component

TPS2151IPWP

Public Made by Adom

by adom

Texas Instruments Power Distribution Switches, HTSSOP-14-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentpower supply chiptps2151ipwpfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray 1d ago
viewers tps2151ipwp: viewers · Ray 1d ago
package.json Publish 0.1.0 · Ray 1d ago
page.json Set visibility: public · Ray 1d ago
README.md Initial commit: component/tps2151ipwp · Ray 1d ago
tps2151ipwp-etched.glb tps2151ipwp: factory component page (tier=lcsc) · Ray 1d ago
tps2151ipwp-etched.step tps2151ipwp: factory component page (tier=lcsc) · Ray 1d ago
tps2151ipwp-hero.glb tps2151ipwp: hero GLB from the etched model (keeps the MPN mark) · Ray 46m ago
tps2151ipwp-hero.overlay.json Publish 0.1.0 · Ray 1d ago
tps2151ipwp.glb Publish 0.1.0 · Ray 1d ago
tps2151ipwp.kicad_mod Publish 0.1.0 · Ray 1d ago
tps2151ipwp.kicad_sym Publish 0.1.0 · Ray 1d ago
tps2151ipwp.lbr Publish 0.1.0 · Ray 1d ago
tps2151ipwp.step Publish 0.1.0 · Ray 1d ago

TPS2151IPWP

Texas Instruments · Power Distribution Switches · HTSSOP-14-EP

TPS2151IPWP from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW_PG output Active-high power-good output for the switch, a CMOS logic-level signal with no external pullup required that is pulled low when SW_OUT falls below 88% of 5 V for the TPS2151.
2 SW_IN power_in Input of the integrated N-channel high-side power switch, which has a maximum on-state resistance of 65 mΩ and is rated for 500 mA continuous current.
3 SW_IN power_in Input of the integrated N-channel high-side power switch (second SW_IN pin, internally tied to pin 2), which has a maximum on-state resistance of 65 mΩ and is rated for 500 mA continuous current.
4 LDO_IN power_in Input of the internal adjustable LDO, which supports 2.7 V to 5.5 V VIN, has a 0.5 V maximum dropout and is rated for 250 mA continuous current.
5 SW_EN input Active-high enable for the switch on the TPS2151, with an internal pulldown (this pin is active low on the TPS2140/41).
6 LDO_EN input Active-high enable signal for the LDO regulator, with no internal pullup or pulldown.
7 GND power_in Ground reference for the device.
8 LDO_PG output Open-drain, active-high power-good signal for the LDO output.
9 ADJ input Feedback adjustment input of the LDO regulator used to set the output voltage over the 0.9 V to 3.3 V adjustable range.
10 LDO_PLDN input Output pulldown pin for the LDO, used when connected to LDO_OUT to discharge the output.
11 LDO_OUT power_out Output of the adjustable LDO regulator, which is rated for 250 mA continuous current.
12 SW_OUT power_out Output of the internal power-distribution switch, which applies dual current limiting during turn-on and overload.
13 SW_OUT power_out Output of the internal power-distribution switch (second SW_OUT pin, internally tied to pin 12), which applies dual current limiting during turn-on and overload.
14 SW_PLDN output Open-drain discharge pin for the switch that is open when the switch is on and pulled to ground otherwise; connecting it to SW_OUT reduces the output fall time.
15 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HTSSOP-14-EP
Category Power Supply Chip
Pins 15

CAD (KiCad official)

  • Symbol: TPS2151IPWP
  • Footprint: Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm
  • 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)
  • 3D model files: tps2151ipwp-etched.step / tps2151ipwp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps2151ipwp.step / tps2151ipwp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (33 pp, sha256 8316b929dcdd03f1, retrieved 2026-10-07, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF