main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tpc112s1-vr: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tpc112s1-vr-etched.glb Publish 0.1.0 · Ray
tpc112s1-vr-etched.step tpc112s1-vr: factory component page (tier=lcsc) · Ray
tpc112s1-vr-hero.glb tpc112s1-vr: hero GLB from the etched model (keeps the MPN mark) · Ray
tpc112s1-vr-hero.overlay.json Publish 0.1.0 · Ray
tpc112s1-vr.glb Publish 0.1.0 · Ray
tpc112s1-vr.kicad_mod Publish 0.1.0 · Ray
tpc112s1-vr.kicad_sym Publish 0.1.0 · Ray
tpc112s1-vr.lbr Publish 0.1.0 · Ray
tpc112s1-vr.step Publish 0.1.0 · Ray

TPC112S1-VR

3PEAK · IC · MSOP-8

TPC112S1-VR from 3PEAK, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Power supply input with a supply range of 2.7 V to 5.5 V.
2 VREF power_in Reference voltage input with a typical input impedance of 333 kΩ, accepting an input voltage from +2 V to VDD.
3 VFB input Feedback connection to the inverting input of the output amplifier; for voltage output operation it must be tied externally to VOUT.
4 VOUT output Analog DAC output voltage from the rail-to-rail buffered output amplifier, which swings from 0 V to VDD.
5 SYNC input Active-LOW, level-triggered frame synchronization input with Schmitt-trigger logic; the DAC updates on the 16th falling SCLK edge unless SYNC is taken HIGH earlier, which aborts the write.
6 SCLK input Serial clock input with Schmitt-trigger logic, supporting data transfer at rates up to 30 MHz.
7 DIN input Serial data input with Schmitt-trigger logic, clocked into the 16-bit input shift register on each SCLK falling edge, MSB first.
8 GND power_in Ground reference point for all circuitry on the part.

Key specifications

Parameter Value
Manufacturer 3PEAK
Package MSOP-8
Category
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Integral Nonlinearity (12-bit) INL -2 0.25 2 LSB (Note 6) 3
Differential Nonlinearity (12-bit) DNL -1 0.05 1 LSB (Note 6) 3
Zero Offset Error OE 6.5 30 mV 3
Full-Scale Offset Error -30 0 30 mV 3
Offset-Error Drift -1 1 1 μV/°C 3
Gain Error GE -0.3 0.13 0.3 %FS 3
Gain Temperature Coefficient -2 2 2 ppmFS/°C 3
Reference-Input Voltage Range VREF 2 V 3
Capacitive Load CL 0.1 nF Series resistance = 0Ω (Note 8) 3
Capacitive Load CL 15 μF Series resistance = 1kΩ (Note 8) 3
Resistive Load RL 5 kΩ (Note 8) 3
Short-Circuit Current 35 mA VDD = 5.5V 3
Power-Up Time 25 μs From power-down mode 3
Input High Voltage VIH 2 V VDD = 5V 3
Input High Voltage VIH 1.5 V VDD = 3.3V 3
Input Low Voltage VIL 0.6 V VDD = 5V 3
Input Low Voltage VIL 0.4 V VDD = 3.3V 3
Input Leakage Current IIN -1 0.1 1 μA VIN = 0V or VDD 3
Supply Voltage VDD 2.7 5.5 V 4
Supply Current IDD 90 130 μA No load; all digital inputs at 0V or VDD, supply current only; excludes reference input current, midscale 4
Power-Down Supply Current 0.4 1 μA No load, all digital inputs at 0V or VDD 4
SCLK Serial Clock Frequency fSCLK 0 30 MHz 5
SCLK Pulse-Width High tCH 8 ns 5
SCLK Pulse-Width Low tCL 8 ns 5
SYNC Fall to SCLK Fall Setup Time tCSS0 8 ns 5
SYNC Fall to SCLK Fall Hold Time tCSH0 0 ns 5
SYNC Rise to SCLK Fall Hold Time tCSH1 0 ns 5
SYNC Rise to SCLK Fall tCSA 12 ns 5
SCLK Fall to SYNC Fall tCSF 100 ns 5
DIN to SCLK Fall Setup Time tDS 5 ns 5
DIN to SCLK Fall Hold Time tDH 4.5 ns 5
SYNC Pulse-Width High tCSPW 20 ns 5
SYNC Pulse-Width Low tCLPW 20 ns 5
SYNC Rise to SYNC Fall tCSC 20 ns 5
Supply Voltage (V+, V-) V+, V- 6.5 V 2
Input Current (+IN, -IN) -20 20 mA 2
Operating Temperature Range -40 125 °C 2
Maximum Junction Temperature 150 °C 2
Storage Temperature Range -65 150 °C 2
Lead Temperature (Soldering) 260 °C Soldering, 10 sec 2
Thermal Resistance, Junction-to-Ambient (8-Pin MSOP) θJA 210 °C/W 2
Thermal Resistance, Junction-to-Case (8-Pin MSOP) θJC 45 °C/W 2

CAD (KiCad official)

  • Symbol: TPC112S1-VR
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: tpc112s1-vr-etched.step / tpc112s1-vr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tpc112s1-vr.step / tpc112s1-vr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: 3PEAK datasheet (17 pp, sha256 b7709a86be26f41c, retrieved 2026-10-24, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF