main
History Download
Ray Publish 0.1.0 a7977c0

TPA711DGNR

Texas Instruments · Audio Power OpAmps · HVSSOP-8-EP

TPA711DGNR from Texas Instruments, in a HVSSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SHUTDOWN input SHUTDOWN places the entire device in shutdown mode when held high (IDD = 7 µA).
2 BYPASS input BYPASS is the tap to the voltage divider for internal mid-supply bias and should be connected to a 0.1-µF to 2.2-µF capacitor when used as an audio amplifier.
3 SE/BTL input When SE/BTL is held low the TPA711 is in BTL mode, and when it is held high the TPA711 is in SE mode.
4 IN input IN is the audio input terminal.
5 VO+ output VO+ is the positive output for BTL and SE modes.
6 VDD power_in VDD is the supply voltage terminal, operating over 2.5 V to 5.5 V.
7 GND power_in GND is the ground connection.
8 VO− output VO− is the negative output in BTL mode and a high-impedance output in SE mode.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HVSSOP-8-EP
Category Operational Amplifier/Comparator
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD 2.5 5.5 V 3
Operating free-air temperature TA -40 85 °C 3
Supply voltage VDD 6 V 2
Input voltage VI -0.3 V 2
Operating free-air temperature range TA -40 85 °C 2
Operating junction temperature range TJ -40 150 °C 2
Storage temperature range Tstg -65 150 °C 2
Lead temperature 260 °C 1,6 mm (1/16 inch) from case for 10 seconds 2
Power dissipation rating (DGN package) 2.14 W DGN package, TA ≤ 25°C 2
Power dissipation rating (DGN package) 1.37 W DGN package, TA = 70°C 2
Power dissipation rating (DGN package) 1.11 W DGN package, TA = 85°C 2
Supply current (BTL mode) IDD 1.25 2.5 mA VDD = 3.3 V, TA = 25°C; BTL mode, SHUTDOWN = 0 V, SE/BTL = 0.33 V, RF = 10 kΩ 3
Supply current (SE mode) IDD 0.65 1.25 mA VDD = 3.3 V, TA = 25°C; SE mode, SHUTDOWN = 0 V, SE/BTL = 2.97 V, RF = 10 kΩ 3
Supply current, shutdown mode IDD(SD) 7 50 µA VDD = 3.3 V, TA = 25°C; SE/BTL = 2.97 V, SHUTDOWN = VDD, RF = 10 kΩ 3
Supply current (BTL mode) IDD 1.25 2.5 mA VDD = 5 V, TA = 25°C; BTL mode, SHUTDOWN = 0 V, SE/BTL = 0.5 V, RF = 10 kΩ 4
Supply current (SE mode) IDD 0.65 1.25 mA VDD = 5 V, TA = 25°C; SE mode, SHUTDOWN = 0 V, SE/BTL = 4.5 V, RF = 10 kΩ 4
Supply current, shutdown mode IDD(SD) 50 100 µA VDD = 5 V, TA = 25°C; SE/BTL = 0 V, SHUTDOWN = VDD, RF = 10 kΩ 4

CAD (KiCad official)

  • Symbol: TPA711DGNR
  • Footprint: Package_SO:HVSSOP-8-1EP_3x3mm_P0.65mm_EP1.57x1.89mm
  • 3D model: HVSSOP-8-EP, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.0 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tpa711dgnr-etched.step / tpa711dgnr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tpa711dgnr.step / tpa711dgnr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (45 pp, sha256 96c4ce42225e56f8, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF