component
TP6033ELX
Public Made by Adomby adom
Shenzhen JingYang Power Distribution Switches, SOT23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
TP6033ELX
Shenzhen JingYang · Power Distribution Switches · SOT23-5
TP6033ELX from Shenzhen JingYang, in a SOT23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Switch output, the source of the output P-channel MOSFET; typically connected to the switched side of the load and must be connected together to the load. |
| 2 | GND | power_in | Ground pin, to be connected to a strong ground plane that also serves as the heat sink for the device. |
| 3 | ILIM | passive | External resistor pin that sets the current-limit threshold, with a recommended 1% RILIM between 1kΩ and 30kΩ and ILIM = 6800/RILIM. |
| 4 | nEN | input | Active-low logic enable input that must be driven logic high or logic low and must never be left floating. |
| 5 | IN | power_in | Input supply and drain of the output MOSFET, which also powers the internal circuitry; operates from 2.5V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shenzhen JingYang |
| Package | SOT23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | VIN | 2.5 | 5.5 | V | 4 | ||
| Supply current, Enable | IIN_ON | 30 | 60 | μA | VIN=5.5V, No load on OUT | 4 | |
| Reverse leakage current | IREV | 2 | 5 | μA | VOUT=5.5V, VIN=0V | 4 | |
| EN input current | InEN | -0.5 | 5 | 10 | μA | VEN=5.5V or 0V | 4 |
| Over Current CC Regulation | IOC | 0.8 | 1 | 1.2 | A | RILIM=6.8kΩ, VIN=5V, VOUT=3.5V | 4 |
| Reverse voltage protection | VREVERSE | 5 | 20 | 50 | mV | VOUT-VIN | 4 |
| Input voltage (absolute maximum) | -0.3 | 7 | V | Input Supply Voltage | 2 | ||
| All other pins voltages | -0.3 | V | Upper limit printed as VIN+0.3 V | 2 | |||
| Junction temperature (absolute maximum) | -40 | 160 | °C | Note 2 | 2 | ||
| Storage temperature range | -65 | 150 | °C | 2 | |||
| Lead temperature (soldering) | 260 | °C | Soldering, 10s | 2 | |||
| ESD Human Body Model | VESD | -2000 | 2000 | V | Human Body Model for all pins, JEDEC JS-001 | 3 | |
| Voltage range IN (recommended) | 2.5 | 5.5 | V | 3 | |||
| TJ operating junction temperature range | TJ | -40 | 125 | °C | 3 | ||
| Junction-to-ambient thermal resistance | 260 | °C/W | Junction-to-ambient; value placed in typ (column unlabeled) | 2 | |||
| Junction-to-case thermal resistance | 120 | °C/W | Junction-to-case; value placed in typ (column unlabeled) | 2 | |||
| Output rise time | TRISE | 0.1 | ms | CL=1uF, RL=100ohm | 4 | ||
| Power switch on-resistance | RDS_ON | 60 | mΩ | IOUT=1A | 4 | ||
| Thermal shutdown temperature | TNORMAL | 150 | °C | 4 | |||
| Thermal shutdown threshold hysteresis | TNORMAL_HY | 20 | °C | 4 |
CAD (KiCad official)
- Symbol:
TP6033ELX - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT23-5 (KiCad packages3D, STEP)
- 3D model files:
tp6033elx-etched.step/tp6033elx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tp6033elx.step/tp6033elx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shenzhen JingYang datasheet (11 pp, sha256
897363921f8637be, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TP6033ELX
**Shenzhen JingYang** · Power Distribution Switches · SOT23-5
TP6033ELX from Shenzhen JingYang, in a SOT23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Switch output, the source of the output P-channel MOSFET; typically connected to the switched side of the load and must be connected together to the load. |
| 2 | GND | power_in | Ground pin, to be connected to a strong ground plane that also serves as the heat sink for the device. |
| 3 | ILIM | passive | External resistor pin that sets the current-limit threshold, with a recommended 1% RILIM between 1kΩ and 30kΩ and ILIM = 6800/RILIM. |
| 4 | nEN | input | Active-low logic enable input that must be driven logic high or logic low and must never be left floating. |
| 5 | IN | power_in | Input supply and drain of the output MOSFET, which also powers the internal circuitry; operates from 2.5V to 5.5V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shenzhen JingYang |
| Package | SOT23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | VIN | 2.5 | | 5.5 | V | | 4 |
| Supply current, Enable | IIN_ON | | 30 | 60 | μA | VIN=5.5V, No load on OUT | 4 |
| Reverse leakage current | IREV | | 2 | 5 | μA | VOUT=5.5V, VIN=0V | 4 |
| EN input current | InEN | -0.5 | 5 | 10 | μA | VEN=5.5V or 0V | 4 |
| Over Current CC Regulation | IOC | 0.8 | 1 | 1.2 | A | RILIM=6.8kΩ, VIN=5V, VOUT=3.5V | 4 |
| Reverse voltage protection | VREVERSE | 5 | 20 | 50 | mV | VOUT-VIN | 4 |
| Input voltage (absolute maximum) | | -0.3 | | 7 | V | Input Supply Voltage | 2 |
| All other pins voltages | | -0.3 | | | V | Upper limit printed as VIN+0.3 V | 2 |
| Junction temperature (absolute maximum) | | -40 | | 160 | °C | Note 2 | 2 |
| Storage temperature range | | -65 | | 150 | °C | | 2 |
| Lead temperature (soldering) | | | | 260 | °C | Soldering, 10s | 2 |
| ESD Human Body Model | VESD | -2000 | | 2000 | V | Human Body Model for all pins, JEDEC JS-001 | 3 |
| Voltage range IN (recommended) | | 2.5 | | 5.5 | V | | 3 |
| TJ operating junction temperature range | TJ | -40 | | 125 | °C | | 3 |
| Junction-to-ambient thermal resistance | | | 260 | | °C/W | Junction-to-ambient; value placed in typ (column unlabeled) | 2 |
| Junction-to-case thermal resistance | | | 120 | | °C/W | Junction-to-case; value placed in typ (column unlabeled) | 2 |
| Output rise time | TRISE | | 0.1 | | ms | CL=1uF, RL=100ohm | 4 |
| Power switch on-resistance | RDS_ON | | 60 | | mΩ | IOUT=1A | 4 |
| Thermal shutdown temperature | TNORMAL | | 150 | | °C | | 4 |
| Thermal shutdown threshold hysteresis | TNORMAL_HY | | 20 | | °C | | 4 |
## CAD (KiCad official)
- Symbol: `TP6033ELX`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT23-5 (KiCad packages3D, STEP)
- 3D model files: `tp6033elx-etched.step` / `tp6033elx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tp6033elx.step` / `tp6033elx.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Shenzhen JingYang datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603151361240276992) (11 pp, sha256 `897363921f8637be`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tp6033elx-datasheet.pdf)