main
Ray
Publish 0.1.0
898662e
TPC112S1-VR
3PEAK · IC · MSOP-8
TPC112S1-VR from 3PEAK, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply input with a supply range of 2.7 V to 5.5 V. |
| 2 | VREF | power_in | Reference voltage input with a typical input impedance of 333 kΩ, accepting an input voltage from +2 V to VDD. |
| 3 | VFB | input | Feedback connection to the inverting input of the output amplifier; for voltage output operation it must be tied externally to VOUT. |
| 4 | VOUT | output | Analog DAC output voltage from the rail-to-rail buffered output amplifier, which swings from 0 V to VDD. |
| 5 | SYNC | input | Active-LOW, level-triggered frame synchronization input with Schmitt-trigger logic; the DAC updates on the 16th falling SCLK edge unless SYNC is taken HIGH earlier, which aborts the write. |
| 6 | SCLK | input | Serial clock input with Schmitt-trigger logic, supporting data transfer at rates up to 30 MHz. |
| 7 | DIN | input | Serial data input with Schmitt-trigger logic, clocked into the 16-bit input shift register on each SCLK falling edge, MSB first. |
| 8 | GND | power_in | Ground reference point for all circuitry on the part. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | 3PEAK |
| Package | MSOP-8 |
| Category | |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Integral Nonlinearity (12-bit) | INL | -2 | 0.25 | 2 | LSB | (Note 6) | 3 |
| Differential Nonlinearity (12-bit) | DNL | -1 | 0.05 | 1 | LSB | (Note 6) | 3 |
| Zero Offset Error | OE | 6.5 | 30 | mV | 3 | ||
| Full-Scale Offset Error | -30 | 0 | 30 | mV | 3 | ||
| Offset-Error Drift | -1 | 1 | 1 | μV/°C | 3 | ||
| Gain Error | GE | -0.3 | 0.13 | 0.3 | %FS | 3 | |
| Gain Temperature Coefficient | -2 | 2 | 2 | ppmFS/°C | 3 | ||
| Reference-Input Voltage Range | VREF | 2 | V | 3 | |||
| Capacitive Load | CL | 0.1 | nF | Series resistance = 0Ω (Note 8) | 3 | ||
| Capacitive Load | CL | 15 | μF | Series resistance = 1kΩ (Note 8) | 3 | ||
| Resistive Load | RL | 5 | kΩ | (Note 8) | 3 | ||
| Short-Circuit Current | 35 | mA | VDD = 5.5V | 3 | |||
| Power-Up Time | 25 | μs | From power-down mode | 3 | |||
| Input High Voltage | VIH | 2 | V | VDD = 5V | 3 | ||
| Input High Voltage | VIH | 1.5 | V | VDD = 3.3V | 3 | ||
| Input Low Voltage | VIL | 0.6 | V | VDD = 5V | 3 | ||
| Input Low Voltage | VIL | 0.4 | V | VDD = 3.3V | 3 | ||
| Input Leakage Current | IIN | -1 | 0.1 | 1 | μA | VIN = 0V or VDD | 3 |
| Supply Voltage | VDD | 2.7 | 5.5 | V | 4 | ||
| Supply Current | IDD | 90 | 130 | μA | No load; all digital inputs at 0V or VDD, supply current only; excludes reference input current, midscale | 4 | |
| Power-Down Supply Current | 0.4 | 1 | μA | No load, all digital inputs at 0V or VDD | 4 | ||
| SCLK Serial Clock Frequency | fSCLK | 0 | 30 | MHz | 5 | ||
| SCLK Pulse-Width High | tCH | 8 | ns | 5 | |||
| SCLK Pulse-Width Low | tCL | 8 | ns | 5 | |||
| SYNC Fall to SCLK Fall Setup Time | tCSS0 | 8 | ns | 5 | |||
| SYNC Fall to SCLK Fall Hold Time | tCSH0 | 0 | ns | 5 | |||
| SYNC Rise to SCLK Fall Hold Time | tCSH1 | 0 | ns | 5 | |||
| SYNC Rise to SCLK Fall | tCSA | 12 | ns | 5 | |||
| SCLK Fall to SYNC Fall | tCSF | 100 | ns | 5 | |||
| DIN to SCLK Fall Setup Time | tDS | 5 | ns | 5 | |||
| DIN to SCLK Fall Hold Time | tDH | 4.5 | ns | 5 | |||
| SYNC Pulse-Width High | tCSPW | 20 | ns | 5 | |||
| SYNC Pulse-Width Low | tCLPW | 20 | ns | 5 | |||
| SYNC Rise to SYNC Fall | tCSC | 20 | ns | 5 | |||
| Supply Voltage (V+, V-) | V+, V- | 6.5 | V | 2 | |||
| Input Current (+IN, -IN) | -20 | 20 | mA | 2 | |||
| Operating Temperature Range | -40 | 125 | °C | 2 | |||
| Maximum Junction Temperature | 150 | °C | 2 | ||||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature (Soldering) | 260 | °C | Soldering, 10 sec | 2 | |||
| Thermal Resistance, Junction-to-Ambient (8-Pin MSOP) | θJA | 210 | °C/W | 2 | |||
| Thermal Resistance, Junction-to-Case (8-Pin MSOP) | θJC | 45 | °C/W | 2 |
CAD (KiCad official)
- Symbol:
TPC112S1-VR - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
tpc112s1-vr-etched.step/tpc112s1-vr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tpc112s1-vr.step/tpc112s1-vr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: 3PEAK datasheet (17 pp, sha256
b7709a86be26f41c, retrieved 2026-10-24, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TPC112S1-VR
**3PEAK** · IC · MSOP-8
TPC112S1-VR from 3PEAK, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply input with a supply range of 2.7 V to 5.5 V. |
| 2 | VREF | power_in | Reference voltage input with a typical input impedance of 333 kΩ, accepting an input voltage from +2 V to VDD. |
| 3 | VFB | input | Feedback connection to the inverting input of the output amplifier; for voltage output operation it must be tied externally to VOUT. |
| 4 | VOUT | output | Analog DAC output voltage from the rail-to-rail buffered output amplifier, which swings from 0 V to VDD. |
| 5 | SYNC | input | Active-LOW, level-triggered frame synchronization input with Schmitt-trigger logic; the DAC updates on the 16th falling SCLK edge unless SYNC is taken HIGH earlier, which aborts the write. |
| 6 | SCLK | input | Serial clock input with Schmitt-trigger logic, supporting data transfer at rates up to 30 MHz. |
| 7 | DIN | input | Serial data input with Schmitt-trigger logic, clocked into the 16-bit input shift register on each SCLK falling edge, MSB first. |
| 8 | GND | power_in | Ground reference point for all circuitry on the part. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | 3PEAK |
| Package | MSOP-8 |
| Category | |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Integral Nonlinearity (12-bit) | INL | -2 | 0.25 | 2 | LSB | (Note 6) | 3 |
| Differential Nonlinearity (12-bit) | DNL | -1 | 0.05 | 1 | LSB | (Note 6) | 3 |
| Zero Offset Error | OE | | 6.5 | 30 | mV | | 3 |
| Full-Scale Offset Error | | -30 | 0 | 30 | mV | | 3 |
| Offset-Error Drift | | -1 | 1 | 1 | μV/°C | | 3 |
| Gain Error | GE | -0.3 | 0.13 | 0.3 | %FS | | 3 |
| Gain Temperature Coefficient | | -2 | 2 | 2 | ppmFS/°C | | 3 |
| Reference-Input Voltage Range | VREF | 2 | | | V | | 3 |
| Capacitive Load | CL | | | 0.1 | nF | Series resistance = 0Ω (Note 8) | 3 |
| Capacitive Load | CL | | | 15 | μF | Series resistance = 1kΩ (Note 8) | 3 |
| Resistive Load | RL | 5 | | | kΩ | (Note 8) | 3 |
| Short-Circuit Current | | | | 35 | mA | VDD = 5.5V | 3 |
| Power-Up Time | | | | 25 | μs | From power-down mode | 3 |
| Input High Voltage | VIH | 2 | | | V | VDD = 5V | 3 |
| Input High Voltage | VIH | 1.5 | | | V | VDD = 3.3V | 3 |
| Input Low Voltage | VIL | | | 0.6 | V | VDD = 5V | 3 |
| Input Low Voltage | VIL | | | 0.4 | V | VDD = 3.3V | 3 |
| Input Leakage Current | IIN | -1 | 0.1 | 1 | μA | VIN = 0V or VDD | 3 |
| Supply Voltage | VDD | 2.7 | | 5.5 | V | | 4 |
| Supply Current | IDD | | 90 | 130 | μA | No load; all digital inputs at 0V or VDD, supply current only; excludes reference input current, midscale | 4 |
| Power-Down Supply Current | | | 0.4 | 1 | μA | No load, all digital inputs at 0V or VDD | 4 |
| SCLK Serial Clock Frequency | fSCLK | 0 | | 30 | MHz | | 5 |
| SCLK Pulse-Width High | tCH | 8 | | | ns | | 5 |
| SCLK Pulse-Width Low | tCL | 8 | | | ns | | 5 |
| SYNC Fall to SCLK Fall Setup Time | tCSS0 | 8 | | | ns | | 5 |
| SYNC Fall to SCLK Fall Hold Time | tCSH0 | 0 | | | ns | | 5 |
| SYNC Rise to SCLK Fall Hold Time | tCSH1 | 0 | | | ns | | 5 |
| SYNC Rise to SCLK Fall | tCSA | 12 | | | ns | | 5 |
| SCLK Fall to SYNC Fall | tCSF | 100 | | | ns | | 5 |
| DIN to SCLK Fall Setup Time | tDS | 5 | | | ns | | 5 |
| DIN to SCLK Fall Hold Time | tDH | 4.5 | | | ns | | 5 |
| SYNC Pulse-Width High | tCSPW | 20 | | | ns | | 5 |
| SYNC Pulse-Width Low | tCLPW | 20 | | | ns | | 5 |
| SYNC Rise to SYNC Fall | tCSC | 20 | | | ns | | 5 |
| Supply Voltage (V+, V-) | V+, V- | | | 6.5 | V | | 2 |
| Input Current (+IN, -IN) | | -20 | | 20 | mA | | 2 |
| Operating Temperature Range | | -40 | | 125 | °C | | 2 |
| Maximum Junction Temperature | | | | 150 | °C | | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Lead Temperature (Soldering) | | | | 260 | °C | Soldering, 10 sec | 2 |
| Thermal Resistance, Junction-to-Ambient (8-Pin MSOP) | θJA | | 210 | | °C/W | | 2 |
| Thermal Resistance, Junction-to-Case (8-Pin MSOP) | θJC | | 45 | | °C/W | | 2 |
## CAD (KiCad official)
- Symbol: `TPC112S1-VR`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `tpc112s1-vr-etched.step` / `tpc112s1-vr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tpc112s1-vr.step` / `tpc112s1-vr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [3PEAK datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589838605788487680) (17 pp, sha256 `b7709a86be26f41c`, retrieved 2026-10-24, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tpc112s1-vr-datasheet.pdf)