component
TMS320LF2406APZAR
Public Made by Adomby adom
Texas Instruments Microcontroller Units (MCUs/MPUs/SOCs), LQFP-100(14x14). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
c09a4d1
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793
{
"slug": "tms320lf2406apzar",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments Microcontroller Units (MCUs/MPUs/SOCs), LQFP-100(14x14). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"single chip microcomputer-microcontroller",
"tms320lf2406apzar",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"tms320lf2406apzar.kicad_sym",
"tms320lf2406apzar.kicad_mod",
"tms320lf2406apzar.glb",
"tms320lf2406apzar.step",
"tms320lf2406apzar.lbr",
"docs/hero.png",
"docs/tms320lf2406apzar-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"tms320lf2406apzar-hero.glb",
"tms320lf2406apzar-hero.overlay.json"
],
"component": {
"mpn": "TMS320LF2406APZAR",
"manufacturer": "Texas Instruments",
"package": "LQFP-100(14x14)",
"pin_count": 100,
"category": "Single Chip Microcomputer/Microcontroller",
"subcategory": "Microcontroller Units (MCUs/MPUs/SOCs)",
"datasheet": "https://www.ti.com/lit/ds/symlink/tms320lf2402a.pdf",
"parts": {
"symbol": "tms320lf2406apzar.kicad_sym",
"footprint": "tms320lf2406apzar.kicad_mod",
"model_3d": "tms320lf2406apzar-hero.glb",
"model_3d_plain": "tms320lf2406apzar.glb",
"model_3d_step": "tms320lf2406apzar-etched.step",
"model_3d_step_plain": "tms320lf2406apzar.step",
"lbr": "tms320lf2406apzar.lbr"
},
"distributor_links": {
"lcsc": "C2053958",
"digikey": "296-26861-2-ND",
"mouser": "595-TMS320LF2406ZAR"
},
"distributor_check": {
"checked_at": "2026-11-13T17:21:12Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-26861-2-ND",
"status": "found"
},
"mouser": {
"pn": "595-TMS320LF2406ZAR",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "TRST",
"type": "input",
"description": "JTAG test reset with internal pulldown; it must be maintained low during normal device operation and pullup resistors must not be used on it."
},
{
"number": "2",
"name": "TDIRB/IOPF4",
"type": "bidirectional",
"description": "Counting direction input for the EVB general-purpose timer or GPIO; TDIRB = 1 selects upward counting and TDIRB = 0 selects downward counting."
},
{
"number": "3",
"name": "VSSO",
"type": "power_in",
"description": "I/O buffer ground and digital logic/buffer ground reference; all power supply pins must be connected for proper operation."
},
{
"number": "4",
"name": "VDDO",
"type": "power_in",
"description": "I/O buffer supply, +3.3 V digital logic and buffer supply voltage."
},
{
"number": "5",
"name": "T4PWM/T4CMP/IOPF3",
"type": "bidirectional",
"description": "Timer 4 compare output (EVB) or GPIO."
},
{
"number": "6",
"name": "PDPINTA",
"type": "input",
"description": "Power drive protection interrupt input that places the EVA PWM outputs in high impedance on motor drive/power converter abnormalities such as overvoltage or overcurrent; it is falling-edge sensitive."
},
{
"number": "7",
"name": "T3PWM/T3CMP/IOPF2",
"type": "bidirectional",
"description": "Timer 3 compare output (EVB) or GPIO."
},
{
"number": "8",
"name": "PLLF2",
"type": "passive",
"description": "PLL loop filter input 2, connected to the external loop filter circuit (R1, C1, C2)."
},
{
"number": "9",
"name": "PLLF",
"type": "passive",
"description": "PLL loop filter input 1, connected to the external loop filter circuit (R1, C1, C2)."
},
{
"number": "10",
"name": "PLLVCCA",
"type": "power_in",
"description": "PLL supply, 3.3 V."
},
{
"number": "11",
"name": "TDIRA/IOPB6",
"type": "bidirectional",
"description": "Counting direction input for the EVA general-purpose timer or GPIO; TDIRA = 1 selects upward counting and TDIRA = 0 selects downward counting."
},
{
"number": "12",
"name": "T1PWM/T1CMP/IOPB4",
"type": "bidirectional",
"description": "Timer 1 compare output (EVA) or GPIO."
},
{
"number": "13",
"name": "T2PWM/T2CMP/IOPB5",
"type": "bidirectional",
"description": "Timer 2 compare output (EVA) or GPIO."
},
{
"number": "14",
"name": "IOPC0",
"type": "bidirectional",
"description": "General-purpose I/O (shared with W/R); on the 2406A, W/R mode is not functional, so MCRB.0 must be set to 0 before the pin is used as IOPC0."
},
{
"number": "15",
"name": "XINT2/ADCSOC/IOPD0",
"type": "bidirectional",
"description": "External user interrupt 2 and external ADC start-of-conversion input, or GPIO; edge-sensitive with programmable polarity."
},
{
"number": "16",
"name": "XINT1/IOPA2",
"type": "bidirectional",
"description": "External user interrupt 1 or GPIO; edge-sensitive with programmable polarity."
},
{
"number": "17",
"name": "SCITXD/IOPA0",
"type": "bidirectional",
"description": "SCI asynchronous serial port transmit data or GPIO."
},
{
"number": "18",
"name": "SCIRXD/IOPA1",
"type": "bidirectional",
"description": "SCI asynchronous serial port receive data or GPIO."
},
{
"number": "19",
"name": "VSS",
"type": "power_in",
"description": "Core ground, digital logic ground reference."
},
{
"number": "20",
"name": "VDD",
"type": "power_in",
"description": "Core supply, +3.3 V digital logic supply voltage."
},
{
"number": "21",
"name": "SPISIMO/IOPC2",
"type": "bidirectional",
"description": "SPI slave in, master out, or GPIO."
},
{
"number": "22",
"name": "SPISOMI/IOPC3",
"type": "bidirectional",
"description": "SPI slave out, master in, or GPIO."
},
{
"number": "23",
"name": "SPISTE/IOPC5",
"type": "bidirectional",
"description": "SPI slave transmit enable (optional) or GPIO."
},
{
"number": "24",
"name": "SPICLK/IOPC4",
"type": "bidirectional",
"description": "SPI clock or GPIO."
},
{
"number": "25",
"name": "TMS2",
"type": "input",
"description": "JTAG test-mode select 2 with internal pullup, for test and emulation only; it may be left unconnected in user applications, and if PLL bypass is desired TMS2, TMS and TRST must be held low during reset."
},
{
"number": "26",
"name": "TCLKINA/IOPB7",
"type": "bidirectional",
"description": "External clock input for the EVA general-purpose timer or GPIO; the timer can also use the internal device clock."
},
{
"number": "27",
"name": "PWM12/IOPE6",
"type": "bidirectional",
"description": "Compare/PWM output pin #12 (EVB) or GPIO."
},
{
"number": "28",
"name": "PWM6/IOPB3",
"type": "bidirectional",
"description": "Compare/PWM output pin #6 (EVA) or GPIO."
},
{
"number": "29",
"name": "VSSO",
"type": "power_in",
"description": "I/O buffer ground, digital logic and buffer ground reference."
},
{
"number": "30",
"name": "VDDO",
"type": "power_in",
"description": "I/O buffer supply, +3.3 V digital logic and buffer supply voltage."
},
{
"number": "31",
"name": "PWM5/IOPB2",
"type": "bidirectional",
"description": "Compare/PWM output pin #5 (EVA) or GPIO."
},
{
"number": "32",
"name": "PWM11/IOPE5",
"type": "bidirectional",
"description": "Compare/PWM output pin #11 (EVB) or GPIO."
},
{
"number": "33",
"name": "PWM4/IOPB1",
"type": "bidirectional",
"description": "Compare/PWM output pin #4 (EVA) or GPIO."
},
{
"number": "34",
"name": "VSS",
"type": "power_in",
"description": "Core ground, digital logic ground reference."
},
{
"number": "35",
"name": "VDD",
"type": "power_in",
"description": "Core supply, +3.3 V digital logic supply voltage."
},
{
"number": "36",
"name": "PWM3/IOPB0",
"type": "bidirectional",
"description": "Compare/PWM output pin #3 (EVA) or GPIO."
},
{
"number": "37",
"name": "PWM2/IOPA7",
"type": "bidirectional",
"description": "Compare/PWM output pin #2 (EVA) or GPIO."
},
{
"number": "38",
"name": "PWM10/IOPE4",
"type": "bidirectional",
"description": "Compare/PWM output pin #10 (EVB) or GPIO."
},
{
"number": "39",
"name": "PWM1/IOPA6",
"type": "bidirectional",
"description": "Compare/PWM output pin #1 (EVA) or GPIO."
},
{
"number": "40",
"name": "VCCP (5V)",
"type": "power_in",
"description": "Flash programming voltage; must be connected to a 5-V supply for Flash programming, may be tied to 5 V or GND during normal operation, must not be left floating, and no current-limiting resistor may be used in series."
},
{
"number": "41",
"name": "PWM9/IOPE3",
"type": "bidirectional",
"description": "Compare/PWM output pin #9 (EVB) or GPIO."
},
{
"number": "42",
"name": "TP1",
"type": "unconnected",
"description": "Test pin 1; do not connect."
},
{
"number": "43",
"name": "PWM8/IOPE2",
"type": "bidirectional",
"description": "Compare/PWM output pin #8 (EVB) or GPIO."
},
{
"number": "44",
"name": "TP2",
"type": "unconnected",
"description": "Test pin 2; do not connect."
},
{
"number": "45",
"name": "PWM7/IOPE1",
"type": "bidirectional",
"description": "Compare/PWM output pin #7 (EVB) or GPIO."
},
{
"number": "46",
"name": "VSSO",
"type": "power_in",
"description": "I/O buffer ground, digital logic and buffer ground reference."
},
{
"number": "47",
"name": "VDDO",
"type": "power_in",
"description": "I/O buffer supply, +3.3 V digital logic and buffer supply voltage."
},
{
"number": "48",
"name": "CAP6/IOPF1",
"type": "bidirectional",
"description": "Capture input #6 (EVB) or GPIO."
},
{
"number": "49",
"name": "CANRX/IOPC7",
"type": "bidirectional",
"description": "CAN receive data or GPIO."
},
{
"number": "50",
"name": "CANTX/IOPC6",
"type": "bidirectional",
"description": "CAN transmit data or GPIO."
},
{
"number": "51",
"name": "CLKOUT/IOPE0",
"type": "bidirectional",
"description": "Clock output (CPU CLKOUT or watchdog clock WDCLK, selected by the CLKSRC bit of SCSR) or GPIO."
},
{
"number": "52",
"name": "CAP3/IOPA5",
"type": "bidirectional",
"description": "Capture input #3 (EVA) or GPIO."
},
{
"number": "53",
"name": "VSSO",
"type": "power_in",
"description": "I/O buffer ground, digital logic and buffer ground reference."
},
{
"number": "54",
"name": "VDDO",
"type": "power_in",
"description": "I/O buffer supply, +3.3 V digital logic and buffer supply voltage."
},
{
"number": "55",
"name": "CAP2/QEP2/IOPA4",
"type": "bidirectional",
"description": "Capture input #2 / quadrature encoder pulse input #2 (EVA) or GPIO."
},
{
"number": "56",
"name": "CAP5/QEP4/IOPF0",
"type": "bidirectional",
"description": "Capture input #5 / quadrature encoder pulse input #4 (EVB) or GPIO."
},
{
"number": "57",
"name": "CAP1/QEP1/IOPA3",
"type": "bidirectional",
"description": "Capture input #1 / quadrature encoder pulse input #1 (EVA) or GPIO."
},
{
"number": "58",
"name": "VSS",
"type": "power_in",
"description": "Core ground, digital logic ground reference."
},
{
"number": "59",
"name": "VDD",
"type": "power_in",
"description": "Core supply, +3.3 V digital logic supply voltage."
},
{
"number": "60",
"name": "CAP4/QEP3/IOPE7",
"type": "bidirectional",
"description": "Capture input #4 / quadrature encoder pulse input #3 (EVB) or GPIO."
},
{
"number": "61",
"name": "EMU0",
"type": "bidirectional",
"description": "Emulator I/O #0 with internal pullup; when TRST is driven high it is used as an interrupt to or from the emulator and is defined as input/output through the JTAG scan."
},
{
"number": "62",
"name": "EMU1/OFF",
"type": "bidirectional",
"description": "Emulator pin 1 with internal pullup; when TRST is driven low this pin is configured as OFF, and when active low it puts all output drivers in the high-impedance state (testing and emulation only)."
},
{
"number": "63",
"name": "VSSO",
"type": "power_in",
"description": "I/O buffer ground, digital logic and buffer ground reference."
},
{
"number": "64",
"name": "VDDO",
"type": "power_in",
"description": "I/O buffer supply, +3.3 V digital logic and buffer supply voltage."
},
{
"number": "65",
"name": "ADCIN15",
"type": "input",
"description": "Analog input #15 to the ADC."
},
{
"number": "66",
"name": "ADCIN07",
"type": "input",
"description": "Analog input #7 to the ADC."
},
{
"number": "67",
"name": "ADCIN06",
"type": "input",
"description": "Analog input #6 to the ADC."
},
{
"number": "68",
"name": "ADCIN14",
"type": "input",
"description": "Analog input #14 to the ADC."
},
{
"number": "69",
"name": "ADCIN05",
"type": "input",
"description": "Analog input #5 to the ADC."
},
{
"number": "70",
"name": "ADCIN04",
"type": "input",
"description": "Analog input #4 to the ADC."
},
{
"number": "71",
"name": "ADCIN13",
"type": "input",
"description": "Analog input #13 to the ADC."
},
{
"number": "72",
"name": "ADCIN03",
"type": "input",
"description": "Analog input #3 to the ADC."
},
{
"number": "73",
"name": "ADCIN12",
"type": "input",
"description": "Analog input #12 to the ADC."
},
{
"number": "74",
"name": "ADCIN02",
"type": "input",
"description": "Analog input #2 to the ADC."
},
{
"number": "75",
"name": "ADCIN11",
"type": "input",
"description": "Analog input #11 to the ADC."
},
{
"number": "76",
"name": "ADCIN10",
"type": "input",
"description": "Analog input #10 to the ADC."
},
{
"number": "77",
"name": "ADCIN01",
"type": "input",
"description": "Analog input #1 to the ADC."
},
{
"number": "78",
"name": "ADCIN09",
"type": "input",
"description": "Analog input #9 to the ADC."
},
{
"number": "79",
"name": "ADCIN00",
"type": "input",
"description": "Analog input #0 to the ADC."
},
{
"number": "80",
"name": "ADCIN08",
"type": "input",
"description": "Analog input #8 to the ADC."
},
{
"number": "81",
"name": "VREFLO",
"type": "input",
"description": "ADC analog low-voltage reference input."
},
{
"number": "82",
"name": "VREFHI",
"type": "input",
"description": "ADC analog high-voltage reference input."
},
{
"number": "83",
"name": "VCCA",
"type": "power_in",
"description": "Analog supply voltage for the ADC, 3.3 V; it is highly recommended to isolate VCCA from the digital supply for ADC accuracy and noise immunity."
},
{
"number": "84",
"name": "VSSA",
"type": "power_in",
"description": "Analog ground reference for the ADC; it is highly recommended to isolate VSSA from digital ground."
},
{
"number": "85",
"name": "BIO/IOPC1",
"type": "bidirectional",
"description": "Branch control input polled by the BCND instruction (branch executed if low); if not used it should be pulled high, and it can be used as GPIO if not used as branch control input."
},
{
"number": "86",
"name": "BOOT_EN/XF",
"type": "bidirectional",
"description": "Boot ROM enable sampled as input during reset, then driven as the XF output (driven high after reset); it must be driven with a passive circuit only."
},
{
"number": "87",
"name": "XTAL1/CLKIN",
"type": "input",
"description": "PLL oscillator input: crystal input or clock source input to the PLL, with input frequency 4-20 MHz for crystal or external clock with PLL."
},
{
"number": "88",
"name": "XTAL2",
"type": "output",
"description": "Crystal output (PLL oscillator output); it goes to the high-impedance state when EMU1/OFF is active low."
},
{
"number": "89",
"name": "TCLKINB/IOPF5",
"type": "bidirectional",
"description": "External clock input for the EVB general-purpose timer or GPIO; the timer can also use the internal device clock."
},
{
"number": "90",
"name": "VSS",
"type": "power_in",
"description": "Core ground, digital logic ground reference."
},
{
"number": "91",
"name": "VDD",
"type": "power_in",
"description": "Core supply, +3.3 V digital logic supply voltage."
},
{
"number": "92",
"name": "IOPF6",
"type": "bidirectional",
"description": "General-purpose I/O pin with internal pullup."
},
{
"number": "93",
"name": "RS",
"type": "bidirectional",
"description": "Device reset input and watchdog reset output (open-drain with 20 µA typical internal pullup); it is recommended to drive it with an open-drain device, and it is driven low for 128 CLKIN cycles during a watchdog reset."
},
{
"number": "94",
"name": "TCK",
"type": "input",
"description": "JTAG test clock with internal pullup."
},
{
"number": "95",
"name": "PDPINTB",
"type": "input",
"description": "Power drive protection interrupt input that places the EVB PWM outputs in high impedance on motor drive/power converter abnormalities; it is falling-edge sensitive."
},
{
"number": "96",
"name": "TDI",
"type": "input",
"description": "JTAG test data input with internal pullup; clocked into the selected register on a rising edge of TCK."
},
{
"number": "97",
"name": "VSSO",
"type": "power_in",
"description": "I/O buffer ground, digital logic and buffer ground reference."
},
{
"number": "98",
"name": "VDDO",
"type": "power_in",
"description": "I/O buffer supply, +3.3 V digital logic and buffer supply voltage."
},
{
"number": "99",
"name": "TDO",
"type": "output",
"description": "JTAG scan out; the contents of the selected register are shifted out on the falling edge of TCK."
},
{
"number": "100",
"name": "TMS",
"type": "input",
"description": "JTAG test-mode select with internal pullup; clocked into the TAP controller on the rising edge of TCK."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The LF2406A 100-pin PZ package does not bond out the external memory interface, so these signals hav; The PZ pinout diagram text in the extraction is garbled, so pin numbers were taken from the 2406A (1; TMS320LF2406APZAR is a Flash device, so VCCP (pin 40) must be connected to 5 V for Flash programming"
],
"pages_sent": 48,
"cost_usd": 0.3217,
"at": "2026-11-13T17:20:55"
},
"datasheet": {
"url": "https://www.ti.com/lit/ds/symlink/tms320lf2402a.pdf",
"pages": 141,
"sha256": "f19019cb4a75676b",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 100,
"described": 100,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "tms320lf2406apzar.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
16.0,
16.0,
1.5
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "51720097260ffba41c3062f85f67623721102fa535901c47cb555a1f444feeb3",
"checked": "2026-11-13",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "tms320lf2406apzar-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
16.0,
16.0,
1.5
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "511dfecc985191706641605fca3cc8f9e2ff36e902210de28c223613f1c88030",
"checked": "2026-11-13",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "PZ",
"source_page": 138,
"D": {
"nom_mm": 14.0,
"range_mm": [
13.8,
14.2
]
},
"E1": {
"nom_mm": 14.0,
"range_mm": [
13.8,
14.2
]
},
"E": {
"nom_mm": 16.0,
"range_mm": [
15.8,
16.2
]
},
"e": {
"nom_mm": 0.5,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 1.6,
"range_mm": [
null,
1.6
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "tms320lf2406apzar.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}