main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tpa6138a2pwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tpa6138a2pwr: viewers · Ray
package.json tpa6138a2pwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tpa6138a2pwr: specified limits as data (metadata.characteristics, 35 rows from the datasheet) · Ray
README.md tpa6138a2pwr: specified limits as data (metadata.characteristics, 35 rows from the datasheet) · Ray
tpa6138a2pwr-etched.fit.json tpa6138a2pwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tpa6138a2pwr-etched.glb tpa6138a2pwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tpa6138a2pwr-etched.step tpa6138a2pwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tpa6138a2pwr.glb Publish 0.1.0 · Ray
tpa6138a2pwr.kicad_mod Publish 0.1.0 · Ray
tpa6138a2pwr.kicad_sym Publish 0.1.0 · Ray
tpa6138a2pwr.lbr Publish 0.1.0 · Ray
tpa6138a2pwr.step Publish 0.1.0 · Ray

TPA6138A2PWR

Texas Instruments · Audio Amplifiers · TSSOP-14

TPA6138A2PWR from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 +INR input Right-channel positive input; input voltage range VSS - 0.3 V to VDD + 0.3 V.
2 -INR input Right-channel negative input; input voltage range VSS - 0.3 V to VDD + 0.3 V.
3 OUTR output Right-channel output; provides 40 mW at 1% THD+N into 32 Ω with 3.3 V supply, output range ±3.05 V, minimum load 12.8 Ω.
4 GND power_in Ground reference.
5 Mute input Mute control, active-low; low level (0 to 40% VDD) mutes output, high level (60% VDD and above) enables output.
6 VSS power_in Supply voltage return; internal charge pump generates negative rail connected to this pin.
7 CN bidirectional Charge-pump flying capacitor negative connection; external capacitor value typically 1 µF for optimal performance.
8 CP bidirectional Charge-pump flying capacitor positive connection; external capacitor value typically 1 µF for optimal performance.
9 VDD power_in Positive supply voltage input; recommended operating range 3.0 V to 3.6 V.
10 GND power_in Ground reference.
11 UVP input Undervoltage protection input with internal pull-up; mutes output when voltage drops below threshold (typically 1.25 V via external resistor divider), unconnected if function unused.
12 OUTL output Left-channel output; provides 40 mW at 1% THD+N into 32 Ω with 3.3 V supply, output range ±3.05 V, minimum load 12.8 Ω.
13 -INL input Left-channel negative input; input voltage range VSS - 0.3 V to VDD + 0.3 V.
14 +INL input Left-channel positive input; input voltage range VSS - 0.3 V to VDD + 0.3 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-14
Category Amplifiers/Comparators
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDD to GND VDD -0.3 4 V 4
Mute to GND, UVP to GND -0.3 V 4
Minimum load impedance – line outputs – OUTL, OUTR 12.8 Ω 4
Maximum operating junction temperature range TJ -40 150 °C 4
Storage temperature range Tstg -40 150 °C 4
Power supply DC supply voltage VDD 3 3.3 3.6 V 4
Load impedance RL 16 32 Ω 4
Low-level input voltage Mute VIL 40 %VDD Mute 4
High-level input voltage Mute VIH 60 %VDD Mute 4
Ambient temperature TA -40 25 85 °C 4
Output offset voltage /VOS/ 0.5 1 mV VDD = 3.3 V 5
High-level output voltage VOH 3.1 V VDD = 3.3 V 5
Low-level output voltage VOL -3.05 V VDD = 3.3 V 5
Charge-pump switching frequency fCP 200 300 400 kHz 5
High-level input current, Mute /IIH/ 1 µA VDD = 3.3 V, VIH = VDD 5
Low-level input current, Mute /IIL/ 1 µA VDD = 3.3 V, VIL = 0 V 5
Supply current IDD 5 14 25 mA VDD = 3.3 V, no load, Mute = VDD 5
Total harmonic distortion plus noise THD+N 0.01 % VDD = 3.3V, f = 1kHz, RLD = 32Ω, Po = 10mW 5
Signal-to-noise ratio SNR 90 96 dB A-weighted 5
Dynamic range DNR 90 100 dB A-weighted 5
Power-supply rejection ratio PSRR 80 dB 5
External UVP detect voltage VUVP_EX 1.25 V 5
External UVP detect hysteresis current VUVP_EX_HYSTERESIS 5 µA 5
Supply current, disabled IDD 14 mA VDD = 3.3 V, no load, Mute = GND, disabled 5
Output power, outputs in phase PO 40 mW THD+N = 1%, VDD = 3.3 V, f = 1 kHz, RL = 32 Ω 5
Noise voltage VN 13 μV A-weighted 5
Output impedance when muted ZO 110 mΩ Mute = GND 5
Input-to-output attenuation when muted 80 dB Mute = GND 5
Crosstalk—L to R, R to L -75 dB Po = 20 mW 5
Current limit ILIMIT 50 mA PVDD = 3.3 V 5
Junction-to-ambient thermal resistance RθJA 130 °C/W 4
Junction-to-case (top) thermal resistance RθJC(top) 49 °C/W 4
Junction-to-board thermal resistance RθJB 63 °C/W 4
Junction-to-top characterization parameter ψJT 3.6 °C/W 4
Junction-to-board characterization parameter ψJB 62 °C/W 4

CAD (KiCad official)

  • Symbol: TPA6138A2PWR
  • Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
  • 3D model: TSSOP-14 (KiCad packages3D, STEP)
  • 3D model files: tpa6138a2pwr-etched.step / tpa6138a2pwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tpa6138a2pwr.step / tpa6138a2pwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (23 pp, sha256 96f43a5f6b6aa3ba, retrieved 2026-09-23, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF