main
Ray
tpa6138a2pwr: specified limits as data (metadata.characteristics, 35 rows from the datasheet)
a3c9486
TPA6138A2PWR
Texas Instruments · Audio Amplifiers · TSSOP-14
TPA6138A2PWR from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +INR | input | Right-channel positive input; input voltage range VSS - 0.3 V to VDD + 0.3 V. |
| 2 | -INR | input | Right-channel negative input; input voltage range VSS - 0.3 V to VDD + 0.3 V. |
| 3 | OUTR | output | Right-channel output; provides 40 mW at 1% THD+N into 32 Ω with 3.3 V supply, output range ±3.05 V, minimum load 12.8 Ω. |
| 4 | GND | power_in | Ground reference. |
| 5 | Mute | input | Mute control, active-low; low level (0 to 40% VDD) mutes output, high level (60% VDD and above) enables output. |
| 6 | VSS | power_in | Supply voltage return; internal charge pump generates negative rail connected to this pin. |
| 7 | CN | bidirectional | Charge-pump flying capacitor negative connection; external capacitor value typically 1 µF for optimal performance. |
| 8 | CP | bidirectional | Charge-pump flying capacitor positive connection; external capacitor value typically 1 µF for optimal performance. |
| 9 | VDD | power_in | Positive supply voltage input; recommended operating range 3.0 V to 3.6 V. |
| 10 | GND | power_in | Ground reference. |
| 11 | UVP | input | Undervoltage protection input with internal pull-up; mutes output when voltage drops below threshold (typically 1.25 V via external resistor divider), unconnected if function unused. |
| 12 | OUTL | output | Left-channel output; provides 40 mW at 1% THD+N into 32 Ω with 3.3 V supply, output range ±3.05 V, minimum load 12.8 Ω. |
| 13 | -INL | input | Left-channel negative input; input voltage range VSS - 0.3 V to VDD + 0.3 V. |
| 14 | +INL | input | Left-channel positive input; input voltage range VSS - 0.3 V to VDD + 0.3 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD to GND | VDD | -0.3 | 4 | V | 4 | ||
| Mute to GND, UVP to GND | -0.3 | V | 4 | ||||
| Minimum load impedance – line outputs – OUTL, OUTR | 12.8 | Ω | 4 | ||||
| Maximum operating junction temperature range | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature range | Tstg | -40 | 150 | °C | 4 | ||
| Power supply DC supply voltage | VDD | 3 | 3.3 | 3.6 | V | 4 | |
| Load impedance | RL | 16 | 32 | Ω | 4 | ||
| Low-level input voltage Mute | VIL | 40 | %VDD | Mute | 4 | ||
| High-level input voltage Mute | VIH | 60 | %VDD | Mute | 4 | ||
| Ambient temperature | TA | -40 | 25 | 85 | °C | 4 | |
| Output offset voltage | /VOS/ | 0.5 | 1 | mV | VDD = 3.3 V | 5 | |
| High-level output voltage | VOH | 3.1 | V | VDD = 3.3 V | 5 | ||
| Low-level output voltage | VOL | -3.05 | V | VDD = 3.3 V | 5 | ||
| Charge-pump switching frequency | fCP | 200 | 300 | 400 | kHz | 5 | |
| High-level input current, Mute | /IIH/ | 1 | µA | VDD = 3.3 V, VIH = VDD | 5 | ||
| Low-level input current, Mute | /IIL/ | 1 | µA | VDD = 3.3 V, VIL = 0 V | 5 | ||
| Supply current | IDD | 5 | 14 | 25 | mA | VDD = 3.3 V, no load, Mute = VDD | 5 |
| Total harmonic distortion plus noise | THD+N | 0.01 | % | VDD = 3.3V, f = 1kHz, RLD = 32Ω, Po = 10mW | 5 | ||
| Signal-to-noise ratio | SNR | 90 | 96 | dB | A-weighted | 5 | |
| Dynamic range | DNR | 90 | 100 | dB | A-weighted | 5 | |
| Power-supply rejection ratio | PSRR | 80 | dB | 5 | |||
| External UVP detect voltage | VUVP_EX | 1.25 | V | 5 | |||
| External UVP detect hysteresis current | VUVP_EX_HYSTERESIS | 5 | µA | 5 | |||
| Supply current, disabled | IDD | 14 | mA | VDD = 3.3 V, no load, Mute = GND, disabled | 5 | ||
| Output power, outputs in phase | PO | 40 | mW | THD+N = 1%, VDD = 3.3 V, f = 1 kHz, RL = 32 Ω | 5 | ||
| Noise voltage | VN | 13 | μV | A-weighted | 5 | ||
| Output impedance when muted | ZO | 110 | mΩ | Mute = GND | 5 | ||
| Input-to-output attenuation when muted | 80 | dB | Mute = GND | 5 | |||
| Crosstalk—L to R, R to L | -75 | dB | Po = 20 mW | 5 | |||
| Current limit | ILIMIT | 50 | mA | PVDD = 3.3 V | 5 | ||
| Junction-to-ambient thermal resistance | RθJA | 130 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 49 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 63 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ψJT | 3.6 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ψJB | 62 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
TPA6138A2PWR - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
tpa6138a2pwr-etched.step/tpa6138a2pwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tpa6138a2pwr.step/tpa6138a2pwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (23 pp, sha256
96f43a5f6b6aa3ba, retrieved 2026-09-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TPA6138A2PWR
**Texas Instruments** · Audio Amplifiers · TSSOP-14
TPA6138A2PWR from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +INR | input | Right-channel positive input; input voltage range VSS - 0.3 V to VDD + 0.3 V. |
| 2 | -INR | input | Right-channel negative input; input voltage range VSS - 0.3 V to VDD + 0.3 V. |
| 3 | OUTR | output | Right-channel output; provides 40 mW at 1% THD+N into 32 Ω with 3.3 V supply, output range ±3.05 V, minimum load 12.8 Ω. |
| 4 | GND | power_in | Ground reference. |
| 5 | Mute | input | Mute control, active-low; low level (0 to 40% VDD) mutes output, high level (60% VDD and above) enables output. |
| 6 | VSS | power_in | Supply voltage return; internal charge pump generates negative rail connected to this pin. |
| 7 | CN | bidirectional | Charge-pump flying capacitor negative connection; external capacitor value typically 1 µF for optimal performance. |
| 8 | CP | bidirectional | Charge-pump flying capacitor positive connection; external capacitor value typically 1 µF for optimal performance. |
| 9 | VDD | power_in | Positive supply voltage input; recommended operating range 3.0 V to 3.6 V. |
| 10 | GND | power_in | Ground reference. |
| 11 | UVP | input | Undervoltage protection input with internal pull-up; mutes output when voltage drops below threshold (typically 1.25 V via external resistor divider), unconnected if function unused. |
| 12 | OUTL | output | Left-channel output; provides 40 mW at 1% THD+N into 32 Ω with 3.3 V supply, output range ±3.05 V, minimum load 12.8 Ω. |
| 13 | -INL | input | Left-channel negative input; input voltage range VSS - 0.3 V to VDD + 0.3 V. |
| 14 | +INL | input | Left-channel positive input; input voltage range VSS - 0.3 V to VDD + 0.3 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD to GND | VDD | -0.3 | | 4 | V | | 4 |
| Mute to GND, UVP to GND | | -0.3 | | | V | | 4 |
| Minimum load impedance – line outputs – OUTL, OUTR | | 12.8 | | | Ω | | 4 |
| Maximum operating junction temperature range | TJ | -40 | | 150 | °C | | 4 |
| Storage temperature range | Tstg | -40 | | 150 | °C | | 4 |
| Power supply DC supply voltage | VDD | 3 | 3.3 | 3.6 | V | | 4 |
| Load impedance | RL | 16 | 32 | | Ω | | 4 |
| Low-level input voltage Mute | VIL | | | 40 | %VDD | Mute | 4 |
| High-level input voltage Mute | VIH | 60 | | | %VDD | Mute | 4 |
| Ambient temperature | TA | -40 | 25 | 85 | °C | | 4 |
| Output offset voltage | /VOS/ | | 0.5 | 1 | mV | VDD = 3.3 V | 5 |
| High-level output voltage | VOH | 3.1 | | | V | VDD = 3.3 V | 5 |
| Low-level output voltage | VOL | | | -3.05 | V | VDD = 3.3 V | 5 |
| Charge-pump switching frequency | fCP | 200 | 300 | 400 | kHz | | 5 |
| High-level input current, Mute | /IIH/ | | | 1 | µA | VDD = 3.3 V, VIH = VDD | 5 |
| Low-level input current, Mute | /IIL/ | | | 1 | µA | VDD = 3.3 V, VIL = 0 V | 5 |
| Supply current | IDD | 5 | 14 | 25 | mA | VDD = 3.3 V, no load, Mute = VDD | 5 |
| Total harmonic distortion plus noise | THD+N | | | 0.01 | % | VDD = 3.3V, f = 1kHz, RLD = 32Ω, Po = 10mW | 5 |
| Signal-to-noise ratio | SNR | 90 | 96 | | dB | A-weighted | 5 |
| Dynamic range | DNR | 90 | 100 | | dB | A-weighted | 5 |
| Power-supply rejection ratio | PSRR | | 80 | | dB | | 5 |
| External UVP detect voltage | VUVP_EX | | 1.25 | | V | | 5 |
| External UVP detect hysteresis current | VUVP_EX_HYSTERESIS | | 5 | | µA | | 5 |
| Supply current, disabled | IDD | | 14 | | mA | VDD = 3.3 V, no load, Mute = GND, disabled | 5 |
| Output power, outputs in phase | PO | | 40 | | mW | THD+N = 1%, VDD = 3.3 V, f = 1 kHz, RL = 32 Ω | 5 |
| Noise voltage | VN | | 13 | | μV | A-weighted | 5 |
| Output impedance when muted | ZO | | 110 | | mΩ | Mute = GND | 5 |
| Input-to-output attenuation when muted | | | 80 | | dB | Mute = GND | 5 |
| Crosstalk—L to R, R to L | | | -75 | | dB | Po = 20 mW | 5 |
| Current limit | ILIMIT | | 50 | | mA | PVDD = 3.3 V | 5 |
| Junction-to-ambient thermal resistance | RθJA | | 130 | | °C/W | | 4 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 49 | | °C/W | | 4 |
| Junction-to-board thermal resistance | RθJB | | 63 | | °C/W | | 4 |
| Junction-to-top characterization parameter | ψJT | | 3.6 | | °C/W | | 4 |
| Junction-to-board characterization parameter | ψJB | | 62 | | °C/W | | 4 |
## CAD (KiCad official)
- Symbol: `TPA6138A2PWR`
- Footprint: `Package_SO:TSSOP-14_4.4x5mm_P0.65mm`
- 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files: `tpa6138a2pwr-etched.step` / `tpa6138a2pwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tpa6138a2pwr.step` / `tpa6138a2pwr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tpa6138a2.pdf) (23 pp, sha256 `96f43a5f6b6aa3ba`, retrieved 2026-09-23, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tpa6138a2pwr-datasheet.pdf)