally for test purposes only; leave open."
},
{
"number": "25",
"name": "TEST3",
"type": "unconnected",
"description": "Used internally for test purposes only; leave open."
},
{
"number": "26",
"name": "TEST0",
"type": "unconnected",
"description": "Used internally for test purposes only; leave open."
},
{
"number": "27",
"name": "NC",
"type": "unconnected",
"description": "No connect pin; leave open."
},
{
"number": "28",
"name": "NC",
"type": "unconnected",
"description": "No connect pin; leave open."
},
{
"number": "29",
"name": "GAT5",
"type": "output",
"description": "Channel 5 gate drive output for the external N-channel MOSFET; leave floating if unused and keep leakage to adjacent pins below 250nA."
},
{
"number": "30",
"name": "SEN5",
"type": "input",
"description": "Channel 5 current sense input measured against KSENSC across a 0.200Ω sense resistor; tie to GND if the port is unused."
},
{
"number": "31",
"name": "DRAIN5",
"type": "input",
"description": "Channel 5 output voltage monitor and detection sense pin; can be left floating or tied to GND if the port is unused."
},
{
"number": "32",
"name": "KSENSC",
"type": "input",
"description": "Kelvin point connection for the differential current measurement of SEN5 and SEN6."
},
{
"number": "33",
"name": "DRAIN6",
"type": "input",
"description": "Channel 6 output voltage monitor and detection sense pin; can be left floating or tied to GND if the port is unused."
},
{
"number": "34",
"name": "SEN6",
"type": "input",
"description": "Channel 6 current sense input measured against KSENSC across a 0.200Ω sense resistor; tie to GND if the port is unused."
},
{
"number": "35",
"name": "GAT6",
"type": "output",
"description": "Channel 6 gate drive output for the external N-channel MOSFET; leave floating if unused and keep leakage to adjacent pins below 250nA."
},
{
"number": "36",
"name": "GAT7",
"type": "output",
"description": "Channel 7 gate drive output for the external N-channel MOSFET; leave floating if unused and keep leakage to adjacent pins below 250nA."
},
{
"number": "37",
"name": "SEN7",
"type": "input",
"description": "Channel 7 current sense input measured against KSENSD across a 0.200Ω sense resistor; tie to GND if the port is unused."
},
{
"number": "38",
"name": "DRAIN7",
"type": "input",
"description": "Channel 7 output voltage monitor and detection sense pin; can be left floating or tied to GND if the port is unused."
},
{
"number": "39",
"name": "KSENSD",
"type": "input",
"description": "Kelvin point connection for the differential current measurement of SEN7 and SEN8."
},
{
"number": "40",
"name": "DRAIN8",
"type": "input",
"description": "Channel 8 output voltage monitor and detection sense pin; can be left floating or tied to GND if the port is unused."
},
{
"number": "41",
"name": "SEN8",
"type": "input",
"description": "Channel 8 current sense input measured against KSENSD across a 0.200Ω sense resistor; tie to GND if the port is unused."
},
{
"number": "42",
"name": "GAT8",
"type": "output",
"description": "Channel 8 gate drive output for the external N-channel MOSFET; leave floating if unused and keep leakage to adjacent pins below 250nA."
},
{
"number": "43",
"name": "VDD",
"type": "power_in",
"description": "3.3V digital logic supply input (recommended 3V to 3.6V), bypassed with 0.1µF to DGND."
},
{
"number": "44",
"name": "RESET",
"type": "input",
"description": "Active-low reset input that turns off all ports and returns registers to power-up state, internally pulled up to VDD with a 1µs to 5µs deglitch filter."
},
{
"number": "45",
"name": "INT",
"type": "output",
"description": "Open-drain interrupt output that asserts low when a bit in the interrupt register is asserted."
},
{
"number": "46",
"name": "DGND",
"type": "power_in",
"description": "Digital ground, connected to the GND plane and the exposed thermal pad and not connected internally to AGND."
},
{
"number": "47",
"name": "TEST5",
"type": "unconnected",
"description": "Used internally for test purposes only; leave open."
},
{
"number": "48",
"name": "A1",
"type": "input",
"description": "I2C address line A1, internally pulled up to VDD."
},
{
"number": "49",
"name": "A2",
"type": "input",
"description": "I2C address line A2, internally pulled up to VDD."
},
{
"number": "50",
"name": "A3",
"type": "input",
"description": "I2C address line A3, internally pulled up to VDD."
},
{
"number": "51",
"name": "A4",
"type": "input",
"description": "I2C address line A4, internally pulled up to VDD."
},
{
"number": "52",
"name": "AUTO",
"type": "bidirectional",
"description": "Autonomous mode selection pin: floating disables autonomous operation, while a resistor RAUTO to GND (with a 10nF capacitor to GND) enables it at selectable port power levels."
},
{
"number": "53",
"name": "SCL",
"type": "input",
"description": "Serial clock input for the I2C bus (up to 400kHz)."
},
{
"number": "54",
"name": "SDAI",
"type": "input",
"description": "Serial data input for the I2C bus, which can be tied to SDAO for non-isolated systems or systems with bidirectional I2C isolators."
},
{
"number": "55",
"name": "SDAO",
"type": "output",
"description": "Open-drain I2C serial data output requiring an external pullup, which can be tied to SDAI for non-isolated systems or bidirectional isolators."
},
{
"number": "56",
"name": "OSS",
"type": "input",
"description": "Active-high Channel 1-8 fast shutdown input, internally pulled down to DGND with a 1µs to 5µs deglitch filter."
},
{
"number": "57",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Table 5-1 lists pin 52 under both NC (22, 27, 28, 52) and AUTO. Pin 52 is assigned to AUTO here beca; Table 5-1 gives only pin-number groups for GAT1-8, DRAIN1-8, SEN1-8, KSENS and TEST0-5. The per-chan; The Figure 5-1 pin map text is scrambled in extraction, so pin positions were taken from Table 5-1 o"
],
"pages_sent": 11,
"cost_usd": 0.0974,
"at": "2026-11-17T17:17:09"
},
"datasheet": {
"url": "https://www.ti.com/lit/ds/symlink/tps23881b.pdf",
"pages": 146,
"sha256": "50c3217710efa886",
"source_tier": "mfr"
},
"cad": "land: KiCad official (CC-BY-SA 4.0); 3D: generated from the datasheet",
"model_3d_generated": {
"generator": "factory/gen_pkg3d.py",
"family": "QFN",
"height_mm": 0.9,
"height_basis": "datasheet A, midpoint of min and max",
"standoff_mm": 0.0
},
"pins": {
"total": 57,
"described": 57,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "tps23881b1rtqr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
8.02,
8.02,
0.9
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "70d6e132af1fe89ae553daac01651bce00d4ef3655c53d7405f14a74e01a1fde",
"checked": "2026-11-17",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "tps23881b1rtqr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
8.02,
8.02,
0.9
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "196d74f93ce20427715102692fff60a3113f649220fcd9e25ee4ace107d7cc00",
"checked": "2026-11-17",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "RTQ",
"source_page": 143,
"D": {
"nom_mm": 8.0,
"range_mm": [
7.85,
8.15
]
},
"E1": {
"nom_mm": 8.0,
"range_mm": [
7.85,
8.15
]
},
"e": {
"nom_mm": 0.5,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 0.9,
"range_mm": [
0.8,
1.0
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "tps23881b1rtqr.step",
"verdict": "PASS",
"reasons": [
"height within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}