Generated by kicad-footprint-generator · KiCad file format 20260206
TPA711DGNR
Texas Instruments · Audio Power OpAmps · HVSSOP-8-EP
TPA711DGNR from Texas Instruments, in a HVSSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SHUTDOWN | input | SHUTDOWN places the entire device in shutdown mode when held high (IDD = 7 µA). |
| 2 | BYPASS | input | BYPASS is the tap to the voltage divider for internal mid-supply bias and should be connected to a 0.1-µF to 2.2-µF capacitor when used as an audio amplifier. |
| 3 | SE/BTL | input | When SE/BTL is held low the TPA711 is in BTL mode, and when it is held high the TPA711 is in SE mode. |
| 4 | IN | input | IN is the audio input terminal. |
| 5 | VO+ | output | VO+ is the positive output for BTL and SE modes. |
| 6 | VDD | power_in | VDD is the supply voltage terminal, operating over 2.5 V to 5.5 V. |
| 7 | GND | power_in | GND is the ground connection. |
| 8 | VO− | output | VO− is the negative output in BTL mode and a high-impedance output in SE mode. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HVSSOP-8-EP |
| Category | Operational Amplifier/Comparator |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | 2.5 | 5.5 | V | 3 | ||
| Operating free-air temperature | TA | -40 | 85 | °C | 3 | ||
| Supply voltage | VDD | 6 | V | 2 | |||
| Input voltage | VI | -0.3 | V | 2 | |||
| Operating free-air temperature range | TA | -40 | 85 | °C | 2 | ||
| Operating junction temperature range | TJ | -40 | 150 | °C | 2 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 2 | ||
| Lead temperature | 260 | °C | 1,6 mm (1/16 inch) from case for 10 seconds | 2 | |||
| Power dissipation rating (DGN package) | 2.14 | W | DGN package, TA ≤ 25°C | 2 | |||
| Power dissipation rating (DGN package) | 1.37 | W | DGN package, TA = 70°C | 2 | |||
| Power dissipation rating (DGN package) | 1.11 | W | DGN package, TA = 85°C | 2 | |||
| Supply current (BTL mode) | IDD | 1.25 | 2.5 | mA | VDD = 3.3 V, TA = 25°C; BTL mode, SHUTDOWN = 0 V, SE/BTL = 0.33 V, RF = 10 kΩ | 3 | |
| Supply current (SE mode) | IDD | 0.65 | 1.25 | mA | VDD = 3.3 V, TA = 25°C; SE mode, SHUTDOWN = 0 V, SE/BTL = 2.97 V, RF = 10 kΩ | 3 | |
| Supply current, shutdown mode | IDD(SD) | 7 | 50 | µA | VDD = 3.3 V, TA = 25°C; SE/BTL = 2.97 V, SHUTDOWN = VDD, RF = 10 kΩ | 3 | |
| Supply current (BTL mode) | IDD | 1.25 | 2.5 | mA | VDD = 5 V, TA = 25°C; BTL mode, SHUTDOWN = 0 V, SE/BTL = 0.5 V, RF = 10 kΩ | 4 | |
| Supply current (SE mode) | IDD | 0.65 | 1.25 | mA | VDD = 5 V, TA = 25°C; SE mode, SHUTDOWN = 0 V, SE/BTL = 4.5 V, RF = 10 kΩ | 4 | |
| Supply current, shutdown mode | IDD(SD) | 50 | 100 | µA | VDD = 5 V, TA = 25°C; SE/BTL = 0 V, SHUTDOWN = VDD, RF = 10 kΩ | 4 |
CAD (KiCad official)
- Symbol:
TPA711DGNR - Footprint:
Package_SO:HVSSOP-8-1EP_3x3mm_P0.65mm_EP1.57x1.89mm - 3D model: HVSSOP-8-EP, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.0 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tpa711dgnr-etched.step/tpa711dgnr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tpa711dgnr.step/tpa711dgnr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (45 pp, sha256
96c4ce42225e56f8, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).