main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tps23881b1rtqr: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tps23881b1rtqr-etched.glb tps23881b1rtqr: factory component page (tier=mfr) · Ray
tps23881b1rtqr-etched.step tps23881b1rtqr: factory component page (tier=mfr) · Ray
tps23881b1rtqr-hero.glb tps23881b1rtqr: hero GLB from the etched model (keeps the MPN mark) · Ray
tps23881b1rtqr-hero.overlay.json tps23881b1rtqr: hero GLB from the etched model (keeps the MPN mark) · Ray
tps23881b1rtqr.glb Publish 0.1.0 · Ray
tps23881b1rtqr.kicad_mod Publish 0.1.0 · Ray
tps23881b1rtqr.kicad_sym Publish 0.1.0 · Ray
tps23881b1rtqr.lbr Publish 0.1.0 · Ray
tps23881b1rtqr.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 57 pins · Ray

TPS23881B1RTQR

Texas Instruments · Ethernet Transceivers · VQFN-56

TPS23881B1RTQR from Texas Instruments, in a VQFN-56. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 GAT1 output Channel 1 gate drive output for the external N-channel MOSFET; leave floating if unused and keep leakage to adjacent pins below 250nA.
2 SEN1 input Channel 1 current sense input measured against KSENSA across a 0.200Ω sense resistor; tie to GND if the port is unused.
3 DRAIN1 input Channel 1 output voltage monitor and detection sense pin; can be left floating or tied to GND if the port is unused.
4 KSENSA input Kelvin point connection for the differential current measurement of SEN1 and SEN2.
5 DRAIN2 input Channel 2 output voltage monitor and detection sense pin; can be left floating or tied to GND if the port is unused.
6 SEN2 input Channel 2 current sense input measured against KSENSA across a 0.200Ω sense resistor; tie to GND if the port is unused.
7 GAT2 output Channel 2 gate drive output for the external N-channel MOSFET; leave floating if unused and keep leakage to adjacent pins below 250nA.
8 GAT3 output Channel 3 gate drive output for the external N-channel MOSFET; leave floating if unused and keep leakage to adjacent pins below 250nA.
9 SEN3 input Channel 3 current sense input measured against KSENSB across a 0.200Ω sense resistor; tie to GND if the port is unused.
10 DRAIN3 input Channel 3 output voltage monitor and detection sense pin; can be left floating or tied to GND if the port is unused.
11 KSENSB input Kelvin point connection for the differential current measurement of SEN3 and SEN4.
12 DRAIN4 input Channel 4 output voltage monitor and detection sense pin; can be left floating or tied to GND if the port is unused.
13 SEN4 input Channel 4 current sense input measured against KSENSB across a 0.200Ω sense resistor; tie to GND if the port is unused.
14 GAT4 output Channel 4 gate drive output for the external N-channel MOSFET; leave floating if unused and keep leakage to adjacent pins below 250nA.
15 NC unconnected No connect pin internally biased at 1/3 and 2/3 of VPWR to control the voltage gradient from VPWR; leave open.
16 NC unconnected No connect pin internally biased at 1/3 and 2/3 of VPWR to control the voltage gradient from VPWR; leave open.
17 VPWR power_in Analog 54V positive supply input (recommended 44V to 57V), bypassed with 0.1µF to AGND.
18 NC unconnected No connect pin internally biased at 1/3 and 2/3 of VPWR to control the voltage gradient from VPWR; leave open.
19 NC unconnected No connect pin internally biased at 1/3 and 2/3 of VPWR to control the voltage gradient from VPWR; leave open.
20 TEST4 unconnected Used internally for test purposes only; leave open.
21 AGND power_in Analog ground, connected to the GND plane and the exposed thermal pad and not connected internally to DGND.
22 NC unconnected No connect pin; leave open.
23 TEST1 unconnected Used internally for test purposes only; leave open.
24 TEST2 unconnected Used internally for test purposes only; leave open.
25 TEST3 unconnected Used internally for test purposes only; leave open.
26 TEST0 unconnected Used internally for test purposes only; leave open.
27 NC unconnected No connect pin; leave open.
28 NC unconnected No connect pin; leave open.
29 GAT5 output Channel 5 gate drive output for the external N-channel MOSFET; leave floating if unused and keep leakage to adjacent pins below 250nA.
30 SEN5 input Channel 5 current sense input measured against KSENSC across a 0.200Ω sense resistor; tie to GND if the port is unused.
31 DRAIN5 input Channel 5 output voltage monitor and detection sense pin; can be left floating or tied to GND if the port is unused.
32 KSENSC input Kelvin point connection for the differential current measurement of SEN5 and SEN6.
33 DRAIN6 input Channel 6 output voltage monitor and detection sense pin; can be left floating or tied to GND if the port is unused.
34 SEN6 input Channel 6 current sense input measured against KSENSC across a 0.200Ω sense resistor; tie to GND if the port is unused.
35 GAT6 output Channel 6 gate drive output for the external N-channel MOSFET; leave floating if unused and keep leakage to adjacent pins below 250nA.
36 GAT7 output Channel 7 gate drive output for the external N-channel MOSFET; leave floating if unused and keep leakage to adjacent pins below 250nA.
37 SEN7 input Channel 7 current sense input measured against KSENSD across a 0.200Ω sense resistor; tie to GND if the port is unused.
38 DRAIN7 input Channel 7 output voltage monitor and detection sense pin; can be left floating or tied to GND if the port is unused.
39 KSENSD input Kelvin point connection for the differential current measurement of SEN7 and SEN8.
40 DRAIN8 input Channel 8 output voltage monitor and detection sense pin; can be left floating or tied to GND if the port is unused.
41 SEN8 input Channel 8 current sense input measured against KSENSD across a 0.200Ω sense resistor; tie to GND if the port is unused.
42 GAT8 output Channel 8 gate drive output for the external N-channel MOSFET; leave floating if unused and keep leakage to adjacent pins below 250nA.
43 VDD power_in 3.3V digital logic supply input (recommended 3V to 3.6V), bypassed with 0.1µF to DGND.
44 RESET input Active-low reset input that turns off all ports and returns registers to power-up state, internally pulled up to VDD with a 1µs to 5µs deglitch filter.
45 INT output Open-drain interrupt output that asserts low when a bit in the interrupt register is asserted.
46 DGND power_in Digital ground, connected to the GND plane and the exposed thermal pad and not connected internally to AGND.
47 TEST5 unconnected Used internally for test purposes only; leave open.
48 A1 input I2C address line A1, internally pulled up to VDD.
49 A2 input I2C address line A2, internally pulled up to VDD.
50 A3 input I2C address line A3, internally pulled up to VDD.
51 A4 input I2C address line A4, internally pulled up to VDD.
52 AUTO bidirectional Autonomous mode selection pin: floating disables autonomous operation, while a resistor RAUTO to GND (with a 10nF capacitor to GND) enables it at selectable port power levels.
53 SCL input Serial clock input for the I2C bus (up to 400kHz).
54 SDAI input Serial data input for the I2C bus, which can be tied to SDAO for non-isolated systems or systems with bidirectional I2C isolators.
55 SDAO output Open-drain I2C serial data output requiring an external pullup, which can be tied to SDAI for non-isolated systems or bidirectional isolators.
56 OSS input Active-high Channel 1-8 fast shutdown input, internally pulled down to DGND with a 1µs to 5µs deglitch filter.
57 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-56
Category Interface
Pins 57

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Voltage VPWR -0.3 70 V 7
Voltage VDD -0.3 4 V 7
Voltage OSS, RESET, A1-A4, SDAI, SDAO, SCL, INT -0.3 4 V 7
Voltage SEN1-8, KSENSA, KSENSB, KSENSC, KSENSD -0.3 3 V 7
Voltage GATE1-8 -0.3 13 V 7
Voltage DRAIN1-8 -0.3 70 V 7
Voltage TEST0-3, ATST_DCPL0, DTST_DCPL1 -0.3 4 V 7
Voltage AGND - DGND -0.3 0.3 V 7
Sink current INT, SDA 20 mA 7
Lead temperature 260 °C 1/6mm from case for 10 seconds 7
Storage temperature Tstg -65 150 °C 7
VDD supply voltage VVDD 3 3.3 3.6 V 7
VPWR supply voltage VVPWR 44 54 57 V 7
Voltage slew rate on VPWR 1 V/µs 7
I2C clock frequency fSCL 400 kHz 7
Junction temperature TJ -40 125 °C 7
UVLO falling threshold VPWR VUVLOPW_F 14.5 17.5 V Check internal oscillator stops operating 8
UVLO rising threshold VPWR VUVLOPW_R 15.5 18.5 V 8
Undervoltage falling threshold VPWR VPUV_F 25 26.5 28 V VPUV threshold 8
UVLO falling threshold VDD VUVDD_F 2.1 2.25 2.4 V For channel deassertion 8
UVLO rising threshold VDD VUVDD_R 2.45 2.6 2.75 V 8
UVLO warning threshold VDD VUVW_F 2.6 2.8 3 V VDD falling 8
Conversion time (current) TCONV_I 0.64 0.8 0.96 ms All ranges, each channel 8
Conversion time (voltage) TCONV_V 0.82 1.03 1.2 ms All ranges, each channel 8
Integration time, current TINT_CUR 82 102 122 ms Each channel, channel ON current 8
Integration time, detection TINT_DET 13.1 16.6 20 ms 8
Power-good threshold VPGT 1 2.13 3 V Measured at VDRAINn 9
Shorted FET threshold VSHT 4 6 8 V Measured at VDRAINn 9
Resistance from DRAINn to VPWR RDRAIN 80 100 190 kΩ Any operating mode except during detection or while the Channel is ON, including in device RESET state 9
Gate sinking current with power-on reset, OSS detected or channel turnoff IGO- 60 100 190 mA VGATEn = 5V 9
Gate sourcing current IGO+ 39 50 63 µA VGATEn = 0V, default selection 9
Gate turnoff time from 1-bit OSS input tD_off_OSS 1 5 µs From OSS to VGATEn < 1 V, VSENn = 0V, MbitPrty = 0 9
Gate turnoff time from 3-bit OSS input tOSS_OFF 72 104 µs From Start bit falling edge to VGATEn < 1V, VSENn = 0V, MbitPrty = 1 9
Digital input high VIH 2.1 V 13
Digital input low VIL 0.9 V 13
Digital output low SDAO VOL 0.4 V SDAO at 9mA 13
Pullup resistor to VDD Rpullup 30 50 80 kΩ /RESET, A1-A4, TEST0 13
Fault to /INT assertion tFLT_INT 50 500 µs Time to internally register an Interrupt fault, from Channel turn off 13
I2C watchdog trip delay tWDT_I2C 1.1 2.2 3.3 s 14
Detection duration time tDET 275 350 425 ms Time to complete a detection, 4Pxx = 0 10
Open circuit detection voltage Vdet_open 23.5 26 29 V Measured as VVPWR - VDRAINn 10
Accepted resistance range RACCEPT 19 25 26.5 kΩ 10
Classification voltage VCLASS 15.5 18.5 20.5 V VVPWR - VDRAINn, VSENn ≥ 0mV, Ichannel ≥ 180 µA 10
Mark voltage VMARK 7 10 V VVPWR - VDRAINn, 4 mA ≥ IChannel ≥ 180 µA 10
PCUT tolerance POL ≤ 15W δPCUT/PCUT 0 5 10 % POL ≤ 15W 11
Discovery-to-channel input voltage limit VIMIN (DCDTxx=0) VIMIN 0.8 1.3 1.8 mV DCDTxx = 0 11
ISHORT threshold in 1X mode and during inrush Vshort 205 245 mV 12
ISHORT threshold in 2X mode Vshort2X 280 320 mV 12
Thermal shutdown temperature 135 146 °C Temperature rising 12
Junction-to-ambient thermal resistance RθJA 25.3 °C/W RTQ Package (VQFN), 56 pins 7
Junction-to-case (top) thermal resistance RθJC(top) 9.7 °C/W RTQ Package (VQFN), 56 pins 7
Junction-to-board thermal resistance RθJB 3.7 °C/W RTQ Package (VQFN), 56 pins 7
Junction-to-top characterization parameter ΨJT 0.2 °C/W RTQ Package (VQFN), 56 pins 7
Junction-to-board characterization parameter ΨJB 3.7 °C/W RTQ Package (VQFN), 56 pins 7
Junction-to-case (bottom) thermal resistance RθJC(bot) 0.5 °C/W RTQ Package (VQFN), 56 pins 8

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TPS23881B1RTQR
  • Footprint: Package_DFN_QFN:QFN-56-1EP_8x8mm_P0.5mm_EP5.6x5.6mm
  • 3D model: VQFN-56, generated on the KiCad land (body 8 x 8 mm, terminals on the pads, 0.9 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tps23881b1rtqr-etched.step / tps23881b1rtqr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps23881b1rtqr.step / tps23881b1rtqr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (146 pp, sha256 50c3217710efa886, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated). Land: TI TPS23881B p.143 PACKAGE OUTLINE RTQ0056E (4224191/A 03/2018): VQFN-56, body 7.85-8.15 square, pitch 0.5 (52X), exposed thermal pad 5.7 +/-0.1 (pad 57), height 0.8-1.0. p.144 EXAMPLE BOARD LAYOUT: pads (0.6) x (0.24), land extent (7.8), thermal pad (5.7). The page had QFN-56 7x7 P0.4 (wrong package). KiCad QFN-56-1EP_8x8mm_P0.5mm_EP5.6x5.6mm (descr from a TI RTQ sheet): same body and pitch, pads 0.875 x 0.25 (longer than TI's 0.6 example, extending outward), EP 5.6 (TI 5.7): the nearest KiCad land; EP 5.9 would exceed TI's pad..

Datasheet PDF