main
Ray
tpa6205a1dgnr: specified limits as data (metadata.characteristics, 49 rows from the datasheet)
a19ca06
TPA6205A1DGNR
Texas Instruments · Audio Amplifiers · MSOP-8-EP
TPA6205A1DGNR from Texas Instruments, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SHUTDOWN | input | Active-low shutdown control input with high-level threshold ≥1.15 V and low-level threshold ≤0.5 V for 1.8-V logic compatibility |
| 2 | BYPASS | passive | Mid-supply voltage reference biasing node; connect 0.47 μF capacitor to improve power supply rejection ratio to -87 dB |
| 3 | IN+ | input | Positive differential audio input; valid common-mode input voltage range 0.5 V to VDD-0.8 V |
| 4 | IN- | input | Negative differential audio input; valid common-mode input voltage range 0.5 V to VDD-0.8 V |
| 5 | VO+ | output | Positive bridge-tied-load audio output driven into 6.4-8 Ω load with ±VDD/2 voltage swing capability |
| 6 | VDD | power_in | Positive power supply input; regulated voltage range 2.5-5.5 V with 1.7 mA typical quiescent supply current |
| 7 | GND | power_in | High-current ground reference and thermal pad anchor; must be soldered to PCB for proper thermal and mechanical performance |
| 8 | VO- | output | Negative bridge-tied-load audio output driven into 6.4-8 Ω load with ±VDD/2 voltage swing capability |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-8-EP |
| Category | Amplifiers/Comparators |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | -0.3 | 6 | V | 4 | ||
| Input voltage INx and SHUTDOWN pins | VI | -0.3 | 0.3 | V | 4 | ||
| Operating free-air temperature | TA | -40 | 85 | °C | 4 | ||
| Junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Lead temperature | 260 | °C | 1.6 mm (1/16 inch) from case for 10 seconds | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage | VDD | 2.5 | 5.5 | V | 4 | ||
| High-level input voltage SHUTDOWN | VIH | 1.15 | V | 4 | |||
| Low-level input voltage SHUTDOWN | VIL | 0.5 | V | 4 | |||
| Common-mode input voltage | VIC | 0.5 | V | VDD = 2.5 V, 5.5 V, CMRR ≤ –60 dB; upper limit printed as VDD–0.8 V | 4 | ||
| Operating free-air temperature | TA | -40 | 85 | °C | 4 | ||
| Load impedance | ZL | 6.4 | 8 | Ω | 4 | ||
| Output offset voltage | VOO | 9 | mV | VI = 0 V, VDD = 2.5 V to 5.5 V (measured differentially) | 5 | ||
| Power supply rejection ratio | PSRR | -90 | -70 | dB | VDD = 2.5 V to 5.5 V | 5 | |
| Common-mode rejection ratio | CMRR | -70 | -65 | dB | VDD = 3.6 V to 5.5 V, VIC = 0.5 V to VDD – 0.8 | 5 | |
| Common-mode rejection ratio | CMRR | -62 | -55 | dB | VDD = 2.5 V, VIC = 0.5 V to 1.7 V | 5 | |
| Low-level output voltage | VOL | 0.3 | 0.46 | V | VDD = 5.5 V; RL = 8 Ω, VIN+ = VDD, VIN– = 0 V or VIN+ = 0 V, VIN– = VDD | 5 | |
| Low-level output voltage | VOL | 0.19 | 0.26 | V | VDD = 2.5 V; RL = 8 Ω, VIN+ = VDD, VIN– = 0 V or VIN+ = 0 V, VIN– = VDD | 5 | |
| Low-level output voltage | VOL | 0.22 | V | VDD = 3.6 V; RL = 8 Ω, VIN+ = VDD, VIN– = 0 V or VIN+ = 0 V, VIN– = VDD | 5 | ||
| High-level output voltage | VOH | 4.8 | 5.12 | V | VDD = 5.5 V; RL = 8 Ω, VIN+ = VDD, VIN– = 0 V or VIN+ = 0 V, VIN– = VDD | 5 | |
| High-level output voltage | VOH | 2.1 | 2.24 | V | VDD = 2.5 V; RL = 8 Ω, VIN+ = VDD, VIN– = 0 V or VIN+ = 0 V, VIN– = VDD | 5 | |
| High-level output voltage | VOH | 3.28 | V | VDD = 3.6 V; RL = 8 Ω, VIN+ = VDD, VIN– = 0 V or VIN+ = 0 V, VIN– = VDD | 5 | ||
| High-level input current | IIH | 1.2 | µA | VDD = 5.5 V, VI = 5.8 V | 5 | ||
| Low-level input current | IIL | 1.2 | µA | VDD = 5.5 V, VI = –0.3 V | 5 | ||
| Supply current | IDD | 1.7 | 2 | mA | VDD = 2.5 V to 5.5 V, No load, SHUTDOWN = VIH | 5 | |
| Supply current in shutdown mode | IDD(SD) | 0.01 | 0.9 | µA | SHUTDOWN = VIL, VDD = 2.5 V to 5.5 V, No load | 5 | |
| Output power | PO | 1.25 | W | VDD = 5 V; THD+N = 1%, f = 1 kHz | 5 | ||
| Output power | PO | 0.63 | W | VDD = 3.6 V; THD+N = 1%, f = 1 kHz | 5 | ||
| Output power | PO | 0.3 | W | VDD = 2.5 V; THD+N = 1%, f = 1 kHz | 5 | ||
| Total harmonic distortion plus noise | THD+N | 0.06 | % | VDD = 5 V, PO = 1 W, f = 1 kHz | 5 | ||
| Total harmonic distortion plus noise | THD+N | 0.07 | % | VDD = 3.6 V, PO = 0.5 W, f = 1 kHz | 5 | ||
| Total harmonic distortion plus noise | THD+N | 0.08 | % | VDD = 2.5 V, PO = 200 mW, f = 1 kHz | 5 | ||
| Supply ripple rejection ratio | kSVR | -87 | dB | C(BYPASS) = 0.47 µF, VDD = 3.6 V to 5.5 V, f = 217 Hz to 2 kHz, VRIPPLE = 200 mVPP, inputs AC-grounded with CI = 2 µF | 5 | ||
| Supply ripple rejection ratio | kSVR | -82 | dB | C(BYPASS) = 0.47 µF, VDD = 2.5 V to 3.6 V, f = 217 Hz to 2 kHz, VRIPPLE = 200 mVPP, inputs AC-grounded with CI = 2 µF | 5 | ||
| Supply ripple rejection ratio | kSVR | -74 | dB | C(BYPASS) = 0.47 µF, VDD = 2.5 V to 5.5 V, f = 40 Hz to 20 kHz, VRIPPLE = 200 mVPP, inputs AC-grounded with CI = 2 µF | 5 | ||
| Common-mode rejection ratio | CMRR | -85 | dB | VDD = 2.5 V to 5.5 V, f = 20 Hz to 1 kHz, resistor tolerance = 0.1%, gain = 4 V/V, VICM = 200 mVPP | 5 | ||
| Common-mode rejection ratio | CMRR | -74 | dB | f = 20 Hz to 20 kHz | 5 | ||
| Output impedance | ZO | 10 | kΩ | Shutdown mode | 5 | ||
| Signal-to-noise ratio | SNR | 104 | dB | VDD = 5 V, PO = 1 W | 5 | ||
| Output voltage noise | Vn | 17 | VRMS | f = 20 Hz to 20 kHz, no weighting | 5 | ||
| Output voltage noise | Vn | 13 | VRMS | f = 20 Hz to 20 kHz, A weighting | 5 | ||
| Input impedance | ZI | 2 | MΩ | 5 | |||
| Shutdown attenuation | -80 | dB | f = 20 Hz to 20 kHz, RF = RI = 20 kΩ | 5 | |||
| Junction-to-ambient thermal resistance | RθJA | 57.3 | °C/W | MSOP PowerPAD (DGN) column | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 84 | °C/W | MSOP PowerPAD (DGN) column | 4 | ||
| Junction-to-board thermal resistance | RθJB | 32.2 | °C/W | MSOP PowerPAD (DGN) column | 4 | ||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 11.8 | °C/W | MSOP PowerPAD (DGN) column | 4 | ||
| Junction-to-top characterization parameter | ψJT | 3.7 | °C/W | MSOP PowerPAD (DGN) column | 4 | ||
| Junction-to-board characterization parameter | ψJB | 32.2 | °C/W | MSOP PowerPAD (DGN) column | 4 |
CAD (KiCad official)
- Symbol:
TPA6205A1DGNR - Footprint:
Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm - 3D model: MSOP-8-EP (KiCad packages3D, STEP)
- 3D model files:
tpa6205a1dgnr-etched.step/tpa6205a1dgnr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tpa6205a1dgnr.step/tpa6205a1dgnr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (46 pp, sha256
68a4c8173270bf87, retrieved 2026-09-24, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TPA6205A1DGNR
**Texas Instruments** · Audio Amplifiers · MSOP-8-EP
TPA6205A1DGNR from Texas Instruments, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SHUTDOWN | input | Active-low shutdown control input with high-level threshold ≥1.15 V and low-level threshold ≤0.5 V for 1.8-V logic compatibility |
| 2 | BYPASS | passive | Mid-supply voltage reference biasing node; connect 0.47 μF capacitor to improve power supply rejection ratio to -87 dB |
| 3 | IN+ | input | Positive differential audio input; valid common-mode input voltage range 0.5 V to VDD-0.8 V |
| 4 | IN- | input | Negative differential audio input; valid common-mode input voltage range 0.5 V to VDD-0.8 V |
| 5 | VO+ | output | Positive bridge-tied-load audio output driven into 6.4-8 Ω load with ±VDD/2 voltage swing capability |
| 6 | VDD | power_in | Positive power supply input; regulated voltage range 2.5-5.5 V with 1.7 mA typical quiescent supply current |
| 7 | GND | power_in | High-current ground reference and thermal pad anchor; must be soldered to PCB for proper thermal and mechanical performance |
| 8 | VO- | output | Negative bridge-tied-load audio output driven into 6.4-8 Ω load with ±VDD/2 voltage swing capability |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-8-EP |
| Category | Amplifiers/Comparators |
| Pins | 9 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | -0.3 | | 6 | V | | 4 |
| Input voltage INx and SHUTDOWN pins | VI | -0.3 | | 0.3 | V | | 4 |
| Operating free-air temperature | TA | -40 | | 85 | °C | | 4 |
| Junction temperature | TJ | -40 | | 125 | °C | | 4 |
| Lead temperature | | | | 260 | °C | 1.6 mm (1/16 inch) from case for 10 seconds | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| Supply voltage | VDD | 2.5 | | 5.5 | V | | 4 |
| High-level input voltage SHUTDOWN | VIH | 1.15 | | | V | | 4 |
| Low-level input voltage SHUTDOWN | VIL | | | 0.5 | V | | 4 |
| Common-mode input voltage | VIC | 0.5 | | | V | VDD = 2.5 V, 5.5 V, CMRR ≤ –60 dB; upper limit printed as VDD–0.8 V | 4 |
| Operating free-air temperature | TA | -40 | | 85 | °C | | 4 |
| Load impedance | ZL | 6.4 | 8 | | Ω | | 4 |
| Output offset voltage | VOO | | | 9 | mV | VI = 0 V, VDD = 2.5 V to 5.5 V (measured differentially) | 5 |
| Power supply rejection ratio | PSRR | | -90 | -70 | dB | VDD = 2.5 V to 5.5 V | 5 |
| Common-mode rejection ratio | CMRR | | -70 | -65 | dB | VDD = 3.6 V to 5.5 V, VIC = 0.5 V to VDD – 0.8 | 5 |
| Common-mode rejection ratio | CMRR | | -62 | -55 | dB | VDD = 2.5 V, VIC = 0.5 V to 1.7 V | 5 |
| Low-level output voltage | VOL | | 0.3 | 0.46 | V | VDD = 5.5 V; RL = 8 Ω, VIN+ = VDD, VIN– = 0 V or VIN+ = 0 V, VIN– = VDD | 5 |
| Low-level output voltage | VOL | | 0.19 | 0.26 | V | VDD = 2.5 V; RL = 8 Ω, VIN+ = VDD, VIN– = 0 V or VIN+ = 0 V, VIN– = VDD | 5 |
| Low-level output voltage | VOL | | 0.22 | | V | VDD = 3.6 V; RL = 8 Ω, VIN+ = VDD, VIN– = 0 V or VIN+ = 0 V, VIN– = VDD | 5 |
| High-level output voltage | VOH | 4.8 | 5.12 | | V | VDD = 5.5 V; RL = 8 Ω, VIN+ = VDD, VIN– = 0 V or VIN+ = 0 V, VIN– = VDD | 5 |
| High-level output voltage | VOH | 2.1 | 2.24 | | V | VDD = 2.5 V; RL = 8 Ω, VIN+ = VDD, VIN– = 0 V or VIN+ = 0 V, VIN– = VDD | 5 |
| High-level output voltage | VOH | | 3.28 | | V | VDD = 3.6 V; RL = 8 Ω, VIN+ = VDD, VIN– = 0 V or VIN+ = 0 V, VIN– = VDD | 5 |
| High-level input current | IIH | | 1.2 | | µA | VDD = 5.5 V, VI = 5.8 V | 5 |
| Low-level input current | IIL | | 1.2 | | µA | VDD = 5.5 V, VI = –0.3 V | 5 |
| Supply current | IDD | | 1.7 | 2 | mA | VDD = 2.5 V to 5.5 V, No load, SHUTDOWN = VIH | 5 |
| Supply current in shutdown mode | IDD(SD) | | 0.01 | 0.9 | µA | SHUTDOWN = VIL, VDD = 2.5 V to 5.5 V, No load | 5 |
| Output power | PO | | 1.25 | | W | VDD = 5 V; THD+N = 1%, f = 1 kHz | 5 |
| Output power | PO | | 0.63 | | W | VDD = 3.6 V; THD+N = 1%, f = 1 kHz | 5 |
| Output power | PO | | 0.3 | | W | VDD = 2.5 V; THD+N = 1%, f = 1 kHz | 5 |
| Total harmonic distortion plus noise | THD+N | | 0.06 | | % | VDD = 5 V, PO = 1 W, f = 1 kHz | 5 |
| Total harmonic distortion plus noise | THD+N | | 0.07 | | % | VDD = 3.6 V, PO = 0.5 W, f = 1 kHz | 5 |
| Total harmonic distortion plus noise | THD+N | | 0.08 | | % | VDD = 2.5 V, PO = 200 mW, f = 1 kHz | 5 |
| Supply ripple rejection ratio | kSVR | | -87 | | dB | C(BYPASS) = 0.47 µF, VDD = 3.6 V to 5.5 V, f = 217 Hz to 2 kHz, VRIPPLE = 200 mVPP, inputs AC-grounded with CI = 2 µF | 5 |
| Supply ripple rejection ratio | kSVR | | -82 | | dB | C(BYPASS) = 0.47 µF, VDD = 2.5 V to 3.6 V, f = 217 Hz to 2 kHz, VRIPPLE = 200 mVPP, inputs AC-grounded with CI = 2 µF | 5 |
| Supply ripple rejection ratio | kSVR | | | -74 | dB | C(BYPASS) = 0.47 µF, VDD = 2.5 V to 5.5 V, f = 40 Hz to 20 kHz, VRIPPLE = 200 mVPP, inputs AC-grounded with CI = 2 µF | 5 |
| Common-mode rejection ratio | CMRR | | | -85 | dB | VDD = 2.5 V to 5.5 V, f = 20 Hz to 1 kHz, resistor tolerance = 0.1%, gain = 4 V/V, VICM = 200 mVPP | 5 |
| Common-mode rejection ratio | CMRR | | | -74 | dB | f = 20 Hz to 20 kHz | 5 |
| Output impedance | ZO | 10 | | | kΩ | Shutdown mode | 5 |
| Signal-to-noise ratio | SNR | | 104 | | dB | VDD = 5 V, PO = 1 W | 5 |
| Output voltage noise | Vn | | 17 | | VRMS | f = 20 Hz to 20 kHz, no weighting | 5 |
| Output voltage noise | Vn | | 13 | | VRMS | f = 20 Hz to 20 kHz, A weighting | 5 |
| Input impedance | ZI | | 2 | | MΩ | | 5 |
| Shutdown attenuation | | | -80 | | dB | f = 20 Hz to 20 kHz, RF = RI = 20 kΩ | 5 |
| Junction-to-ambient thermal resistance | RθJA | | 57.3 | | °C/W | MSOP PowerPAD (DGN) column | 4 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 84 | | °C/W | MSOP PowerPAD (DGN) column | 4 |
| Junction-to-board thermal resistance | RθJB | | 32.2 | | °C/W | MSOP PowerPAD (DGN) column | 4 |
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | | 11.8 | | °C/W | MSOP PowerPAD (DGN) column | 4 |
| Junction-to-top characterization parameter | ψJT | | 3.7 | | °C/W | MSOP PowerPAD (DGN) column | 4 |
| Junction-to-board characterization parameter | ψJB | | 32.2 | | °C/W | MSOP PowerPAD (DGN) column | 4 |
## CAD (KiCad official)
- Symbol: `TPA6205A1DGNR`
- Footprint: `Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm`
- 3D model: MSOP-8-EP (KiCad packages3D, STEP)
- 3D model files: `tpa6205a1dgnr-etched.step` / `tpa6205a1dgnr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tpa6205a1dgnr.step` / `tpa6205a1dgnr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tpa6205a1) (46 pp, sha256 `68a4c8173270bf87`, retrieved 2026-09-24, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tpa6205a1dgnr-datasheet.pdf)