3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPIC2810D
Texas Instruments · LED Drivers · SOIC-16
TPIC2810D from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Logic supply voltage input, recommended range 3.0 V to 5.5 V and absolute maximum 7 V with respect to GND. |
| 2 | SDA | bidirectional | Open-drain bidirectional I2C serial data terminal that requires an external pullup resistor. |
| 3 | DRAIN0 | output | Low-side power DMOS FET drain output for resistive loads, rated 40 V drain-to-source and 100 mA continuous sink current. |
| 4 | DRAIN1 | output | Low-side power DMOS FET drain output for resistive loads, rated 40 V drain-to-source and 100 mA continuous sink current. |
| 5 | DRAIN2 | output | Low-side power DMOS FET drain output for resistive loads, rated 40 V drain-to-source and 100 mA continuous sink current. |
| 6 | DRAIN3 | output | Low-side power DMOS FET drain output for resistive loads, rated 40 V drain-to-source and 100 mA continuous sink current. |
| 7 | A2 | input | Address input 2 that sets the device's I2C slave address bit A2. |
| 8 | G | input | Active-low output enable; driving G high turns all drain outputs off, and driving it low makes the output storage register transparent to the outputs. |
| 9 | A0 | input | Address input 0 that sets the device's I2C slave address bit A0. |
| 10 | A1 | input | Address input 1 that sets the device's I2C slave address bit A1. |
| 11 | DRAIN4 | output | Low-side power DMOS FET drain output for resistive loads, rated 40 V drain-to-source and 100 mA continuous sink current. |
| 12 | DRAIN5 | output | Low-side power DMOS FET drain output for resistive loads, rated 40 V drain-to-source and 100 mA continuous sink current. |
| 13 | DRAIN6 | output | Low-side power DMOS FET drain output for resistive loads, rated 40 V drain-to-source and 100 mA continuous sink current. |
| 14 | DRAIN7 | output | Low-side power DMOS FET drain output for resistive loads, rated 40 V drain-to-source and 100 mA continuous sink current. |
| 15 | SCL | input | I2C serial clock input, specified for 100 kHz, 400 kHz and 2 MHz operation. |
| 16 | GND | power_in | Ground reference; all device voltages are specified with respect to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16 |
| Category | LED Drivers |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic supply voltage | VCC | 3 | 5.5 | V | 5 | ||
| Drain-to-source breakdown voltage | V(BR)DSX | 40 | V | ID = 1 mA | 5 | ||
| Source-to-drain diode forward voltage | VSD | 0.85 | 1.2 | V | IF = 100 mA | 5 | |
| High-level input current | IIH | 1 | µA | VCC = 5.5 V, VI = VCC | 5 | ||
| Low-level input current | IIL | -1 | µA | VCC = 5.5 V, VI = 0 | 5 | ||
| Low level output current; SDA | IOL | 13 | mA | VOL = 0.4 V | 5 | ||
| Leakage current; SDA | IL | -1 | 1 | µA | VI = VCC | 5 | |
| Logic supply current, all outputs off | ICC | 0.62 | 1 | mA | VCC = 5.5 V, all outputs off | 5 | |
| Logic supply current, all outputs on | ICC | 0.7 | 1 | mA | VCC = 5.5 V, all outputs on | 5 | |
| Logic supply current at frequency | ICC(FRQ) | 0.74 | 1 | mA | fSCL = 100 kHz, all outputs off, CL = 30 pF, See Figure 3 | 5 | |
| Off-state drain current | IDSX | 0.3 | 0.6 | µA | VDS = 30 V, VCC = 5.5 V | 5 | |
| Thermal shutdown hysteresis | THYS | 10 | 20 | 30 | °C | 5 | |
| Static drain-source on-state resistance | rDS(on) | 8 | 10.8 | Ω | ID = 100 mA, VCC = 3 V | 5 | |
| Static drain-source on-state resistance | rDS(on) | 5.1 | 6.9 | Ω | ID = 100 mA, VCC = 4.5 V | 5 | |
| Static drain-source on-state resistance | rDS(on) | 13 | 18.2 | Ω | ID = 100 mA, VCC = 3.0 V, TC = 125°C | 5 | |
| Static drain-source on-state resistance | rDS(on) | 8 | 11.2 | Ω | ID = 100 mA, VCC = 4.5 V, TC = 125°C | 5 | |
| Logic supply voltage | VCC | 3 | 5.5 | V | 4 | ||
| Pulse drain output current | 210 | mA | TC = 25°C, VCC = 5 V, all outputs on (see Notes 3 and 4 and Figure 8) | 4 | |||
| Operating case temperature | TC | -40 | 125 | °C | 4 | ||
| Logic supply voltage | VCC | 7 | V | see Note 1 (voltages with respect to GND) | 4 | ||
| Logic input voltage range | VI | -0.3 | 7 | V | 4 | ||
| Power DMOS drain-to-source voltage | VDS | 40 | V | see Note 2 | 4 | ||
| Continuous source-to-drain diode anode current | 210 | mA | 4 | ||||
| Pulsed source-to-drain diode anode current | 420 | mA | see Note 3 (pulse duration ≤ 100 µs, duty cycle ≤ 2%) | 4 | |||
| Pulsed drain current, each output, all outputs on | ID | 210 | mA | TC = 25°C (see Note 3) | 4 | ||
| Peak drain current, single output | IDM | 210 | mA | TC = 25°C (see Note 3) | 4 | ||
| Operating virtual junction temperature range | TJ | -40 | 150 | °C | 4 | ||
| Operating case temperature range | TC | -40 | 125 | °C | 4 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 115 | °C/W | All 8 outputs with equal power | 7 | ||
| Serial clock frequency | f(SCL) | 100 | kHz | 6 | |||
| Serial clock frequency | f(SCL) | 400 | kHz | 6 | |||
| Bus free time between stop and start condition | t(BUF) | 4.7 | µs | SCL = 100 kHz | 6 | ||
| Bus free time between stop and start condition | t(BUF) | 1.3 | µs | SCL = 400 kHz | 6 | ||
| Tolerable spike width on bus | t(SP) | 50 | ns | 6 | |||
| SCL low to data out valid (acknowledge) | tpd(ACK) | 120 | ns | 6 | |||
| SCL low time | tLOW | 4.7 | µs | SCL = 100 kHz | 6 | ||
| SCL low time | tLOW | 1.3 | µs | SCL = 400 kHz | 6 | ||
| SCL high time | tHIGH | 4 | µs | SCL = 100 kHz | 6 | ||
| SCL high time | tHIGH | 600 | ns | SCL = 400 kHz | 6 | ||
| SDA to SCL setup time | tsu(DAT) | 250 | ns | SCL = 100 kHz | 6 | ||
| SDA to SCL setup time | tsu(DAT) | 100 | ns | SCL = 400 kHz | 6 | ||
| Start condition setup time | tsu(STA) | 4.7 | µs | SCL = 100 kHz | 6 | ||
| Start condition setup time | tsu(STA) | 600 | ns | SCL = 400 kHz | 6 | ||
| Stop condition setup time | tsu(STO) | 4 | µs | SCL = 100 kHz | 6 | ||
| Stop condition setup time | tsu(STO) | 600 | ns | SCL = 400 kHz | 6 | ||
| SDA to SCL hold time | th(DAT) | 50 | ns | 6 | |||
| Start condition hold time | th(STA) | 4 | µs | SCL = 100 kHz | 6 | ||
| Start condition hold time | th(STA) | 600 | ns | SCL = 400 kHz | 6 | ||
| Rise time of SCL signal | tr(SCL) | 1000 | ns | SCL = 100 kHz | 6 | ||
| Rise time of SCL signal | tr(SCL) | 300 | ns | SCL = 400 kHz | 6 | ||
| Fall time of SCL signal | tf(SCL) | 300 | ns | SCL = 100 kHz | 6 | ||
| Rise time of SDA signal | tr(SDA) | 1000 | ns | SCL = 100 kHz | 6 | ||
| Rise time of SDA signal | tr(SDA) | 300 | ns | SCL = 400 kHz | 6 | ||
| Fall time of SDA signal | tf(SDA) | 300 | ns | SCL = 100 kHz | 6 | ||
| Rise time, drain output | tr(OUT) | 1.05 | µs | ID = 75 mA, See Figures 1, 2, and 6 | 6 | ||
| Fall time, drain output | tf(OUT) | 0.89 | µs | 6 |
CAD (KiCad official)
- Symbol:
TPIC2810D - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
tpic2810d-etched.step/tpic2810d-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tpic2810d.step/tpic2810d.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (23 pp, sha256
e9e24b98c49770a4, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).