TPS2375D

{
  "slug": "tps2375d",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Power Over Ethernet (PoE) Controllers, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps2375d",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps2375d.kicad_sym",
    "tps2375d.kicad_mod",
    "tps2375d.glb",
    "tps2375d.step",
    "tps2375d.lbr",
    "docs/hero.png",
    "docs/tps2375d-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps2375d-hero.glb",
    "tps2375d-hero.overlay.json"
  ],
  "component": {
    "mpn": "TPS2375D",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "Power Over Ethernet (PoE) Controllers",
    "datasheet": "https://www.ti.com/cn/lit/ds/symlink/tps2377.pdf",
    "parts": {
      "symbol": "tps2375d.kicad_sym",
      "footprint": "tps2375d.kicad_mod",
      "model_3d": "tps2375d-hero.glb",
      "model_3d_plain": "tps2375d.glb",
      "model_3d_step": "tps2375d-etched.step",
      "model_3d_step_plain": "tps2375d.step",
      "lbr": "tps2375d.lbr"
    },
    "distributor_links": {
      "lcsc": "C2872890",
      "digikey": "296-17061-ND",
      "mouser": "595-TPS2375D"
    },
    "distributor_check": {
      "checked_at": "2026-10-09T14:23:51Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-17061-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS2375D",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "ILIM",
        "type": "output",
        "description": "Connect a resistor from ILIM to VSS to set the start-up inrush current limit, with R(ILIM) practically limited to 62.5 kΩ to 500 kΩ (178 kΩ recommended for legacy PSE compatibility), and the pin must not be left open or shorted to VSS."
      },
      {
        "number": "2",
        "name": "CLASS",
        "type": "output",
        "description": "Connect an external classification resistor from CLASS to VSS per Table 1 (255 Ω to 4420 Ω), drawing current only when VDD is between 13 V and 21 V, and the CLASS pin must not be shorted to ground."
      },
      {
        "number": "3",
        "name": "DET",
        "type": "output",
        "description": "Connect a 24.9-kΩ ±1% detection resistor from DET to VDD for valid PD detection, which is connected across the line only when V(VDD) is between 1.4 V and 11.3 V."
      },
      {
        "number": "4",
        "name": "VSS",
        "type": "power_in",
        "description": "Input supply negative rail and local ground for the TPS2375, serving as the return line from the PSE; per the layout notes, pin 4 has the lowest thermal resistance to the die."
      },
      {
        "number": "5",
        "name": "RTN",
        "type": "output",
        "description": "Switched negative power rail (output-side return) used as the low-side reference for the load, with recommended operating voltage 0 to 57 V, sinking current 0 to 350 mA, and absolute maximum SOA limited to V(RTN) = 80 V and I(RTN) = 515 mA."
      },
      {
        "number": "6",
        "name": "PG",
        "type": "output",
        "description": "Open-drain, active-high power-good output that goes high-impedance when the pass MOSFET is on and not in inrush limiting, requires a pullup resistor or other interface, and is rated for 0 to 2 mA sinking current with at least 4 V between VDD and RTN."
      },
      {
        "number": "7",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection on the TPS2375 (this pin is the UVLO input only on the TPS2376 and is not connected internally on the TPS2375)."
      },
      {
        "number": "8",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive input supply from the rectified PSE line, with recommended input voltage range 0 to 57 V, and absolute maximum of 100 V referenced to VSS."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin 7 is listed as NC for TPS2375/TPS2377 and UVLO for TPS2376 in the Terminal Functions table on pa; Pin types follow the I/O column of the datasheet terminal table (O). ILIM, CLASS and DET are resisto; The package is SOIC-8 (D), which the datasheet lists as TPS2375D on page 2 and as SOIC (D), 8 pins o"
        ],
        "pages_sent": 10,
        "cost_usd": 0.0655,
        "at": "2026-10-09T14:23:38"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/ds/symlink/tps2377.pdf",
        "pages": 28,
        "sha256": "6559d81e1161e551",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps2375d.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-09",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps2375d-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "42358250513471367419e93fb2e3183b1fec7be103e4574db89e8654aaf35e27",
        "checked": "2026-10-09",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}