main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tpa3138d2pwpr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tpa3138d2pwpr: viewers · Ray
package.json tpa3138d2pwpr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tpa3138d2pwpr: specified limits as data (metadata.characteristics, 59 rows from the datasheet) · Ray
README.md tpa3138d2pwpr: specified limits as data (metadata.characteristics, 59 rows from the datasheet) · Ray
tpa3138d2pwpr-etched.fit.json tpa3138d2pwpr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tpa3138d2pwpr-etched.glb tpa3138d2pwpr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tpa3138d2pwpr-etched.step tpa3138d2pwpr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tpa3138d2pwpr.glb Publish 0.1.0 · Ray
tpa3138d2pwpr.kicad_mod Publish 0.1.0 · Ray
tpa3138d2pwpr.kicad_sym Publish 0.1.0 · Ray
tpa3138d2pwpr.lbr Publish 0.1.0 · Ray
tpa3138d2pwpr.step Publish 0.1.0 · Ray

TPA3138D2PWPR

Texas Instruments · Audio Amplifiers · TSSOP-28-EP

TPA3138D2PWPR from Texas Instruments, in a TSSOP-28-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No Connect Pin; can be shorted to PVCC, shorted to GND, or left open.
2 SD/FAULT bidirectional Shutdown control and fault reporting output with TTL logic compliance to AVCC; LOW disables outputs to Hi-Z and enters low-current shutdown state, HIGH enables normal operation and reports Over-Temp, Over-Current, DC Detect faults with auto-recovery.
3 LINP input Positive audio input for left channel, biased at 2.5 V; connect to GND for PBTL mode operation.
4 LINN input Negative audio input for left channel, biased at 2.5 V; connect to GND for PBTL mode operation.
5 GAIN_SEL input Gain select least significant bit with TTL logic compliance to AVDD; LOW sets 20 dB gain, HIGH sets 26 dB gain, floating defaults to 26 dB gain.
6 MODE_SEL input Mode select least significant bit with TTL logic compliance to AVDD; LOW sets BD Mode with 7.5 V UVP threshold, HIGH or floating sets 1SPW mode with 3.4 V UVP threshold.
7 AVCC power_in Analog power supply, 3.5 V to 14.4 V; add 1 μF decoupling capacitor to ground.
8 GND power_in Analog signal ground.
9 GVDD power_out FET gate drive supply output with nominal 5 V; add 1 μF capacitor to ground at this pin.
10 PLIMIT input Power limiter level control input; connect resistor divider from GVDD to GND to set power limit, or connect directly to GVDD for no power limiting.
11 RINN input Negative audio input for right channel, biased at 2.5 V.
12 RINP input Positive audio input for right channel, biased at 2.5 V.
13 NC unconnected No Connect Pin; can be shorted to PVCC, shorted to GND, or left open.
14 AGND power_in Analog signal ground; must be connected to the thermal pad for best thermal and electrical performance.
15 PVCCR power_in Power supply for right channel H-bridge, 3.5 V to 14.4 V; internally connected with left channel PVCC.
16 PVCCR power_in Power supply for right channel H-bridge, 3.5 V to 14.4 V; internally connected with left channel PVCC.
17 BSPR power_in Bootstrap supply for right channel positive high-side FET; connect 0.22 μF capacitor from OUTPR to BSPR.
18 OUTPR output Class-D H-bridge positive output for right channel.
19 GND power_in Power ground for the H-bridges.
20 OUTNR output Class-D H-bridge negative output for right channel.
21 BSNR power_in Bootstrap supply for right channel negative high-side FET; connect 0.22 μF capacitor from OUTNR to BSNR.
22 BSNL power_in Bootstrap supply for left channel negative high-side FET; connect 0.22 μF capacitor from OUTNL to BSNL.
23 OUTNL output Class-D H-bridge negative output for left channel.
24 GND power_in Power ground for the H-bridges.
25 OUTPL output Class-D H-bridge positive output for left channel.
26 BSPL power_in Bootstrap supply for left channel positive high-side FET; connect 0.22 μF capacitor from OUTPL to BSPL.
27 PVCCL power_in Power supply for left channel H-bridge, 3.5 V to 14.4 V; internally connected with right channel PVCC.
28 PVCCL power_in Power supply for left channel H-bridge, 3.5 V to 14.4 V; internally connected with right channel PVCC.
29 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-28-EP
Category Amplifiers/Comparators
Pins 29

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage AVCC to GND, PVCC to GND -0.3 20 V 5
Input current, to any pin except supply pins 10 mA 5
Interface pin voltage, SD/FAULT to GND, GAIN_SEL, MODE_SEL (printed max AVCC + 0.3 V) -0.3 V 5
Voltage slew rate, SD/FAULT (footnote 2) 10 V/ms 5
PLIMIT pin voltage (printed max GVDD + 0.3 V) -0.3 V 5
RINN, RINP, LINN, LINP input voltage -0.3 5.5 V 5
Minimum load resistance, BTL RL 4.8 Ω 10 V < PVCC < 14.4 V 5
Minimum load resistance, BTL RL 3.2 Ω 3.5 V < PVCC < 10 V 5
Minimum load resistance, PBTL RL 2.4 Ω 10 V < PVCC < 14.4 V 5
Minimum load resistance, PBTL RL 1.6 Ω 3.5 V < PVCC < 10 V 5
Operating junction temperature range TJ -25 150 °C 5
Storage temperature range Tstg -40 125 °C 5
Supply voltage PVCC, AVCC VCC 3.5 14.4 V 6
High-level input voltage (printed max AVCC) VIH 2 V SD/FAULT (1), GAIN_SEL, MODE_SEL 6
Low-level input voltage VIL 0.8 V SD/FAULT, GAIN_SEL, MODE_SEL (2) 6
Low-level output voltage VOL 0.8 V SD/FAULT, RPULL-UP = 100 kΩ, PVCC = 14.4 V 6
High-level input current IIH 50 µA SD/FAULT, GAIN_SEL, MODE_SEL, VI = 2 V, AVCC = 12 V 6
Low-level input current IIL 5 µA SD/FAULT, GAIN_SEL, MODE_SEL, VI = 0.8 V, AVCC = 12 V 6
Operating free-air temperature TA -10 85 °C 6
Operating junction temperature TJ -10 150 °C 6
Gain G 19 20 21 dB GAIN_SEL = 0.8 V 7
Gain G 25 26 27 dB GAIN_SEL = 2 V 7
Oscillator frequency, spread spectrum ON fOSC, SS 305 340 kHz Spread spectrum ON 7
Gate drive supply 4.8 5 5.2 V IGVDD = 2 mA 7
Over-temperature trip point tolerance, device to device -15 15 °C Device to device 14
Power supply ripple rejection PSRR -70 dB 200-mVPP ripple at 1 kHz, Gain = 26 dB, Inputs ac-coupled to GND 7
Continuous output power, BTL PO 10 W BTL, THD+N = 1%, f = 1 kHz, PVCC = 12 V, RL = 6 Ω 7
Continuous output power, BTL PO 12 W BTL, THD+N = 10%, f = 1 kHz, PVCC = 12 V, RL = 6 Ω 7
Continuous output power, BTL PO 8 W BTL, THD+N = 1%, f = 1 kHz, PVCC = 12 V, RL = 8 Ω 7
Continuous output power, BTL PO 9.9 W BTL, THD+N = 10%, f = 1 kHz, PVCC = 12 V, RL = 8 Ω 7
Continuous output power, PBTL (mono) PO 18.5 W PBTL, THD+N = 10%, f = 1 kHz, PVCC = 12 V, RL = 4 Ω 7
Maximum output current IO 3.5 A f = 1 kHz, RL = 3 Ω 7
Total harmonic distortion + noise THD+N 0.04 % f = 1 kHz, PO = 5 W (half-power) 7
Output integrated noise Vn 85 µV 20 Hz to 22 kHz, A-weighted filter, Gain = 26 dB 7
Output integrated noise Vn -81 dBV 20 Hz to 22 kHz, A-weighted filter, Gain = 26 dB 7
Output integrated noise Vn 72 µV 20 Hz to 22 kHz, A-weighted filter, Gain = 20 dB 7
Output integrated noise Vn -82.6 dBV 20 Hz to 22 kHz, A-weighted filter, Gain = 20 dB 7
Crosstalk -95 dB VO = 1 Vrms, Gain = 26 dB, f = 1 kHz 7
Signal-to-noise ratio SNR 102 dB Maximum output at THD+N < 1%, f = 1 kHz, Gain = 26 dB, A-weighted 7
Thermal trip point OTE 150 °C 7
Thermal hysteresis 15 °C 7
Output offset voltage (measured differentially) /VOS/ 1.5 mV VI = 0 V, Gain = 26 dB 7
Quiescent supply current, 1SPW mode ICC 20 mA SD/FAULT = 2 V, 10 µF + 680 nF output filter, 1SPW Mode, PVCC = 12 V 7
Quiescent supply current, BD mode ICC 37 mA SD/FAULT = 2 V, 10 µF + 680 nF output filter, BD Mode, PVCC = 12 V 7
Quiescent supply current in shutdown mode ICC(SD) 10 µA SD/FAULT = 0.8 V, no load 7
Drain-source on-state resistance, high side rDS(on) 180 mΩ IO = 500 mA, TJ = 25°C, excluding metal and bond wire resistance 7
Drain-source on-state resistance, low side rDS(on) 180 mΩ IO = 500 mA, TJ = 25°C, excluding metal and bond wire resistance 7
Turn-on time tON 50 ms SD/FAULT = 2 V 7
Turn-off time tOFF 2.9 µs SD/FAULT = 0.8 V 7
DC detect time tDCDET 800 ms VRINP = 2.6 V and VRINN = 2.4 V, or VRINP = 2.4 V and VRINN = 2.6 V 7
Over voltage protection OVP 15.8 V 7
Under voltage protection, BD mode UVP 7.5 V MODE_SEL = 0.8 V (BD mode) 7
Under voltage protection, 1SPW mode UVP 3.4 V MODE_SEL = 2 V, or floating (1SPW mode) 7
Junction-to-ambient thermal resistance RθJA 30.3 °C/W PWP (HTSSOP) 28 pins 6
Junction-to-case (top) thermal resistance RθJC(top) 33.5 °C/W PWP (HTSSOP) 28 pins 6
Junction-to-board thermal resistance RθJB 17.5 °C/W PWP (HTSSOP) 28 pins 6
Junction-to-top characterization parameter ψJT 0.9 °C/W PWP (HTSSOP) 28 pins 6
Junction-to-board characterization parameter ψJB 7.2 °C/W PWP (HTSSOP) 28 pins 6
Junction-to-case (bottom) thermal resistance RθJC(bot) 0.9 °C/W PWP (HTSSOP) 28 pins 6

CAD (KiCad official)

  • Symbol: TPA3138D2PWPR
  • Footprint: Package_SO:TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.85x6.7mm
  • 3D model: TSSOP-28-EP (KiCad packages3D, STEP)
  • 3D model files: tpa3138d2pwpr-etched.step / tpa3138d2pwpr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tpa3138d2pwpr.step / tpa3138d2pwpr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (37 pp, sha256 281fbddb49687ce9, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF