TPA751DGNR

{
  "schema_version": 1,
  "type": "component",
  "slug": "tpa751dgnr",
  "title": "TPA751DGNR",
  "brief": "Texas Instruments Audio Amplifiers, HVSSOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "amplifiers-comparators",
    "tpa751dgnr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "TPA751DGNR",
    "manufacturer": "Texas Instruments",
    "package": "HVSSOP-8-EP",
    "pin_count": 9,
    "category": "Amplifiers/Comparators",
    "subcategory": "Audio Amplifiers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tpa751",
    "parts": {
      "symbol": "tpa751dgnr.kicad_sym",
      "footprint": "tpa751dgnr.kicad_mod",
      "model_3d": "tpa751dgnr-hero.glb",
      "model_3d_plain": "tpa751dgnr.glb",
      "model_3d_step": "tpa751dgnr-etched.step",
      "model_3d_step_plain": "tpa751dgnr.step",
      "lbr": "tpa751dgnr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2861904",
      "digikey": "296-10856-2-ND",
      "mouser": "595-TPA751DGNR"
    },
    "distributor_check": {
      "checked_at": "2026-10-07T23:31:36Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-10856-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPA751DGNR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SHUTDOWN",
        "type": "input",
        "description": "SHUTDOWN places the entire device in shutdown mode when held low (IDD = 1.5 nA); the high-level input is 0.9VDD minimum and the low-level input is 0.1VDD maximum."
      },
      {
        "number": "2",
        "name": "BYPASS",
        "type": "input",
        "description": "BYPASS is the tap to the voltage divider for internal mid-supply bias and should be connected to a 0.1-µF to 2.2-µF capacitor when used as an audio amplifier."
      },
      {
        "number": "3",
        "name": "IN+",
        "type": "input",
        "description": "IN+ is the noninverting input and is typically tied to the BYPASS terminal for single-ended (SE) input."
      },
      {
        "number": "4",
        "name": "IN−",
        "type": "input",
        "description": "IN− is the inverting input and is typically used as the audio input terminal."
      },
      {
        "number": "5",
        "name": "VO+",
        "type": "output",
        "description": "VO+ is the positive bridge-tied load (BTL) audio output."
      },
      {
        "number": "6",
        "name": "VDD",
        "type": "power_in",
        "description": "VDD is the supply voltage terminal, with a recommended operating range of 2.5 V to 5.5 V and an absolute maximum of 6 V."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "GND is the ground connection."
      },
      {
        "number": "8",
        "name": "VO−",
        "type": "output",
        "description": "VO− is the negative bridge-tied load (BTL) audio output."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The DGN package has an exposed thermal PowerPAD (shaded on the top view, to be tied to the ground pl; The excerpt covers only 6 of 32 pages (pages 1-3, 19-21). The DGN pinout comes from the terminal-fun",
          "exposed pad 9 added from the footprint"
        ],
        "pages_sent": 6,
        "cost_usd": 0.0758,
        "at": "2026-10-07T23:31:17"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tpa751",
        "pages": 32,
        "sha256": "64a5df28bb743dbd",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tpa751dgnr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.91,
          3,
          1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "dbf302e7d87685655cb9fbdfc4c2e8f3860757b186015ea06adcb3b9d5cc6607",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tpa751dgnr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.91,
          3.0,
          1.0
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "431dfadc9045a0b7fe6af950f95b1d5cd20bfdc560da9cbb16c7099edbc63a6a",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "HVSSOP-8-EP",
      "Category": "Amplifiers/Comparators",
      "Pins": "9"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "64a5df28bb743dbd",
      "rows": [
        {
          "name": "Supply voltage, VDD",
          "symbol": "VDD",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 2.5,
          "typ": null,
          "max": 5.5,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Operating free-air temperature, TA",
          "symbol": "TA",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 85,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Supply voltage, VDD",
          "symbol": "VDD",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 6,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Input voltage, VI",
          "symbol": "VI",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": null,
          "conditions": "Upper limit printed as VDD + 0.3 V (not a numeric value)",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Operating free-air temperature range, TA",
          "symbol": "TA",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 85,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Operating junction temperature range, TJ",
          "symbol": "TJ",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Storage temperature range, Tstg",
          "symbol": "Tstg",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -65,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Lead temperature",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": null,
          "typ": null,
          "max": 260,
          "conditions": "1,6 mm (1/16 inch) from case for 10 seconds",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Supply current",
          "symbol": "IDD",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 1.25,
          "max": 2.5,
          "conditions": "VDD = 3.3 V; SHUTDOWN = VDD, RF = 10 kΩ",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Supply current, shutdown mode",
          "symbol": "IDD(SD)",
          "kind": "electrical",
          "unit": "nA",
          "min": null,
          "typ": 1.5,
          "max": 1000,
          "conditions": "VDD = 3.3 V; SHUTDOWN = 0 V, RF = 10 kΩ",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "SHUTDOWN input current high",
          "symbol": "|IIH|",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": null,
          "max": 1,
          "conditions": "VDD = 3.3 V; SHUTDOWN, Vi = VDD",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "SHUTDOWN input current low",
          "symbol": "|IIL|",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": null,
          "max": 1,
          "conditions": "VDD = 3.3 V; SHUTDOWN, Vi = 0 V",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Output offset voltage (measured differentially)",
          "symbol": "|VOS|",
          "kind": "electrical",
          "unit": "mV",
          "min": null,
          "typ": null,
          "max": 20,
          "conditions": "VDD = 3.3 V; SHUTDOWN = VDD, RL = 8 Ω, RF = 10 kΩ",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Power supply rejection ratio",
          "symbol": "PSRR",
          "kind": "electrical",
          "unit": "dB",
          "min": null,
          "typ": 85,
          "max": null,
          "conditions": "VDD = 3.2 V to 3.4 V",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Output power",
          "symbol": "PO",
          "kind": "electrical",
          "unit": "mW",
          "min": null,
          "typ": 250,
          "max": null,
          "conditions": "VDD = 3.3 V, RL = 8 Ω; THD = 0.2%, See Figure 9",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Total harmonic distortion plus noise",
          "symbol": "THD+N",
          "kind": "electrical",
          "unit": "%",
          "min": null,
          "typ": 0.55,
          "max": null,
          "conditions": "VDD = 3.3 V; PO = 250 mW, f = 200 Hz to 4 kHz, See Figure 7",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Maximum output power bandwidth",
          "symbol": "BOM",
          "kind": "electrical",
          "unit": "kHz",
          "min": null,
          "typ": 20,
          "max": null,
          "conditions": "VDD = 3.3 V; AV = −2 V/V, THD = 2%, See Figure 7",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Unity-gain bandwidth",
          "symbol": "B1",
          "kind": "electrical",
          "unit": "MHz",
          "min": null,
          "typ": 1.4,
          "max": null,
          "conditions": "VDD = 3.3 V; Open loop, See Figure 15",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Supply ripple rejection ratio",
          "symbol": "kSVR",
          "kind": "electrical",
          "unit": "dB",
          "min": null,
          "typ": 79,
          "max": null,
          "conditions": "VDD = 3.3 V; f = 1 kHz, CB = 1 µF, See Figure 2",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Noise output voltage",
          "symbol": "Vn",
          "kind": "electrical",
          "unit": "µV(rms)",
          "min": null,
          "typ": 17,
          "max": null,
          "conditions": "VDD = 3.3 V; AV = −1 V/V, CB = 0.1 µF, See Figure 19",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Power supply rejection ratio",
          "symbol": "PSRR",
          "kind": "electrical",
          "unit": "dB",
          "min": null,
          "typ": 78,
          "max": null,
          "conditions": "VDD = 4.9 V to 5.1 V",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Supply current",
          "symbol": "IDD",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 1.45,
          "max": 2.5,
          "conditions": "VDD = 5 V; SHUTDOWN = VDD, RF = 10 kΩ",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Supply current, shutdown mode",
          "symbol": "IDD(SD)",
          "kind": "electrical",
          "unit": "nA",
          "min": null,
          "typ": 5,
          "max": 1500,
          "conditions": "VDD = 5 V; SHUTDOWN = 0 V, RF = 10 kΩ",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Output power",
          "symbol": "PO",
          "kind": "electrical",
          "unit": "mW",
          "min": null,
          "typ": 700,
          "max": null,
          "conditions": "VDD = 5 V, RL = 8 Ω; THD = 0.5%, See Figure 13",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Total harmonic distortion plus noise",
          "symbol": "THD+N",
          "kind": "electrical",
          "unit": "%",
          "min": null,
          "typ": 0.5,
          "max": null,
          "conditions": "VDD = 5 V; PO = 250 mW, f = 200 Hz to 4 kHz, See Figure 11",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Supply ripple rejection ratio",
          "symbol": "kSVR",
          "kind": "electrical",
          "unit": "dB",
          "min": null,
          "typ": 80,
          "max": null,
          "conditions": "VDD = 5 V; f = 1 kHz, CB = 1 µF, See Figure 2",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Continuous total power dissipation (DGN package)",
          "symbol": "",
          "kind": "thermal",
          "unit": "W",
          "min": null,
          "typ": 2.14,
          "max": null,
          "conditions": "DGN package, TA = 25°C",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "DGN derating factor",
          "symbol": "",
          "kind": "thermal",
          "unit": "mW/°C",
          "min": null,
          "typ": 17.1,
          "max": null,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Continuous total power dissipation (DGN package)",
          "symbol": "",
          "kind": "thermal",
          "unit": "W",
          "min": null,
          "typ": 1.37,
          "max": null,
          "conditions": "DGN package, TA = 70°C",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Continuous total power dissipation (DGN package)",
          "symbol": "",
          "kind": "thermal",
          "unit": "W",
          "min": null,
          "typ": 1.11,
          "max": null,
          "conditions": "DGN package, TA = 85°C",
          "source_page": 2,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "tpa751dgnr"
  ],
  "discovery_pitch": "TPA751DGNR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tpa751dgnr.kicad_sym",
    "tpa751dgnr.kicad_mod",
    "tpa751dgnr.glb",
    "tpa751dgnr.step",
    "tpa751dgnr.lbr",
    "docs/hero.png",
    "docs/tpa751dgnr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tpa751dgnr-hero.glb",
    "tpa751dgnr-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}