component
TMS320LF2406APZAR
Public Made by Adomby adom
Texas Instruments Microcontroller Units (MCUs/MPUs/SOCs), LQFP-100(14x14). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Set visibility: public
d52ca52
1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189119011911192119311941195119611971198119912001201120212031204120512061207120812091210121112121213121412151216121712181219122012211222122312241225122612271228122912301231123212331234123512361237123812391240124112421243124412451246124712481249125012511252125312541255125612571258125912601261126212631264126512661267126812691270127112721273127412751276127712781279128012811282128312841285128612871288128912901291129212931294129512961297129812991300130113021303130413051306130713081309131013111312131313141315131613171318131913201321132213231324132513261327132813291330133113321333133413351336133713381339134013411342134313441345134613471348134913501351135213531354135513561357135813591360136113621363136413651366136713681369137013711372137313741375137613771378137913801381138213831384138513861387138813891390139113921393139413951396139713981399140014011402140314041405140614071408140914101411141214131414141514161417141814191420142114221423142414251426142714281429143014311432143314341435143614371438143914401441144214431444144514461447144814491450145114521453145414551456145714581459146014611462146314641465146614671468146914701471147214731474147514761477147814791480148114821483148414851486148714881489149014911492149314941495149614971498149915001501150215031504150515061507150815091510151115121513151415151516151715181519152015211522152315241525
{
"schema_version": 1,
"type": "component",
"slug": "tms320lf2406apzar",
"title": "TMS320LF2406APZAR",
"brief": "Texas Instruments Microcontroller Units (MCUs/MPUs/SOCs), LQFP-100(14x14). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"single chip microcomputer-microcontroller",
"tms320lf2406apzar",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "TMS320LF2406APZAR",
"manufacturer": "Texas Instruments",
"package": "LQFP-100(14x14)",
"pin_count": 100,
"category": "Single Chip Microcomputer/Microcontroller",
"subcategory": "Microcontroller Units (MCUs/MPUs/SOCs)",
"datasheet": "https://www.ti.com/lit/ds/symlink/tms320lf2402a.pdf",
"parts": {
"symbol": "tms320lf2406apzar.kicad_sym",
"footprint": "tms320lf2406apzar.kicad_mod",
"model_3d": "tms320lf2406apzar-hero.glb",
"model_3d_plain": "tms320lf2406apzar.glb",
"model_3d_step": "tms320lf2406apzar-etched.step",
"model_3d_step_plain": "tms320lf2406apzar.step",
"lbr": "tms320lf2406apzar.lbr"
},
"distributor_links": {
"lcsc": "C2053958",
"digikey": "296-26861-2-ND",
"mouser": "595-TMS320LF2406ZAR"
},
"distributor_check": {
"checked_at": "2026-11-13T17:21:12Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-26861-2-ND",
"status": "found"
},
"mouser": {
"pn": "595-TMS320LF2406ZAR",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "TRST",
"type": "input",
"description": "JTAG test reset with internal pulldown; it must be maintained low during normal device operation and pullup resistors must not be used on it."
},
{
"number": "2",
"name": "TDIRB/IOPF4",
"type": "bidirectional",
"description": "Counting direction input for the EVB general-purpose timer or GPIO; TDIRB = 1 selects upward counting and TDIRB = 0 selects downward counting."
},
{
"number": "3",
"name": "VSSO",
"type": "power_in",
"description": "I/O buffer ground and digital logic/buffer ground reference; all power supply pins must be connected for proper operation."
},
{
"number": "4",
"name": "VDDO",
"type": "power_in",
"description": "I/O buffer supply, +3.3 V digital logic and buffer supply voltage."
},
{
"number": "5",
"name": "T4PWM/T4CMP/IOPF3",
"type": "bidirectional",
"description": "Timer 4 compare output (EVB) or GPIO."
},
{
"number": "6",
"name": "PDPINTA",
"type": "input",
"description": "Power drive protection interrupt input that places the EVA PWM outputs in high impedance on motor drive/power converter abnormalities such as overvoltage or overcurrent; it is falling-edge sensitive."
},
{
"number": "7",
"name": "T3PWM/T3CMP/IOPF2",
"type": "bidirectional",
"description": "Timer 3 compare output (EVB) or GPIO."
},
{
"number": "8",
"name": "PLLF2",
"type": "passive",
"description": "PLL loop filter input 2, connected to the external loop filter circuit (R1, C1, C2)."
},
{
"number": "9",
"name": "PLLF",
"type": "passive",
"description": "PLL loop filter input 1, connected to the external loop filter circuit (R1, C1, C2)."
},
{
"number": "10",
"name": "PLLVCCA",
"type": "power_in",
"description": "PLL supply, 3.3 V."
},
{
"number": "11",
"name": "TDIRA/IOPB6",
"type": "bidirectional",
"description": "Counting direction input for the EVA general-purpose timer or GPIO; TDIRA = 1 selects upward counting and TDIRA = 0 selects downward counting."
},
{
"number": "12",
"name": "T1PWM/T1CMP/IOPB4",
"type": "bidirectional",
"description": "Timer 1 compare output (EVA) or GPIO."
},
{
"number": "13",
"name": "T2PWM/T2CMP/IOPB5",
"type": "bidirectional",
"description": "Timer 2 compare output (EVA) or GPIO."
},
{
"number": "14",
"name": "IOPC0",
"type": "bidirectional",
"description": "General-purpose I/O (shared with W/R); on the 2406A, W/R mode is not functional, so MCRB.0 must be set to 0 before the pin is used as IOPC0."
},
{
"number": "15",
"name": "XINT2/ADCSOC/IOPD0",
"type": "bidirectional",
"description": "External user interrupt 2 and external ADC start-of-conversion input, or GPIO; edge-sensitive with programmable polarity."
},
{
"number": "16",
"name": "XINT1/IOPA2",
"type": "bidirectional",
"description": "External user interrupt 1 or GPIO; edge-sensitive with programmable polarity."
},
{
"number": "17",
"name": "SCITXD/IOPA0",
"type": "bidirectional",
"description": "SCI asynchronous serial port transmit data or GPIO."
},
{
"number": "18",
"name": "SCIRXD/IOPA1",
"type": "bidirectional",
"description": "SCI asynchronous serial port receive data or GPIO."
},
{
"number": "19",
"name": "VSS",
"type": "power_in",
"description": "Core ground, digital logic ground reference."
},
{
"number": "20",
"name": "VDD",
"type": "power_in",
"description": "Core supply, +3.3 V digital logic supply voltage."
},
{
"number": "21",
"name": "SPISIMO/IOPC2",
"type": "bidirectional",
"description": "SPI slave in, master out, or GPIO."
},
{
"number": "22",
"name": "SPISOMI/IOPC3",
"type": "bidirectional",
"description": "SPI slave out, master in, or GPIO."
},
{
"number": "23",
"name": "SPISTE/IOPC5",
"type": "bidirectional",
"description": "SPI slave transmit enable (optional) or GPIO."
},
{
"number": "24",
"name": "SPICLK/IOPC4",
"type": "bidirectional",
"description": "SPI clock or GPIO."
},
{
"number": "25",
"name": "TMS2",
"type": "input",
"description": "JTAG test-mode select 2 with internal pullup, for test and emulation only; it may be left unconnected in user applications, and if PLL bypass is desired TMS2, TMS and TRST must be held low during reset."
},
{
"number": "26",
"name": "TCLKINA/IOPB7",
"type": "bidirectional",
"description": "External clock input for the EVA general-purpose timer or GPIO; the timer can also use the internal device clock."
},
{
"number": "27",
"name": "PWM12/IOPE6",
"type": "bidirectional",
"description": "Compare/PWM output pin #12 (EVB) or GPIO."
},
{
"number": "28",
"name": "PWM6/IOPB3",
"type": "bidirectional",
"description": "Compare/PWM output pin #6 (EVA) or GPIO."
},
{
"number": "29",
"name": "VSSO",
"type": "power_in",
"description": "I/O buffer ground, digital logic and buffer ground reference."
},
{
"number": "30",
"name": "VDDO",
"type": "power_in",
"description": "I/O buffer supply, +3.3 V digital logic and buffer supply voltage."
},
{
"number": "31",
"name": "PWM5/IOPB2",
"type": "bidirectional",
"description": "Compare/PWM output pin #5 (EVA) or GPIO."
},
{
"number": "32",
"name": "PWM11/IOPE5",
"type": "bidirectional",
"description": "Compare/PWM output pin #11 (EVB) or GPIO."
},
{
"number": "33",
"name": "PWM4/IOPB1",
"type": "bidirectional",
"description": "Compare/PWM output pin #4 (EVA) or GPIO."
},
{
"number": "34",
"name": "VSS",
"type": "power_in",
"description": "Core ground, digital logic ground reference."
},
{
"number": "35",
"name": "VDD",
"type": "power_in",
"description": "Core supply, +3.3 V digital logic supply voltage."
},
{
"number": "36",
"name": "PWM3/IOPB0",
"type": "bidirectional",
"description": "Compare/PWM output pin #3 (EVA) or GPIO."
},
{
"number": "37",
"name": "PWM2/IOPA7",
"type": "bidirectional",
"description": "Compare/PWM output pin #2 (EVA) or GPIO."
},
{
"number": "38",
"name": "PWM10/IOPE4",
"type": "bidirectional",
"description": "Compare/PWM output pin #10 (EVB) or GPIO."
},
{
"number": "39",
"name": "PWM1/IOPA6",
"type": "bidirectional",
"description": "Compare/PWM output pin #1 (EVA) or GPIO."
},
{
"number": "40",
"name": "VCCP (5V)",
"type": "power_in",
"description": "Flash programming voltage; must be connected to a 5-V supply for Flash programming, may be tied to 5 V or GND during normal operation, must not be left floating, and no current-limiting resistor may be used in series."
},
{
"number": "41",
"name": "PWM9/IOPE3",
"type": "bidirectional",
"description": "Compare/PWM output pin #9 (EVB) or GPIO."
},
{
"number": "42",
"name": "TP1",
"type": "unconnected",
"description": "Test pin 1; do not connect."
},
{
"number": "43",
"name": "PWM8/IOPE2",
"type": "bidirectional",
"description": "Compare/PWM output pin #8 (EVB) or GPIO."
},
{
"number": "44",
"name": "TP2",
"type": "unconnected",
"description": "Test pin 2; do not connect."
},
{
"number": "45",
"name": "PWM7/IOPE1",
"type": "bidirectional",
"description": "Compare/PWM output pin #7 (EVB) or GPIO."
},
{
"number": "46",
"name": "VSSO",
"type": "power_in",
"description": "I/O buffer ground, digital logic and buffer ground reference."
},
{
"number": "47",
"name": "VDDO",
"type": "power_in",
"description": "I/O buffer supply, +3.3 V digital logic and buffer supply voltage."
},
{
"number": "48",
"name": "CAP6/IOPF1",
"type": "bidirectional",
"description": "Capture input #6 (EVB) or GPIO."
},
{
"number": "49",
"name": "CANRX/IOPC7",
"type": "bidirectional",
"description": "CAN receive data or GPIO."
},
{
"number": "50",
"name": "CANTX/IOPC6",
"type": "bidirectional",
"description": "CAN transmit data or GPIO."
},
{
"number": "51",
"name": "CLKOUT/IOPE0",
"type": "bidirectional",
"description": "Clock output (CPU CLKOUT or watchdog clock WDCLK, selected by the CLKSRC bit of SCSR) or GPIO."
},
{
"number": "52",
"name": "CAP3/IOPA5",
"type": "bidirectional",
"description": "Capture input #3 (EVA) or GPIO."
},
{
"number": "53",
"name": "VSSO",
"type": "power_in",
"description": "I/O buffer ground, digital logic and buffer ground reference."
},
{
"number": "54",
"name": "VDDO",
"type": "power_in",
"description": "I/O buffer supply, +3.3 V digital logic and buffer supply voltage."
},
{
"number": "55",
"name": "CAP2/QEP2/IOPA4",
"type": "bidirectional",
"description": "Capture input #2 / quadrature encoder pulse input #2 (EVA) or GPIO."
},
{
"number": "56",
"name": "CAP5/QEP4/IOPF0",
"type": "bidirectional",
"description": "Capture input #5 / quadrature encoder pulse input #4 (EVB) or GPIO."
},
{
"number": "57",
"name": "CAP1/QEP1/IOPA3",
"type": "bidirectional",
"description": "Capture input #1 / quadrature encoder pulse input #1 (EVA) or GPIO."
},
{
"number": "58",
"name": "VSS",
"type": "power_in",
"description": "Core ground, digital logic ground reference."
},
{
"number": "59",
"name": "VDD",
"type": "power_in",
"description": "Core supply, +3.3 V digital logic supply voltage."
},
{
"number": "60",
"name": "CAP4/QEP3/IOPE7",
"type": "bidirectional",
"description": "Capture input #4 / quadrature encoder pulse input #3 (EVB) or GPIO."
},
{
"number": "61",
"name": "EMU0",
"type": "bidirectional",
"description": "Emulator I/O #0 with internal pullup; when TRST is driven high it is used as an interrupt to or from the emulator and is defined as input/output through the JTAG scan."
},
{
"number": "62",
"name": "EMU1/OFF",
"type": "bidirectional",
"description": "Emulator pin 1 with internal pullup; when TRST is driven low this pin is configured as OFF, and when active low it puts all output drivers in the high-impedance state (testing and emulation only)."
},
{
"number": "63",
"name": "VSSO",
"type": "power_in",
"description": "I/O buffer ground, digital logic and buffer ground reference."
},
{
"number": "64",
"name": "VDDO",
"type": "power_in",
"description": "I/O buffer supply, +3.3 V digital logic and buffer supply voltage."
},
{
"number": "65",
"name": "ADCIN15",
"type": "input",
"description": "Analog input #15 to the ADC."
},
{
"number": "66",
"name": "ADCIN07",
"type": "input",
"description": "Analog input #7 to the ADC."
},
{
"number": "67",
"name": "ADCIN06",
"type": "input",
"description": "Analog input #6 to the ADC."
},
{
"number": "68",
"name": "ADCIN14",
"type": "input",
"description": "Analog input #14 to the ADC."
},
{
"number": "69",
"name": "ADCIN05",
"type": "input",
"description": "Analog input #5 to the ADC."
},
{
"number": "70",
"name": "ADCIN04",
"type": "input",
"description": "Analog input #4 to the ADC."
},
{
"number": "71",
"name": "ADCIN13",
"type": "input",
"description": "Analog input #13 to the ADC."
},
{
"number": "72",
"name": "ADCIN03",
"type": "input",
"description": "Analog input #3 to the ADC."
},
{
"number": "73",
"name": "ADCIN12",
"type": "input",
"description": "Analog input #12 to the ADC."
},
{
"number": "74",
"name": "ADCIN02",
"type": "input",
"description": "Analog input #2 to the ADC."
},
{
"number": "75",
"name": "ADCIN11",
"type": "input",
"description": "Analog input #11 to the ADC."
},
{
"number": "76",
"name": "ADCIN10",
"type": "input",
"description": "Analog input #10 to the ADC."
},
{
"number": "77",
"name": "ADCIN01",
"type": "input",
"description": "Analog input #1 to the ADC."
},
{
"number": "78",
"name": "ADCIN09",
"type": "input",
"description": "Analog input #9 to the ADC."
},
{
"number": "79",
"name": "ADCIN00",
"type": "input",
"description": "Analog input #0 to the ADC."
},
{
"number": "80",
"name": "ADCIN08",
"type": "input",
"description": "Analog input #8 to the ADC."
},
{
"number": "81",
"name": "VREFLO",
"type": "input",
"description": "ADC analog low-voltage reference input."
},
{
"number": "82",
"name": "VREFHI",
"type": "input",
"description": "ADC analog high-voltage reference input."
},
{
"number": "83",
"name": "VCCA",
"type": "power_in",
"description": "Analog supply voltage for the ADC, 3.3 V; it is highly recommended to isolate VCCA from the digital supply for ADC accuracy and noise immunity."
},
{
"number": "84",
"name": "VSSA",
"type": "power_in",
"description": "Analog ground reference for the ADC; it is highly recommended to isolate VSSA from digital ground."
},
{
"number": "85",
"name": "BIO/IOPC1",
"type": "bidirectional",
"description": "Branch control input polled by the BCND instruction (branch executed if low); if not used it should be pulled high, and it can be used as GPIO if not used as branch control input."
},
{
"number": "86",
"name": "BOOT_EN/XF",
"type": "bidirectional",
"description": "Boot ROM enable sampled as input during reset, then driven as the XF output (driven high after reset); it must be driven with a passive circuit only."
},
{
"number": "87",
"name": "XTAL1/CLKIN",
"type": "input",
"description": "PLL oscillator input: crystal input or clock source input to the PLL, with input frequency 4-20 MHz for crystal or external clock with PLL."
},
{
"number": "88",
"name": "XTAL2",
"type": "output",
"description": "Crystal output (PLL oscillator output); it goes to the high-impedance state when EMU1/OFF is active low."
},
{
"number": "89",
"name": "TCLKINB/IOPF5",
"type": "bidirectional",
"description": "External clock input for the EVB general-purpose timer or GPIO; the timer can also use the internal device clock."
},
{
"number": "90",
"name": "VSS",
"type": "power_in",
"description": "Core ground, digital logic ground reference."
},
{
"number": "91",
"name": "VDD",
"type": "power_in",
"description": "Core supply, +3.3 V digital logic supply voltage."
},
{
"number": "92",
"name": "IOPF6",
"type": "bidirectional",
"description": "General-purpose I/O pin with internal pullup."
},
{
"number": "93",
"name": "RS",
"type": "bidirectional",
"description": "Device reset input and watchdog reset output (open-drain with 20 µA typical internal pullup); it is recommended to drive it with an open-drain device, and it is driven low for 128 CLKIN cycles during a watchdog reset."
},
{
"number": "94",
"name": "TCK",
"type": "input",
"description": "JTAG test clock with internal pullup."
},
{
"number": "95",
"name": "PDPINTB",
"type": "input",
"description": "Power drive protection interrupt input that places the EVB PWM outputs in high impedance on motor drive/power converter abnormalities; it is falling-edge sensitive."
},
{
"number": "96",
"name": "TDI",
"type": "input",
"description": "JTAG test data input with internal pullup; clocked into the selected register on a rising edge of TCK."
},
{
"number": "97",
"name": "VSSO",
"type": "power_in",
"description": "I/O buffer ground, digital logic and buffer ground reference."
},
{
"number": "98",
"name": "VDDO",
"type": "power_in",
"description": "I/O buffer supply, +3.3 V digital logic and buffer supply voltage."
},
{
"number": "99",
"name": "TDO",
"type": "output",
"description": "JTAG scan out; the contents of the selected register are shifted out on the falling edge of TCK."
},
{
"number": "100",
"name": "TMS",
"type": "input",
"description": "JTAG test-mode select with internal pullup; clocked into the TAP controller on the rising edge of TCK."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The LF2406A 100-pin PZ package does not bond out the external memory interface, so these signals hav; The PZ pinout diagram text in the extraction is garbled, so pin numbers were taken from the 2406A (1; TMS320LF2406APZAR is a Flash device, so VCCP (pin 40) must be connected to 5 V for Flash programming"
],
"pages_sent": 48,
"cost_usd": 0.3217,
"at": "2026-11-13T17:20:55"
},
"datasheet": {
"url": "https://www.ti.com/lit/ds/symlink/tms320lf2402a.pdf",
"pages": 141,
"sha256": "f19019cb4a75676b",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 100,
"described": 100,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "tms320lf2406apzar.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
16,
16,
1.5
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "51720097260ffba41c3062f85f67623721102fa535901c47cb555a1f444feeb3",
"checked": "2026-11-13",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "tms320lf2406apzar-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
16,
16,
1.5
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "511dfecc985191706641605fca3cc8f9e2ff36e902210de28c223613f1c88030",
"checked": "2026-11-13",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "PZ",
"source_page": 138,
"D": {
"nom_mm": 14,
"range_mm": [
13.8,
14.2
]
},
"E1": {
"nom_mm": 14,
"range_mm": [
13.8,
14.2
]
},
"E": {
"nom_mm": 16,
"range_mm": [
15.8,
16.2
]
},
"e": {
"nom_mm": 0.5,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 1.6,
"range_mm": [
null,
1.6
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "tms320lf2406apzar.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
},
"metadata": {
"specs": {
"Manufacturer": "Texas Instruments",
"Package": "LQFP-100(14x14)",
"Category": "Single Chip Microcomputer/Microcontroller",
"Pins": "100"
},
"characteristics": {
"version": 1,
"source": "datasheet",
"datasheet_sha256": "f19019cb4a75676b073a2c825a5819993e02a3232d6a23cd3e37d8da77bbc673",
"rows": [
{
"name": "Supply voltage VDD, PLLVCCA, VDDO, VCCA",
"symbol": "VDD",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 4.6,
"conditions": "with respect to VSS",
"source_page": 71,
"source": "datasheet"
},
{
"name": "VCCP range",
"symbol": "VCCP",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 5.5,
"conditions": "",
"source_page": 71,
"source": "datasheet"
},
{
"name": "Input voltage range",
"symbol": "VIN",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 4.6,
"conditions": "",
"source_page": 71,
"source": "datasheet"
},
{
"name": "Output voltage range, LF240xA",
"symbol": "VO",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 4.6,
"conditions": "LF240xA",
"source_page": 71,
"source": "datasheet"
},
{
"name": "Input clamp current",
"symbol": "IIK",
"kind": "absolute_maximum",
"unit": "mA",
"min": -20,
"typ": null,
"max": 20,
"conditions": "VIN < 0 or VIN > VCC",
"source_page": 71,
"source": "datasheet"
},
{
"name": "Output clamp current",
"symbol": "IOK",
"kind": "absolute_maximum",
"unit": "mA",
"min": -20,
"typ": null,
"max": 20,
"conditions": "VO < 0 or VO > VCC",
"source_page": 71,
"source": "datasheet"
},
{
"name": "Operating free-air temperature, A version",
"symbol": "TA",
"kind": "absolute_maximum",
"unit": "°C",
"min": -40,
"typ": null,
"max": 85,
"conditions": "A version",
"source_page": 71,
"source": "datasheet"
},
{
"name": "Junction temperature range",
"symbol": "TJ",
"kind": "absolute_maximum",
"unit": "°C",
"min": -40,
"typ": null,
"max": 150,
"conditions": "",
"source_page": 71,
"source": "datasheet"
},
{
"name": "Storage temperature range",
"symbol": "Tstg",
"kind": "absolute_maximum",
"unit": "°C",
"min": -65,
"typ": null,
"max": 150,
"conditions": "",
"source_page": 71,
"source": "datasheet"
},
{
"name": "Supply voltage VDD/VDDO",
"symbol": "VDD",
"kind": "recommended_operating",
"unit": "V",
"min": 3,
"typ": 3.3,
"max": 3.6,
"conditions": "VDDO = VDD ± 0.3 V",
"source_page": 71,
"source": "datasheet"
},
{
"name": "PLL supply voltage",
"symbol": "PLLVCCA",
"kind": "recommended_operating",
"unit": "V",
"min": 3,
"typ": 3.3,
"max": 3.6,
"conditions": "",
"source_page": 71,
"source": "datasheet"
},
{
"name": "ADC supply voltage",
"symbol": "VCCA",
"kind": "recommended_operating",
"unit": "V",
"min": 3,
"typ": 3.3,
"max": 3.6,
"conditions": "VCCA should not differ from VDD by more than 0.3 V",
"source_page": 71,
"source": "datasheet"
},
{
"name": "Flash programming supply voltage",
"symbol": "VCCP",
"kind": "recommended_operating",
"unit": "V",
"min": 4.75,
"typ": 5,
"max": 5.25,
"conditions": "",
"source_page": 71,
"source": "datasheet"
},
{
"name": "Device clock frequency (system clock)",
"symbol": "fCLKOUT",
"kind": "recommended_operating",
"unit": "MHz",
"min": 2,
"typ": null,
"max": 40,
"conditions": "",
"source_page": 71,
"source": "datasheet"
},
{
"name": "High level input voltage",
"symbol": "VIH",
"kind": "recommended_operating",
"unit": "V",
"min": 2,
"typ": null,
"max": null,
"conditions": "All inputs",
"source_page": 71,
"source": "datasheet"
},
{
"name": "High-level output source current, Group 1",
"symbol": "IOH",
"kind": "recommended_operating",
"unit": "mA",
"min": -2,
"typ": null,
"max": null,
"conditions": "Output pins Group 1; VOH = 2.4 V",
"source_page": 71,
"source": "datasheet"
},
{
"name": "High-level output source current, Group 2",
"symbol": "IOH",
"kind": "recommended_operating",
"unit": "mA",
"min": -4,
"typ": null,
"max": null,
"conditions": "Output pins Group 2; VOH = 2.4 V",
"source_page": 71,
"source": "datasheet"
},
{
"name": "High-level output source current, Group 3",
"symbol": "IOH",
"kind": "recommended_operating",
"unit": "mA",
"min": -8,
"typ": null,
"max": null,
"conditions": "Output pins Group 3; VOH = 2.4 V",
"source_page": 71,
"source": "datasheet"
},
{
"name": "Low-level output sink current, Group 1",
"symbol": "IOL",
"kind": "recommended_operating",
"unit": "mA",
"min": null,
"typ": null,
"max": 2,
"conditions": "Output pins Group 1; VOL = VOL MAX",
"source_page": 71,
"source": "datasheet"
},
{
"name": "Low-level output sink current, Group 2",
"symbol": "IOL",
"kind": "recommended_operating",
"unit": "mA",
"min": null,
"typ": null,
"max": 4,
"conditions": "Output pins Group 2; VOL = VOL MAX",
"source_page": 71,
"source": "datasheet"
},
{
"name": "Low-level output sink current, Group 3",
"symbol": "IOL",
"kind": "recommended_operating",
"unit": "mA",
"min": null,
"typ": null,
"max": 8,
"conditions": "Output pins Group 3; VOL = VOL MAX",
"source_page": 71,
"source": "datasheet"
},
{
"name": "Junction temperature",
"symbol": "TJ",
"kind": "recommended_operating",
"unit": "°C",
"min": -40,
"typ": 25,
"max": 150,
"conditions": "",
"source_page": 71,
"source": "datasheet"
},
{
"name": "High-level output voltage",
"symbol": "VOH",
"kind": "electrical",
"unit": "V",
"min": 2.4,
"typ": null,
"max": null,
"conditions": "VDD = 3.0 V, IOH = IOHMAX",
"source_page": 72,
"source": "datasheet"
},
{
"name": "Low-level output voltage",
"symbol": "VOL",
"kind": "electrical",
"unit": "V",
"min": null,
"typ": null,
"max": 0.4,
"conditions": "IOL = IOLMAX",
"source_page": 72,
"source": "datasheet"
},
{
"name": "Input current (low level), with pullup",
"symbol": "IIL",
"kind": "electrical",
"unit": "µA",
"min": -10,
"typ": -16,
"max": -30,
"conditions": "With pullup; VDD = 3.3 V, VIN = 0 V",
"source_page": 72,
"source": "datasheet"
},
{
"name": "Input current (low level), with pulldown",
"symbol": "IIL",
"kind": "electrical",
"unit": "µA",
"min": -2,
"typ": null,
"max": 2,
"conditions": "With pulldown; VDD = 3.3 V, VIN = 0 V",
"source_page": 72,
"source": "datasheet"
},
{
"name": "Input current (high level), with pullup",
"symbol": "IIH",
"kind": "electrical",
"unit": "µA",
"min": -2,
"typ": null,
"max": 2,
"conditions": "With pullup; VDD = 3.3 V, VIN = VDD",
"source_page": 72,
"source": "datasheet"
},
{
"name": "Input current (high level), with pulldown",
"symbol": "IIH",
"kind": "electrical",
"unit": "µA",
"min": 10,
"typ": 16,
"max": 30,
"conditions": "With pulldown; VDD = 3.3 V, VIN = VDD",
"source_page": 72,
"source": "datasheet"
},
{
"name": "Leakage current, high-impedance state (off-state)",
"symbol": "IOZ",
"kind": "electrical",
"unit": "µA",
"min": -2,
"typ": null,
"max": 2,
"conditions": "VO = VDD or 0 V",
"source_page": 72,
"source": "datasheet"
},
{
"name": "Input capacitance",
"symbol": "Ci",
"kind": "electrical",
"unit": "pF",
"min": null,
"typ": null,
"max": 2,
"conditions": "",
"source_page": 72,
"source": "datasheet"
},
{
"name": "Output capacitance",
"symbol": "Co",
"kind": "electrical",
"unit": "pF",
"min": null,
"typ": null,
"max": 3,
"conditions": "",
"source_page": 72,
"source": "datasheet"
},
{
"name": "Operational current, LF2406A",
"symbol": "IDD",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 95,
"max": 120,
"conditions": "40-MHz CLKOUT; test code in B0 RAM; all I/O pins floating",
"source_page": 72,
"source": "datasheet"
},
{
"name": "ADC module current, LF2406A",
"symbol": "ICCA",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 10,
"max": 22,
"conditions": "",
"source_page": 72,
"source": "datasheet"
},
{
"name": "Operational current, LPM0, LF2406A",
"symbol": "IDD",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 70,
"max": 80,
"conditions": "LPM0; clock to all peripherals is enabled",
"source_page": 73,
"source": "datasheet"
},
{
"name": "ADC module current, LPM0, LF2406A",
"symbol": "ICCA",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 10,
"max": 22,
"conditions": "LPM0; clock to all peripherals is enabled; no I/O pins are switching",
"source_page": 73,
"source": "datasheet"
},
{
"name": "Operational current, LPM1, LF2406A",
"symbol": "IDD",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 35,
"max": 45,
"conditions": "LPM1; clock to all peripherals is disabled",
"source_page": 73,
"source": "datasheet"
},
{
"name": "ADC module current, LPM1, LF2406A",
"symbol": "ICCA",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 0,
"max": 0,
"conditions": "LPM1; clock to all peripherals is disabled; no I/O pins are switching",
"source_page": 73,
"source": "datasheet"
},
{
"name": "Operational current, LPM2, LF2406A",
"symbol": "IDD",
"kind": "electrical",
"unit": "µA",
"min": null,
"typ": 200,
"max": 400,
"conditions": "LPM2; clock to all peripherals is disabled; Flash is powered down",
"source_page": 73,
"source": "datasheet"
},
{
"name": "ADC module current, LPM2, LF2406A",
"symbol": "ICCA",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 0,
"max": 0,
"conditions": "LPM2; Flash is powered down; input clock is disabled",
"source_page": 73,
"source": "datasheet"
},
{
"name": "ADC analog input reference current",
"symbol": "IADREFHI",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 0.75,
"max": 1.5,
"conditions": "",
"source_page": 108,
"source": "datasheet"
},
{
"name": "Analog input leakage",
"symbol": "IADCIN",
"kind": "electrical",
"unit": "µA",
"min": null,
"typ": null,
"max": 1,
"conditions": "",
"source_page": 108,
"source": "datasheet"
},
{
"name": "ADC operating frequency",
"symbol": "",
"kind": "electrical",
"unit": "MHz",
"min": 4,
"typ": null,
"max": 30,
"conditions": "",
"source_page": 107,
"source": "datasheet"
},
{
"name": "Differential nonlinearity error",
"symbol": "EDNL",
"kind": "electrical",
"unit": "LSB",
"min": null,
"typ": null,
"max": 2,
"conditions": "CLKOUT 30 MHz; VREFHI = VCCA, VREFLO = VSSA",
"source_page": 108,
"source": "datasheet"
},
{
"name": "Integral nonlinearity error",
"symbol": "EINL",
"kind": "electrical",
"unit": "LSB",
"min": null,
"typ": null,
"max": 2,
"conditions": "CLKOUT 30 MHz; VREFHI = VCCA, VREFLO = VSSA",
"source_page": 108,
"source": "datasheet"
},
{
"name": "Cycle time, ADC prescaled clock",
"symbol": "tc(AD)",
"kind": "timing",
"unit": "ns",
"min": 33.3,
"typ": null,
"max": null,
"conditions": "",
"source_page": 109,
"source": "datasheet"
},
{
"name": "Input clock frequency, resonator",
"symbol": "fx",
"kind": "timing",
"unit": "MHz",
"min": 4,
"typ": null,
"max": 13,
"conditions": "Resonator",
"source_page": 80,
"source": "datasheet"
},
{
"name": "Input clock frequency, crystal",
"symbol": "fx",
"kind": "timing",
"unit": "MHz",
"min": 4,
"typ": null,
"max": 20,
"conditions": "Crystal",
"source_page": 80,
"source": "datasheet"
},
{
"name": "Cycle time, CLKOUT ×4 mode",
"symbol": "tc(CO)",
"kind": "timing",
"unit": "ns",
"min": 25,
"typ": null,
"max": null,
"conditions": "PLL ×4 mode",
"source_page": 80,
"source": "datasheet"
},
{
"name": "Fall time, CLKOUT",
"symbol": "tf(CO)",
"kind": "timing",
"unit": "ns",
"min": null,
"typ": null,
"max": 4,
"conditions": "",
"source_page": 80,
"source": "datasheet"
},
{
"name": "Rise time, CLKOUT",
"symbol": "tr(CO)",
"kind": "timing",
"unit": "ns",
"min": null,
"typ": null,
"max": 4,
"conditions": "",
"source_page": 80,
"source": "datasheet"
},
{
"name": "Cycle time, XTAL1/CLKIN",
"symbol": "tc(Cl)",
"kind": "timing",
"unit": "ns",
"min": 250,
"typ": null,
"max": null,
"conditions": "",
"source_page": 80,
"source": "datasheet"
},
{
"name": "Fall time, XTAL1/CLKIN",
"symbol": "tf(Cl)",
"kind": "timing",
"unit": "ns",
"min": null,
"typ": null,
"max": 5,
"conditions": "",
"source_page": 80,
"source": "datasheet"
},
{
"name": "Rise time, XTAL1/CLKIN",
"symbol": "tr(Cl)",
"kind": "timing",
"unit": "ns",
"min": null,
"typ": null,
"max": 5,
"conditions": "",
"source_page": 80,
"source": "datasheet"
},
{
"name": "Pulse duration, XTAL1/CLKIN low as % of tc(Cl)",
"symbol": "tw(CIL)",
"kind": "timing",
"unit": "%",
"min": 40,
"typ": null,
"max": 60,
"conditions": "",
"source_page": 80,
"source": "datasheet"
},
{
"name": "Pulse duration, XTAL1/CLKIN high as % of tc(Cl)",
"symbol": "tw(CIH)",
"kind": "timing",
"unit": "%",
"min": 40,
"typ": null,
"max": 60,
"conditions": "",
"source_page": 80,
"source": "datasheet"
},
{
"name": "Junction-to-ambient thermal resistance, PZ package",
"symbol": "ΘJA",
"kind": "thermal",
"unit": "°C/W",
"min": null,
"typ": 42,
"max": null,
"conditions": "PZ package, typical",
"source_page": 126,
"source": "datasheet"
},
{
"name": "Junction-to-case thermal resistance, PZ package",
"symbol": "ΘJC",
"kind": "thermal",
"unit": "°C/W",
"min": null,
"typ": 8,
"max": null,
"conditions": "PZ package, typical",
"source_page": 126,
"source": "datasheet"
},
{
"name": "Junction-to-top of package thermal characterization, PZ package",
"symbol": "Ψjt",
"kind": "thermal",
"unit": "°C/W",
"min": null,
"typ": 0.5,
"max": null,
"conditions": "PZ package, typical",
"source_page": 126,
"source": "datasheet"
}
]
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"tms320lf2406apzar"
],
"discovery_pitch": "TMS320LF2406APZAR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"tms320lf2406apzar.kicad_sym",
"tms320lf2406apzar.kicad_mod",
"tms320lf2406apzar.glb",
"tms320lf2406apzar.step",
"tms320lf2406apzar.lbr",
"docs/hero.png",
"docs/tms320lf2406apzar-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"tms320lf2406apzar-hero.glb",
"tms320lf2406apzar-hero.overlay.json"
],
"visibility": {
"public": true
}
}