component
TMS5700232BPZQQ1
Public Made by Adomby adom
Texas Instruments Microcontroller Units (MCUs/MPUs/SOCs), LQFP-100(14x14). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
TMS5700232BPZQQ1
Texas Instruments · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-100(14x14)
TMS5700232BPZQQ1 from Texas Instruments, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GIOA[0]/SPI3nCS[3] | bidirectional | General-purpose I/O GIOA[0] with a programmable pulldown of 20 µA that can generate CPU interrupts on rising, falling or both edges, and that can alternatively carry SPI3nCS[3]. |
| 2 | GIOA[1]/SPI3nCS[2] | bidirectional | General-purpose I/O GIOA[1] with a programmable pulldown of 20 µA that can generate CPU interrupts on rising, falling or both edges, and that can alternatively carry SPI3nCS[2]. |
| 3 | FLTP1 | input | Flash test pin that must connect only to a test pad or be left unconnected, and must not be exposed to ESD in the final product. |
| 4 | FLTP2 | input | Flash test pin that must connect only to a test pad or be left unconnected, and must not be exposed to ESD in the final product. |
| 5 | GIOA[2]/SPI3nCS[1] | bidirectional | General-purpose I/O GIOA[2] with a programmable pulldown of 20 µA that can generate CPU interrupts on rising, falling or both edges, and that can alternatively carry SPI3nCS[1]. |
| 6 | VCCIO | power_in | I/O supply, 3.3 V nominal, with a recommended operating range of 3.0 V to 3.6 V. |
| 7 | VSS | power_in | Device ground reference for the core and I/O supplies. |
| 8 | GIOA[3]/SPI2nCS[3] | bidirectional | General-purpose I/O GIOA[3] that can generate CPU interrupts on rising, falling or both edges, and that can alternatively carry SPI2nCS[3]. |
| 9 | GIOA[4]/SPI2nCS[2] | bidirectional | General-purpose I/O GIOA[4] that can generate CPU interrupts on rising, falling or both edges, and that can alternatively carry SPI2nCS[2]. |
| 10 | GIOA[5]/EXTCLKIN | bidirectional | General-purpose I/O GIOA[5] that can alternatively serve as the external clock input EXTCLKIN. |
| 11 | N2HET[22] | bidirectional | N2HET timer input capture or output compare channel 22, which can be programmed as GPIO and has a programmable suppression filter. |
| 12 | GIOA[6]/SPI2nCS[1]/N2HET[31] | bidirectional | General-purpose I/O GIOA[6] that can alternatively carry SPI2nCS[1] or N2HET[31]. |
| 13 | VCC | power_in | Digital logic and RAM core supply, 1.2 V nominal, with a recommended operating range of 1.14 V to 1.32 V. |
| 14 | OSCIN | input | Main oscillator input from an external crystal or resonator, or an external clock input. |
| 15 | KELVIN_GND | power_in | Dedicated ground for the oscillator that should not be connected to any other ground. |
| 16 | OSCOUT | output | Main oscillator output to an external crystal or resonator, left open when an external clock drives OSCIN. |
| 17 | VSS | power_in | Listed as a device ground; the datasheet footnote states that this pin is the ADC supply ground reference, which is an exception to the common ground. |
| 18 | GIOA[7]/N2HET[29] | bidirectional | General-purpose I/O GIOA[7] that can generate CPU interrupts on rising, falling or both edges, and that can alternatively carry N2HET[29]. |
| 19 | N2HET[0] | bidirectional | N2HET timer input capture or output compare channel 0, with a programmable suppression filter and a 20 µA pulldown. |
| 20 | VSS | power_in | Device ground reference for the core and I/O supplies. |
| 21 | VCC | power_in | Digital logic and RAM core supply, 1.2 V nominal, with a recommended operating range of 1.14 V to 1.32 V. |
| 22 | N2HET[2] | bidirectional | N2HET timer input capture or output compare channel 2, with a programmable suppression filter and a 20 µA pulldown. |
| 23 | SPI2nCS[0] | bidirectional | SPI2 chip select 0, which can alternatively be configured as GPIO. |
| 24 | TEST | bidirectional | Test enable that must be connected directly to ground or through a pulldown resistor. |
| 25 | N2HET[4] | bidirectional | N2HET timer input capture or output compare channel 4, with a programmable suppression filter and a 20 µA pulldown. |
| 26 | N2HET[6] | bidirectional | N2HET timer input capture or output compare channel 6, with a programmable suppression filter and a 20 µA pulldown. |
| 27 | MIBSPI1nCS[2] | bidirectional | MibSPI1 chip select 2 that can alternatively carry N2HET[20] or N2HET[19], or be configured as GPIO. |
| 28 | VCCIO | power_in | I/O supply, 3.3 V nominal, with a recommended operating range of 3.0 V to 3.6 V. |
| 29 | VSS | power_in | Device ground reference for the core and I/O supplies. |
| 30 | VCC | power_in | Digital logic and RAM core supply, 1.2 V nominal, with a recommended operating range of 1.14 V to 1.32 V. |
| 31 | nPORRST | input | Power-on reset input that external power supply monitor circuitry must drive low when any supply is out of range, with a glitch filter of 475 ns to 2000 ns and an internal 100 µA pulldown. |
| 32 | VCC | power_in | Digital logic and RAM core supply, 1.2 V nominal, with a recommended operating range of 1.14 V to 1.32 V. |
| 33 | VSS | power_in | Device ground reference for the core and I/O supplies. |
| 34 | SPI3SOMI | bidirectional | SPI3 slave-out master-in signal, which can alternatively be configured as GPIO. |
| 35 | SPI3SIMO | bidirectional | SPI3 slave-in master-out signal, which can alternatively be configured as GPIO. |
| 36 | SPI3CLK/EQEPA | bidirectional | SPI3 serial clock that can alternatively carry the eQEP input A, with a programmable pullup of 20 µA. |
| 37 | SPI3nENA/EQEPB | bidirectional | SPI3 enable that can alternatively carry the eQEP input B. |
| 38 | SPI3nCS[0]/EQEPI | bidirectional | SPI3 chip select 0 that can alternatively carry the eQEP index input. |
| 39 | MIBSPI1nCS[3]/N2HET[26] | bidirectional | MibSPI1 chip select 3 that can alternatively carry N2HET[26], or be configured as GPIO. |
| 40 | ADIN[16] | passive | MibADC analog input channel 16. |
| 41 | ADIN[17] | passive | MibADC analog input channel 17. |
| 42 | ADIN[0] | passive | MibADC analog input channel 0. |
| 43 | ADIN[7] | passive | MibADC analog input channel 7. |
| 44 | ADIN[20] | passive | MibADC analog input channel 20. |
| 45 | ADIN[21] | passive | MibADC analog input channel 21. |
| 46 | VCCAD/ADREFHI | power_in | MibADC operating supply, 3.3 V nominal, with a recommended operating range of 3.0 V to 3.6 V, also serving as the ADC high voltage reference. |
| 47 | VSSAD/ADREFLO | power_in | MibADC supply ground and ADC low voltage reference, with a recommended range of -0.1 V to 0.1 V. |
| 48 | ADIN[9] | passive | MibADC analog input channel 9. |
| 49 | ADIN[1] | passive | MibADC analog input channel 1. |
| 50 | ADIN[10] | passive | MibADC analog input channel 10. |
| 51 | ADIN[2] | passive | MibADC analog input channel 2. |
| 52 | ADIN[3] | passive | MibADC analog input channel 3. |
| 53 | ADIN[11] | passive | MibADC analog input channel 11. |
| 54 | ADIN[4] | passive | MibADC analog input channel 4. |
| 55 | ADIN[5] | passive | MibADC analog input channel 5. |
| 56 | ADIN[6] | passive | MibADC analog input channel 6. |
| 57 | ADIN[8] | passive | MibADC analog input channel 8. |
| 58 | ADEVT/N2HET[28] | bidirectional | MibADC external event trigger that can alternatively carry N2HET[28] or be configured as GPIO, with a programmable 20 µA pullup. |
| 59 | VSS | power_in | Device ground reference for the core and I/O supplies. |
| 60 | VCCIO | power_in | I/O supply, 3.3 V nominal, with a recommended operating range of 3.0 V to 3.6 V. |
| 61 | VCC | power_in | Digital logic and RAM core supply, 1.2 V nominal, with a recommended operating range of 1.14 V to 1.32 V. |
| 62 | CAN1TX | bidirectional | DCAN1 CAN transmit output, which can alternatively be configured as GPIO. |
| 63 | CAN1RX | bidirectional | DCAN1 CAN receive input with a programmable 20 µA pullup, which can alternatively be configured as GPIO. |
| 64 | N2HET[24] | bidirectional | N2HET timer input capture or output compare channel 24, with a programmable suppression filter. |
| 65 | MIBSPI1SIMO | bidirectional | MibSPI1 slave-in master-out signal, which can alternatively be configured as GPIO. |
| 66 | MIBSPI1SOMI | bidirectional | MibSPI1 slave-out master-in signal, which can alternatively be configured as GPIO. |
| 67 | MIBSPI1CLK | bidirectional | MibSPI1 serial clock with a programmable 20 µA pullup, which can alternatively be configured as GPIO. |
| 68 | MIBSPI1nENA | bidirectional | MibSPI1 enable that can alternatively carry N2HET[23] or N2HET[30], or be configured as GPIO. |
| 69 | SPI2SOMI | bidirectional | SPI2 slave-out master-in signal with selectable 8 mA or 2 mA drive strength, which can alternatively be configured as GPIO. |
| 70 | SPI2SIMO | bidirectional | SPI2 slave-in master-out signal with selectable 8 mA or 2 mA drive strength, which can alternatively be configured as GPIO. |
| 71 | SPI2CLK | bidirectional | SPI2 serial clock with a programmable 20 µA pullup and selectable 8 mA or 2 mA drive strength, which can alternatively be configured as GPIO. |
| 72 | VSS | power_in | Device ground reference for the core and I/O supplies. |
| 73 | MIBSPI1nCS[0] | bidirectional | MibSPI1 chip select 0, which can alternatively be configured as GPIO. |
| 74 | N2HET[8] | bidirectional | N2HET timer input capture or output compare channel 8, with a programmable suppression filter and a 20 µA pulldown. |
| 75 | TMS | bidirectional | JTAG test select with a fixed 100 µA pullup. |
| 76 | nTRST | input | JTAG test hardware reset with a fixed 100 µA pulldown. |
| 77 | TDI | bidirectional | JTAG test data input with a fixed 100 µA pullup. |
| 78 | TDO | output | JTAG test data output with a fixed 100 µA pulldown. |
| 79 | TCK | input | JTAG test clock with a fixed 100 µA pulldown. |
| 80 | RTCK | output | JTAG return test clock output. |
| 81 | nRST | bidirectional | Warm reset that the internal circuitry drives low on a device reset and that an external circuit can assert low; it is an open-drain output with a 100 µA internal pullup and a glitch filter of 475 ns to 2000 ns, and TI recommends an external pullup. |
| 82 | nERROR | bidirectional | ESM error signal that indicates an error of high severity, with a 20 µA pulldown. |
| 83 | N2HET[10] | bidirectional | N2HET timer input capture or output compare channel 10, with a programmable suppression filter and a 20 µA pulldown. |
| 84 | ECLK | bidirectional | External prescaled clock output with a 20 µA pulldown, which can alternatively be configured as GPIO. |
| 85 | VCCIO | power_in | I/O supply, 3.3 V nominal, with a recommended operating range of 3.0 V to 3.6 V. |
| 86 | VSS | power_in | Device ground reference for the core and I/O supplies. |
| 87 | VSS | power_in | Device ground reference for the core and I/O supplies. |
| 88 | VCC | power_in | Digital logic and RAM core supply, 1.2 V nominal, with a recommended operating range of 1.14 V to 1.32 V. |
| 89 | N2HET[12] | bidirectional | N2HET timer input capture or output compare channel 12, with a programmable suppression filter and a 20 µA pulldown. |
| 90 | N2HET[14] | bidirectional | N2HET timer input capture or output compare channel 14, with a programmable suppression filter and a 20 µA pulldown. |
| 91 | CAN2TX | bidirectional | DCAN2 CAN transmit output, which can alternatively be configured as GPIO. |
| 92 | CAN2RX | bidirectional | DCAN2 CAN receive input with a programmable 20 µA pullup, which can alternatively be configured as GPIO. |
| 93 | MIBSPI1nCS[1] | bidirectional | MibSPI1 chip select 1 that can alternatively carry the eQEP strobe input EQEPS or N2HET[17], or be configured as GPIO. |
| 94 | LINRX | bidirectional | LIN receive input with a programmable 20 µA pullup, which can alternatively be configured as GPIO. |
| 95 | LINTX | bidirectional | LIN transmit output, which can alternatively be configured as GPIO. |
| 96 | VCCP | power_in | Flash external pump supply of 3.3 V nominal, required for both flash read and flash program/erase operations, with a recommended range of 3.0 V to 3.6 V. |
| 97 | N2HET[16] | bidirectional | N2HET timer input capture or output compare channel 16, with a programmable suppression filter and a 20 µA pulldown. |
| 98 | N2HET[18] | bidirectional | N2HET timer input capture or output compare channel 18, with a programmable suppression filter and a 20 µA pulldown. |
| 99 | VCC | power_in | Digital logic and RAM core supply, 1.2 V nominal, with a recommended operating range of 1.14 V to 1.32 V. |
| 100 | VSS | power_in | Device ground reference for the core and I/O supplies. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | LQFP-100(14x14) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (core) | VCC | -0.3 | 1.43 | V | 18 | ||
| Supply voltage (I/O and flash pump) | VCCIO, VCCP | -0.3 | 4.6 | V | 18 | ||
| Supply voltage (MibADC) | VCCAD | -0.3 | 3.6 | V | 18 | ||
| Input voltage, all input pins | VI | -0.3 | 4.6 | V | All input pins | 18 | |
| ADC input voltage | VI | -0.3 | 4.6 | V | ADC input pins | 18 | |
| Input clamp current (VI < 0 or VI > VCCIO) | IIK | -20 | 20 | mA | VI < 0 or VI > VCCIO; all pins except ADIN[21:20,17:16,11:0] | 18 | |
| Input clamp current (VI < 0 or VI > VCCAD) | IIK | -10 | 10 | mA | VI < 0 or VI > VCCAD; ADIN[21:20,17:16,11:0] | 18 | |
| Total input clamp current | IIK | -40 | 40 | mA | Total | 18 | |
| Operating free-air temperature | TA | -40 | 125 | °C | 18 | ||
| Operating junction temperature | TJ | -40 | 150 | °C | 18 | ||
| Latch-up performance | -100 | 100 | mA | I-test, all I/O pins | 18 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 18 | ||
| Digital logic supply voltage (core) | VCC | 1.14 | 1.2 | 1.32 | V | 19 | |
| Digital logic supply voltage (I/O) | VCCIO | 3 | 3.3 | 3.6 | V | 19 | |
| MibADC supply voltage / A-to-D high-voltage reference | VCCAD / VADREFHI | 3 | 3.3 | 3.6 | V | 19 | |
| Flash pump supply voltage | VCCP | 3 | 3.3 | 3.6 | V | 19 | |
| MibADC supply ground / A-to-D low-voltage reference | VSSAD / VADREFLO | -0.1 | 0.1 | V | 19 | ||
| Maximum positive slew rate for VCCIO, VCCAD and VCCP supplies | VSLEW | 1 | V/µs | 19 | |||
| Operating free-air temperature | TA | -40 | 125 | °C | 19 | ||
| Operating junction temperature | TJ | -40 | 150 | °C | 19 | ||
| HCLK system clock frequency | fHCLK | 80 | MHz | 19 | |||
| VCLK primary peripheral clock frequency | fVCLK | 80 | MHz | 19 | |||
| VCLK2 secondary peripheral clock frequency | fVCLK2 | 80 | MHz | 19 | |||
| VCLKA1 primary asynchronous peripheral clock frequency | fVCLKA1 | 80 | MHz | 19 | |||
| VCC digital supply current (operating mode) | ICC | 135 | mA | fHCLK = 80 MHz | 21 | ||
| VCC digital supply current (LBIST mode) | ICC | 145 | mA | LBIST clock rate = 45 MHz | 21 | ||
| VCC digital supply current (PBIST mode) | ICC | 135 | mA | PBIST ROM clock frequency = 80 MHz | 21 | ||
| ADREFHI supply current (operating mode) | ICCREFHI | 3 | mA | ADREFHImax | 21 | ||
| VCCIO digital supply current (operating mode) | ICCIO | 45 | mA | No DC load, VCCmax | 21 | ||
| 3.3-V supply current (program or erase) | ICCP, ICCIO, ICCAD | 65 | mA | Read from one bank, and program or erase another, VCCPmax | 21 | ||
| Input hysteresis | Vhys | 180 | mV | All inputs | 22 | ||
| Low-level input voltage | VIL | -0.3 | 0.8 | V | All inputs | 22 | |
| High-level input voltage | VIH | 2 | V | All inputs | 22 | ||
| Low-level output voltage (standard output mode) | VOL | 0.2 | V | IOL = 50 µA, standard output mode | 22 | ||
| Input clamp current (I/O pins) | IIC | -3.5 | 3.5 | mA | VI < VSSIO - 0.3 or VI > VCCIO + 0.3 | 22 | |
| IIH 20-µA pulldown input current | IIH | 5 | 40 | µA | VI = VCCIO | 22 | |
| IIH 100-µA pulldown input current | IIH | 40 | 195 | µA | VI = VCCIO | 22 | |
| IIL 20-µA pullup input current | IIL | -40 | -5 | µA | VI = VSS | 22 | |
| IIL 100-µA pullup input current | IIL | -195 | -40 | µA | VI = VSS | 22 | |
| Input current (no pullup or pulldown) | II | -1 | 1 | µA | All other pins | 22 | |
| Analog input mux on-resistance | Rmux | 95 | 250 | Ω | See Figure 7-1 | 71 | |
| ADC sample switch on-resistance | Rsamp | 60 | 250 | Ω | See Figure 7-1 | 71 | |
| Input mux capacitance | Cmux | 7 | 16 | pF | See Figure 7-1 | 71 | |
| ADC sample capacitance | Csamp | 8 | 13 | pF | See Figure 7-1 | 71 | |
| Analog off-state input leakage current | IAIL | -300 | -1 | 200 | nA | VSSAD < VIN < VSSAD + 100 mV | 71 |
| Analog off-state input leakage current | IAIL | -200 | -0.3 | 200 | nA | VSSAD + 100 mV < VIN < VCCAD - 200 mV | 71 |
| Analog off-state input leakage current | IAIL | -200 | 1 | 500 | nA | VCCAD - 200 mV < VIN < VCCAD | 71 |
| Conversion range (ADREFHI - ADREFLO) | 3 | 3.6 | V | ADREFHI - ADREFLO | 73 | ||
| Gain error (FSET), 10-bit mode | FSET | 2 | LSB | 10-bit mode | 73 | ||
| Gain error (FSET), 12-bit mode | FSET | 3 | LSB | 12-bit mode | 73 | ||
| Differential nonlinearity error (EDNL), 10-bit mode | EDNL | -1.5 | 1.5 | LSB | 10-bit mode | 73 | |
| Differential nonlinearity error (EDNL), 12-bit mode | EDNL | -2 | 2 | LSB | 12-bit mode | 73 | |
| Integral nonlinearity error (EINL), 10-bit mode | EINL | -2 | 2 | LSB | 10-bit mode | 73 | |
| Integral nonlinearity error (EINL), 12-bit mode | EINL | -2 | 2 | LSB | 12-bit mode | 73 | |
| Total unadjusted error (ETOT), with ADC calibration, 10-bit mode | ETOT | -2 | 2 | LSB | With ADC Calibration, 10-bit mode | 73 | |
| Total unadjusted error (ETOT), without ADC calibration, 10-bit mode | ETOT | -4 | 4 | LSB | Without ADC Calibration, 10-bit mode | 73 | |
| Total unadjusted error (ETOT), with ADC calibration, 12-bit mode | ETOT | -4 | 4 | LSB | With ADC Calibration, 12-bit mode | 73 | |
| Total unadjusted error (ETOT), without ADC calibration, 12-bit mode | ETOT | -7 | 7 | LSB | Without ADC Calibration, 12-bit mode | 73 | |
| Junction-to-ambient thermal resistance (PZ) | RθJA | 48 | °C/W | 22 | |||
| Junction-to-case thermal resistance (PZ) | RθJC | 5 | °C/W | 22 |
CAD (KiCad official)
- Symbol:
TMS5700232BPZQQ1 - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
tms5700232bpzqq1-etched.step/tms5700232bpzqq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tms5700232bpzqq1.step/tms5700232bpzqq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (111 pp, sha256
b8f78d7cfd21adb2, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).