Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPA6205A1DGNR

Texas Instruments · Audio Amplifiers · MSOP-8-EP

TPA6205A1DGNR from Texas Instruments, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SHUTDOWN input Active-low shutdown control input with high-level threshold ≥1.15 V and low-level threshold ≤0.5 V for 1.8-V logic compatibility
2 BYPASS passive Mid-supply voltage reference biasing node; connect 0.47 μF capacitor to improve power supply rejection ratio to -87 dB
3 IN+ input Positive differential audio input; valid common-mode input voltage range 0.5 V to VDD-0.8 V
4 IN- input Negative differential audio input; valid common-mode input voltage range 0.5 V to VDD-0.8 V
5 VO+ output Positive bridge-tied-load audio output driven into 6.4-8 Ω load with ±VDD/2 voltage swing capability
6 VDD power_in Positive power supply input; regulated voltage range 2.5-5.5 V with 1.7 mA typical quiescent supply current
7 GND power_in High-current ground reference and thermal pad anchor; must be soldered to PCB for proper thermal and mechanical performance
8 VO- output Negative bridge-tied-load audio output driven into 6.4-8 Ω load with ±VDD/2 voltage swing capability
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package MSOP-8-EP
Category Amplifiers/Comparators
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD -0.3 6 V 4
Input voltage INx and SHUTDOWN pins VI -0.3 0.3 V 4
Operating free-air temperature TA -40 85 °C 4
Junction temperature TJ -40 125 °C 4
Lead temperature 260 °C 1.6 mm (1/16 inch) from case for 10 seconds 4
Storage temperature Tstg -65 150 °C 4
Supply voltage VDD 2.5 5.5 V 4
High-level input voltage SHUTDOWN VIH 1.15 V 4
Low-level input voltage SHUTDOWN VIL 0.5 V 4
Common-mode input voltage VIC 0.5 V VDD = 2.5 V, 5.5 V, CMRR ≤ –60 dB; upper limit printed as VDD–0.8 V 4
Operating free-air temperature TA -40 85 °C 4
Load impedance ZL 6.4 8 Ω 4
Output offset voltage VOO 9 mV VI = 0 V, VDD = 2.5 V to 5.5 V (measured differentially) 5
Power supply rejection ratio PSRR -90 -70 dB VDD = 2.5 V to 5.5 V 5
Common-mode rejection ratio CMRR -70 -65 dB VDD = 3.6 V to 5.5 V, VIC = 0.5 V to VDD – 0.8 5
Common-mode rejection ratio CMRR -62 -55 dB VDD = 2.5 V, VIC = 0.5 V to 1.7 V 5
Low-level output voltage VOL 0.3 0.46 V VDD = 5.5 V; RL = 8 Ω, VIN+ = VDD, VIN– = 0 V or VIN+ = 0 V, VIN– = VDD 5
Low-level output voltage VOL 0.19 0.26 V VDD = 2.5 V; RL = 8 Ω, VIN+ = VDD, VIN– = 0 V or VIN+ = 0 V, VIN– = VDD 5
Low-level output voltage VOL 0.22 V VDD = 3.6 V; RL = 8 Ω, VIN+ = VDD, VIN– = 0 V or VIN+ = 0 V, VIN– = VDD 5
High-level output voltage VOH 4.8 5.12 V VDD = 5.5 V; RL = 8 Ω, VIN+ = VDD, VIN– = 0 V or VIN+ = 0 V, VIN– = VDD 5
High-level output voltage VOH 2.1 2.24 V VDD = 2.5 V; RL = 8 Ω, VIN+ = VDD, VIN– = 0 V or VIN+ = 0 V, VIN– = VDD 5
High-level output voltage VOH 3.28 V VDD = 3.6 V; RL = 8 Ω, VIN+ = VDD, VIN– = 0 V or VIN+ = 0 V, VIN– = VDD 5
High-level input current IIH 1.2 µA VDD = 5.5 V, VI = 5.8 V 5
Low-level input current IIL 1.2 µA VDD = 5.5 V, VI = –0.3 V 5
Supply current IDD 1.7 2 mA VDD = 2.5 V to 5.5 V, No load, SHUTDOWN = VIH 5
Supply current in shutdown mode IDD(SD) 0.01 0.9 µA SHUTDOWN = VIL, VDD = 2.5 V to 5.5 V, No load 5
Output power PO 1.25 W VDD = 5 V; THD+N = 1%, f = 1 kHz 5
Output power PO 0.63 W VDD = 3.6 V; THD+N = 1%, f = 1 kHz 5
Output power PO 0.3 W VDD = 2.5 V; THD+N = 1%, f = 1 kHz 5
Total harmonic distortion plus noise THD+N 0.06 % VDD = 5 V, PO = 1 W, f = 1 kHz 5
Total harmonic distortion plus noise THD+N 0.07 % VDD = 3.6 V, PO = 0.5 W, f = 1 kHz 5
Total harmonic distortion plus noise THD+N 0.08 % VDD = 2.5 V, PO = 200 mW, f = 1 kHz 5
Supply ripple rejection ratio kSVR -87 dB C(BYPASS) = 0.47 µF, VDD = 3.6 V to 5.5 V, f = 217 Hz to 2 kHz, VRIPPLE = 200 mVPP, inputs AC-grounded with CI = 2 µF 5
Supply ripple rejection ratio kSVR -82 dB C(BYPASS) = 0.47 µF, VDD = 2.5 V to 3.6 V, f = 217 Hz to 2 kHz, VRIPPLE = 200 mVPP, inputs AC-grounded with CI = 2 µF 5
Supply ripple rejection ratio kSVR -74 dB C(BYPASS) = 0.47 µF, VDD = 2.5 V to 5.5 V, f = 40 Hz to 20 kHz, VRIPPLE = 200 mVPP, inputs AC-grounded with CI = 2 µF 5
Common-mode rejection ratio CMRR -85 dB VDD = 2.5 V to 5.5 V, f = 20 Hz to 1 kHz, resistor tolerance = 0.1%, gain = 4 V/V, VICM = 200 mVPP 5
Common-mode rejection ratio CMRR -74 dB f = 20 Hz to 20 kHz 5
Output impedance ZO 10 kΩ Shutdown mode 5
Signal-to-noise ratio SNR 104 dB VDD = 5 V, PO = 1 W 5
Output voltage noise Vn 17 VRMS f = 20 Hz to 20 kHz, no weighting 5
Output voltage noise Vn 13 VRMS f = 20 Hz to 20 kHz, A weighting 5
Input impedance ZI 2 MΩ 5
Shutdown attenuation -80 dB f = 20 Hz to 20 kHz, RF = RI = 20 kΩ 5
Junction-to-ambient thermal resistance RθJA 57.3 °C/W MSOP PowerPAD (DGN) column 4
Junction-to-case (top) thermal resistance RθJC(top) 84 °C/W MSOP PowerPAD (DGN) column 4
Junction-to-board thermal resistance RθJB 32.2 °C/W MSOP PowerPAD (DGN) column 4
Junction-to-case (bottom) thermal resistance RθJC(bot) 11.8 °C/W MSOP PowerPAD (DGN) column 4
Junction-to-top characterization parameter ψJT 3.7 °C/W MSOP PowerPAD (DGN) column 4
Junction-to-board characterization parameter ψJB 32.2 °C/W MSOP PowerPAD (DGN) column 4

CAD (KiCad official)

  • Symbol: TPA6205A1DGNR
  • Footprint: Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm
  • 3D model: MSOP-8-EP (KiCad packages3D, STEP)
  • 3D model files: tpa6205a1dgnr-etched.step / tpa6205a1dgnr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tpa6205a1dgnr.step / tpa6205a1dgnr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (46 pp, sha256 68a4c8173270bf87, retrieved 2026-09-24, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF