main
Ray Publish 0.1.0 926c036

TMS5700232BPZQQ1

Texas Instruments · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-100(14x14)

TMS5700232BPZQQ1 from Texas Instruments, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GIOA[0]/SPI3nCS[3] bidirectional General-purpose I/O GIOA[0] with a programmable pulldown of 20 µA that can generate CPU interrupts on rising, falling or both edges, and that can alternatively carry SPI3nCS[3].
2 GIOA[1]/SPI3nCS[2] bidirectional General-purpose I/O GIOA[1] with a programmable pulldown of 20 µA that can generate CPU interrupts on rising, falling or both edges, and that can alternatively carry SPI3nCS[2].
3 FLTP1 input Flash test pin that must connect only to a test pad or be left unconnected, and must not be exposed to ESD in the final product.
4 FLTP2 input Flash test pin that must connect only to a test pad or be left unconnected, and must not be exposed to ESD in the final product.
5 GIOA[2]/SPI3nCS[1] bidirectional General-purpose I/O GIOA[2] with a programmable pulldown of 20 µA that can generate CPU interrupts on rising, falling or both edges, and that can alternatively carry SPI3nCS[1].
6 VCCIO power_in I/O supply, 3.3 V nominal, with a recommended operating range of 3.0 V to 3.6 V.
7 VSS power_in Device ground reference for the core and I/O supplies.
8 GIOA[3]/SPI2nCS[3] bidirectional General-purpose I/O GIOA[3] that can generate CPU interrupts on rising, falling or both edges, and that can alternatively carry SPI2nCS[3].
9 GIOA[4]/SPI2nCS[2] bidirectional General-purpose I/O GIOA[4] that can generate CPU interrupts on rising, falling or both edges, and that can alternatively carry SPI2nCS[2].
10 GIOA[5]/EXTCLKIN bidirectional General-purpose I/O GIOA[5] that can alternatively serve as the external clock input EXTCLKIN.
11 N2HET[22] bidirectional N2HET timer input capture or output compare channel 22, which can be programmed as GPIO and has a programmable suppression filter.
12 GIOA[6]/SPI2nCS[1]/N2HET[31] bidirectional General-purpose I/O GIOA[6] that can alternatively carry SPI2nCS[1] or N2HET[31].
13 VCC power_in Digital logic and RAM core supply, 1.2 V nominal, with a recommended operating range of 1.14 V to 1.32 V.
14 OSCIN input Main oscillator input from an external crystal or resonator, or an external clock input.
15 KELVIN_GND power_in Dedicated ground for the oscillator that should not be connected to any other ground.
16 OSCOUT output Main oscillator output to an external crystal or resonator, left open when an external clock drives OSCIN.
17 VSS power_in Listed as a device ground; the datasheet footnote states that this pin is the ADC supply ground reference, which is an exception to the common ground.
18 GIOA[7]/N2HET[29] bidirectional General-purpose I/O GIOA[7] that can generate CPU interrupts on rising, falling or both edges, and that can alternatively carry N2HET[29].
19 N2HET[0] bidirectional N2HET timer input capture or output compare channel 0, with a programmable suppression filter and a 20 µA pulldown.
20 VSS power_in Device ground reference for the core and I/O supplies.
21 VCC power_in Digital logic and RAM core supply, 1.2 V nominal, with a recommended operating range of 1.14 V to 1.32 V.
22 N2HET[2] bidirectional N2HET timer input capture or output compare channel 2, with a programmable suppression filter and a 20 µA pulldown.
23 SPI2nCS[0] bidirectional SPI2 chip select 0, which can alternatively be configured as GPIO.
24 TEST bidirectional Test enable that must be connected directly to ground or through a pulldown resistor.
25 N2HET[4] bidirectional N2HET timer input capture or output compare channel 4, with a programmable suppression filter and a 20 µA pulldown.
26 N2HET[6] bidirectional N2HET timer input capture or output compare channel 6, with a programmable suppression filter and a 20 µA pulldown.
27 MIBSPI1nCS[2] bidirectional MibSPI1 chip select 2 that can alternatively carry N2HET[20] or N2HET[19], or be configured as GPIO.
28 VCCIO power_in I/O supply, 3.3 V nominal, with a recommended operating range of 3.0 V to 3.6 V.
29 VSS power_in Device ground reference for the core and I/O supplies.
30 VCC power_in Digital logic and RAM core supply, 1.2 V nominal, with a recommended operating range of 1.14 V to 1.32 V.
31 nPORRST input Power-on reset input that external power supply monitor circuitry must drive low when any supply is out of range, with a glitch filter of 475 ns to 2000 ns and an internal 100 µA pulldown.
32 VCC power_in Digital logic and RAM core supply, 1.2 V nominal, with a recommended operating range of 1.14 V to 1.32 V.
33 VSS power_in Device ground reference for the core and I/O supplies.
34 SPI3SOMI bidirectional SPI3 slave-out master-in signal, which can alternatively be configured as GPIO.
35 SPI3SIMO bidirectional SPI3 slave-in master-out signal, which can alternatively be configured as GPIO.
36 SPI3CLK/EQEPA bidirectional SPI3 serial clock that can alternatively carry the eQEP input A, with a programmable pullup of 20 µA.
37 SPI3nENA/EQEPB bidirectional SPI3 enable that can alternatively carry the eQEP input B.
38 SPI3nCS[0]/EQEPI bidirectional SPI3 chip select 0 that can alternatively carry the eQEP index input.
39 MIBSPI1nCS[3]/N2HET[26] bidirectional MibSPI1 chip select 3 that can alternatively carry N2HET[26], or be configured as GPIO.
40 ADIN[16] passive MibADC analog input channel 16.
41 ADIN[17] passive MibADC analog input channel 17.
42 ADIN[0] passive MibADC analog input channel 0.
43 ADIN[7] passive MibADC analog input channel 7.
44 ADIN[20] passive MibADC analog input channel 20.
45 ADIN[21] passive MibADC analog input channel 21.
46 VCCAD/ADREFHI power_in MibADC operating supply, 3.3 V nominal, with a recommended operating range of 3.0 V to 3.6 V, also serving as the ADC high voltage reference.
47 VSSAD/ADREFLO power_in MibADC supply ground and ADC low voltage reference, with a recommended range of -0.1 V to 0.1 V.
48 ADIN[9] passive MibADC analog input channel 9.
49 ADIN[1] passive MibADC analog input channel 1.
50 ADIN[10] passive MibADC analog input channel 10.
51 ADIN[2] passive MibADC analog input channel 2.
52 ADIN[3] passive MibADC analog input channel 3.
53 ADIN[11] passive MibADC analog input channel 11.
54 ADIN[4] passive MibADC analog input channel 4.
55 ADIN[5] passive MibADC analog input channel 5.
56 ADIN[6] passive MibADC analog input channel 6.
57 ADIN[8] passive MibADC analog input channel 8.
58 ADEVT/N2HET[28] bidirectional MibADC external event trigger that can alternatively carry N2HET[28] or be configured as GPIO, with a programmable 20 µA pullup.
59 VSS power_in Device ground reference for the core and I/O supplies.
60 VCCIO power_in I/O supply, 3.3 V nominal, with a recommended operating range of 3.0 V to 3.6 V.
61 VCC power_in Digital logic and RAM core supply, 1.2 V nominal, with a recommended operating range of 1.14 V to 1.32 V.
62 CAN1TX bidirectional DCAN1 CAN transmit output, which can alternatively be configured as GPIO.
63 CAN1RX bidirectional DCAN1 CAN receive input with a programmable 20 µA pullup, which can alternatively be configured as GPIO.
64 N2HET[24] bidirectional N2HET timer input capture or output compare channel 24, with a programmable suppression filter.
65 MIBSPI1SIMO bidirectional MibSPI1 slave-in master-out signal, which can alternatively be configured as GPIO.
66 MIBSPI1SOMI bidirectional MibSPI1 slave-out master-in signal, which can alternatively be configured as GPIO.
67 MIBSPI1CLK bidirectional MibSPI1 serial clock with a programmable 20 µA pullup, which can alternatively be configured as GPIO.
68 MIBSPI1nENA bidirectional MibSPI1 enable that can alternatively carry N2HET[23] or N2HET[30], or be configured as GPIO.
69 SPI2SOMI bidirectional SPI2 slave-out master-in signal with selectable 8 mA or 2 mA drive strength, which can alternatively be configured as GPIO.
70 SPI2SIMO bidirectional SPI2 slave-in master-out signal with selectable 8 mA or 2 mA drive strength, which can alternatively be configured as GPIO.
71 SPI2CLK bidirectional SPI2 serial clock with a programmable 20 µA pullup and selectable 8 mA or 2 mA drive strength, which can alternatively be configured as GPIO.
72 VSS power_in Device ground reference for the core and I/O supplies.
73 MIBSPI1nCS[0] bidirectional MibSPI1 chip select 0, which can alternatively be configured as GPIO.
74 N2HET[8] bidirectional N2HET timer input capture or output compare channel 8, with a programmable suppression filter and a 20 µA pulldown.
75 TMS bidirectional JTAG test select with a fixed 100 µA pullup.
76 nTRST input JTAG test hardware reset with a fixed 100 µA pulldown.
77 TDI bidirectional JTAG test data input with a fixed 100 µA pullup.
78 TDO output JTAG test data output with a fixed 100 µA pulldown.
79 TCK input JTAG test clock with a fixed 100 µA pulldown.
80 RTCK output JTAG return test clock output.
81 nRST bidirectional Warm reset that the internal circuitry drives low on a device reset and that an external circuit can assert low; it is an open-drain output with a 100 µA internal pullup and a glitch filter of 475 ns to 2000 ns, and TI recommends an external pullup.
82 nERROR bidirectional ESM error signal that indicates an error of high severity, with a 20 µA pulldown.
83 N2HET[10] bidirectional N2HET timer input capture or output compare channel 10, with a programmable suppression filter and a 20 µA pulldown.
84 ECLK bidirectional External prescaled clock output with a 20 µA pulldown, which can alternatively be configured as GPIO.
85 VCCIO power_in I/O supply, 3.3 V nominal, with a recommended operating range of 3.0 V to 3.6 V.
86 VSS power_in Device ground reference for the core and I/O supplies.
87 VSS power_in Device ground reference for the core and I/O supplies.
88 VCC power_in Digital logic and RAM core supply, 1.2 V nominal, with a recommended operating range of 1.14 V to 1.32 V.
89 N2HET[12] bidirectional N2HET timer input capture or output compare channel 12, with a programmable suppression filter and a 20 µA pulldown.
90 N2HET[14] bidirectional N2HET timer input capture or output compare channel 14, with a programmable suppression filter and a 20 µA pulldown.
91 CAN2TX bidirectional DCAN2 CAN transmit output, which can alternatively be configured as GPIO.
92 CAN2RX bidirectional DCAN2 CAN receive input with a programmable 20 µA pullup, which can alternatively be configured as GPIO.
93 MIBSPI1nCS[1] bidirectional MibSPI1 chip select 1 that can alternatively carry the eQEP strobe input EQEPS or N2HET[17], or be configured as GPIO.
94 LINRX bidirectional LIN receive input with a programmable 20 µA pullup, which can alternatively be configured as GPIO.
95 LINTX bidirectional LIN transmit output, which can alternatively be configured as GPIO.
96 VCCP power_in Flash external pump supply of 3.3 V nominal, required for both flash read and flash program/erase operations, with a recommended range of 3.0 V to 3.6 V.
97 N2HET[16] bidirectional N2HET timer input capture or output compare channel 16, with a programmable suppression filter and a 20 µA pulldown.
98 N2HET[18] bidirectional N2HET timer input capture or output compare channel 18, with a programmable suppression filter and a 20 µA pulldown.
99 VCC power_in Digital logic and RAM core supply, 1.2 V nominal, with a recommended operating range of 1.14 V to 1.32 V.
100 VSS power_in Device ground reference for the core and I/O supplies.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package LQFP-100(14x14)
Category Single Chip Microcomputer/Microcontroller
Pins 100

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (core) VCC -0.3 1.43 V 18
Supply voltage (I/O and flash pump) VCCIO, VCCP -0.3 4.6 V 18
Supply voltage (MibADC) VCCAD -0.3 3.6 V 18
Input voltage, all input pins VI -0.3 4.6 V All input pins 18
ADC input voltage VI -0.3 4.6 V ADC input pins 18
Input clamp current (VI < 0 or VI > VCCIO) IIK -20 20 mA VI < 0 or VI > VCCIO; all pins except ADIN[21:20,17:16,11:0] 18
Input clamp current (VI < 0 or VI > VCCAD) IIK -10 10 mA VI < 0 or VI > VCCAD; ADIN[21:20,17:16,11:0] 18
Total input clamp current IIK -40 40 mA Total 18
Operating free-air temperature TA -40 125 °C 18
Operating junction temperature TJ -40 150 °C 18
Latch-up performance -100 100 mA I-test, all I/O pins 18
Storage temperature Tstg -65 150 °C 18
Digital logic supply voltage (core) VCC 1.14 1.2 1.32 V 19
Digital logic supply voltage (I/O) VCCIO 3 3.3 3.6 V 19
MibADC supply voltage / A-to-D high-voltage reference VCCAD / VADREFHI 3 3.3 3.6 V 19
Flash pump supply voltage VCCP 3 3.3 3.6 V 19
MibADC supply ground / A-to-D low-voltage reference VSSAD / VADREFLO -0.1 0.1 V 19
Maximum positive slew rate for VCCIO, VCCAD and VCCP supplies VSLEW 1 V/µs 19
Operating free-air temperature TA -40 125 °C 19
Operating junction temperature TJ -40 150 °C 19
HCLK system clock frequency fHCLK 80 MHz 19
VCLK primary peripheral clock frequency fVCLK 80 MHz 19
VCLK2 secondary peripheral clock frequency fVCLK2 80 MHz 19
VCLKA1 primary asynchronous peripheral clock frequency fVCLKA1 80 MHz 19
VCC digital supply current (operating mode) ICC 135 mA fHCLK = 80 MHz 21
VCC digital supply current (LBIST mode) ICC 145 mA LBIST clock rate = 45 MHz 21
VCC digital supply current (PBIST mode) ICC 135 mA PBIST ROM clock frequency = 80 MHz 21
ADREFHI supply current (operating mode) ICCREFHI 3 mA ADREFHImax 21
VCCIO digital supply current (operating mode) ICCIO 45 mA No DC load, VCCmax 21
3.3-V supply current (program or erase) ICCP, ICCIO, ICCAD 65 mA Read from one bank, and program or erase another, VCCPmax 21
Input hysteresis Vhys 180 mV All inputs 22
Low-level input voltage VIL -0.3 0.8 V All inputs 22
High-level input voltage VIH 2 V All inputs 22
Low-level output voltage (standard output mode) VOL 0.2 V IOL = 50 µA, standard output mode 22
Input clamp current (I/O pins) IIC -3.5 3.5 mA VI < VSSIO - 0.3 or VI > VCCIO + 0.3 22
IIH 20-µA pulldown input current IIH 5 40 µA VI = VCCIO 22
IIH 100-µA pulldown input current IIH 40 195 µA VI = VCCIO 22
IIL 20-µA pullup input current IIL -40 -5 µA VI = VSS 22
IIL 100-µA pullup input current IIL -195 -40 µA VI = VSS 22
Input current (no pullup or pulldown) II -1 1 µA All other pins 22
Analog input mux on-resistance Rmux 95 250 Ω See Figure 7-1 71
ADC sample switch on-resistance Rsamp 60 250 Ω See Figure 7-1 71
Input mux capacitance Cmux 7 16 pF See Figure 7-1 71
ADC sample capacitance Csamp 8 13 pF See Figure 7-1 71
Analog off-state input leakage current IAIL -300 -1 200 nA VSSAD < VIN < VSSAD + 100 mV 71
Analog off-state input leakage current IAIL -200 -0.3 200 nA VSSAD + 100 mV < VIN < VCCAD - 200 mV 71
Analog off-state input leakage current IAIL -200 1 500 nA VCCAD - 200 mV < VIN < VCCAD 71
Conversion range (ADREFHI - ADREFLO) 3 3.6 V ADREFHI - ADREFLO 73
Gain error (FSET), 10-bit mode FSET 2 LSB 10-bit mode 73
Gain error (FSET), 12-bit mode FSET 3 LSB 12-bit mode 73
Differential nonlinearity error (EDNL), 10-bit mode EDNL -1.5 1.5 LSB 10-bit mode 73
Differential nonlinearity error (EDNL), 12-bit mode EDNL -2 2 LSB 12-bit mode 73
Integral nonlinearity error (EINL), 10-bit mode EINL -2 2 LSB 10-bit mode 73
Integral nonlinearity error (EINL), 12-bit mode EINL -2 2 LSB 12-bit mode 73
Total unadjusted error (ETOT), with ADC calibration, 10-bit mode ETOT -2 2 LSB With ADC Calibration, 10-bit mode 73
Total unadjusted error (ETOT), without ADC calibration, 10-bit mode ETOT -4 4 LSB Without ADC Calibration, 10-bit mode 73
Total unadjusted error (ETOT), with ADC calibration, 12-bit mode ETOT -4 4 LSB With ADC Calibration, 12-bit mode 73
Total unadjusted error (ETOT), without ADC calibration, 12-bit mode ETOT -7 7 LSB Without ADC Calibration, 12-bit mode 73
Junction-to-ambient thermal resistance (PZ) RθJA 48 °C/W 22
Junction-to-case thermal resistance (PZ) RθJC 5 °C/W 22

CAD (KiCad official)

  • Symbol: TMS5700232BPZQQ1
  • Footprint: Package_QFP:LQFP-100_14x14mm_P0.5mm
  • 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
  • 3D model files: tms5700232bpzqq1-etched.step / tms5700232bpzqq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tms5700232bpzqq1.step / tms5700232bpzqq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (111 pp, sha256 b8f78d7cfd21adb2, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF