main
Ray Publish 0.1.0 1d35b8f
{
  "slug": "tpic2810d",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments LED Drivers, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "led drivers",
    "tpic2810d",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tpic2810d.kicad_sym",
    "tpic2810d.kicad_mod",
    "tpic2810d.glb",
    "tpic2810d.step",
    "tpic2810d.lbr",
    "docs/hero.png",
    "docs/tpic2810d-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tpic2810d-hero.glb",
    "tpic2810d-hero.overlay.json",
    "tpic2810d-etched.glb"
  ],
  "component": {
    "mpn": "TPIC2810D",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-16",
    "pin_count": 16,
    "category": "LED Drivers",
    "subcategory": "LED Drivers",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tpic2810.pdf",
    "parts": {
      "symbol": "tpic2810d.kicad_sym",
      "footprint": "tpic2810d.kicad_mod",
      "model_3d": "tpic2810d-hero.glb",
      "model_3d_plain": "tpic2810d-etched.glb",
      "model_3d_step": "tpic2810d-etched.step",
      "model_3d_step_plain": "tpic2810d.step",
      "lbr": "tpic2810d.lbr"
    },
    "distributor_links": {
      "lcsc": "C1554396",
      "mouser": "595-TPIC2810D"
    },
    "distributor_check": {
      "checked_at": "2026-11-10T09:37:46Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "deferred",
        "error": "shared DigiKey quota guard: 905 calls left today"
      },
      "mouser": {
        "pn": "595-TPIC2810D",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VCC",
        "type": "power_in",
        "description": "Logic supply voltage input, recommended range 3.0 V to 5.5 V and absolute maximum 7 V with respect to GND."
      },
      {
        "number": "2",
        "name": "SDA",
        "type": "bidirectional",
        "description": "Open-drain bidirectional I2C serial data terminal that requires an external pullup resistor."
      },
      {
        "number": "3",
        "name": "DRAIN0",
        "type": "output",
        "description": "Low-side power DMOS FET drain output for resistive loads, rated 40 V drain-to-source and 100 mA continuous sink current."
      },
      {
        "number": "4",
        "name": "DRAIN1",
        "type": "output",
        "description": "Low-side power DMOS FET drain output for resistive loads, rated 40 V drain-to-source and 100 mA continuous sink current."
      },
      {
        "number": "5",
        "name": "DRAIN2",
        "type": "output",
        "description": "Low-side power DMOS FET drain output for resistive loads, rated 40 V drain-to-source and 100 mA continuous sink current."
      },
      {
        "number": "6",
        "name": "DRAIN3",
        "type": "output",
        "description": "Low-side power DMOS FET drain output for resistive loads, rated 40 V drain-to-source and 100 mA continuous sink current."
      },
      {
        "number": "7",
        "name": "A2",
        "type": "input",
        "description": "Address input 2 that sets the device's I2C slave address bit A2."
      },
      {
        "number": "8",
        "name": "G",
        "type": "input",
        "description": "Active-low output enable; driving G high turns all drain outputs off, and driving it low makes the output storage register transparent to the outputs."
      },
      {
        "number": "9",
        "name": "A0",
        "type": "input",
        "description": "Address input 0 that sets the device's I2C slave address bit A0."
      },
      {
        "number": "10",
        "name": "A1",
        "type": "input",
        "description": "Address input 1 that sets the device's I2C slave address bit A1."
      },
      {
        "number": "11",
        "name": "DRAIN4",
        "type": "output",
        "description": "Low-side power DMOS FET drain output for resistive loads, rated 40 V drain-to-source and 100 mA continuous sink current."
      },
      {
        "number": "12",
        "name": "DRAIN5",
        "type": "output",
        "description": "Low-side power DMOS FET drain output for resistive loads, rated 40 V drain-to-source and 100 mA continuous sink current."
      },
      {
        "number": "13",
        "name": "DRAIN6",
        "type": "output",
        "description": "Low-side power DMOS FET drain output for resistive loads, rated 40 V drain-to-source and 100 mA continuous sink current."
      },
      {
        "number": "14",
        "name": "DRAIN7",
        "type": "output",
        "description": "Low-side power DMOS FET drain output for resistive loads, rated 40 V drain-to-source and 100 mA continuous sink current."
      },
      {
        "number": "15",
        "name": "SCL",
        "type": "input",
        "description": "I2C serial clock input, specified for 100 kHz, 400 kHz and 2 MHz operation."
      },
      {
        "number": "16",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference; all device voltages are specified with respect to GND."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The Terminal Functions table lists GND (pin 16) with I/O type 'O'; per the ERC convention in the ins; Drain outputs are open-drain low-side DMOS switches; recorded as 'output' since the KiCad output-typ; Pinout is taken from the D package top-view diagram on page 1 and cross-checked against the Terminal"
        ],
        "pages_sent": 23,
        "cost_usd": 0.0813,
        "at": "2026-11-10T09:37:35"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tpic2810.pdf",
        "pages": 23,
        "sha256": "e9e24b98c49770a4",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tpic2810d.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tpic2810d-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b5d729d0f7c9a072c82005616ed95e53ec8beb53915c446a1f12221afa97bf75",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "D",
      "E1": {
        "nom_mm": 3.9,
        "range_mm": null
      },
      "E": {
        "nom_mm": 6.0,
        "range_mm": null
      },
      "e": {
        "nom_mm": 1.27,
        "range_mm": null
      },
      "source": "TI package designator D (no drawing in the datasheet)",
      "model_check": {
        "file": "tpic2810d.step",
        "verdict": "SKIP",
        "reasons": [
          "the datasheet dimensions give no height or body size to compare"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}