main
Ray
Publish 0.1.0
427283f
TMP75CIDGKT
Texas Instruments · Temperature Sensors · VSSOP-8
TMP75CIDGKT from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SDA | bidirectional | Serial data; open-drain output that requires a pull-up resistor. |
| 2 | SCL | input | Serial clock input. |
| 3 | ALERT | output | Overtemperature alert; open-drain output that requires a pull-up resistor. |
| 4 | GND | power_in | Ground. |
| 5 | A2 | input | Address select; connect to GND or VS. |
| 6 | A1 | input | Address select; connect to GND or VS. |
| 7 | A0 | input | Address select; connect to GND or VS. |
| 8 | VS | power_in | Supply voltage, 1.4 V to 3.6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VS | 4 | V | 4 | |||
| Input voltage SDA, SCL, ALERT, A2, A1 | -0.3 | 4 | V | 4 | |||
| Input voltage A0 | -0.3 | V | 4 | ||||
| Sink current SDA, ALERT | 10 | mA | 4 | ||||
| Operating junction temperature | -55 | 150 | °C | 4 | |||
| Storage temperature range | Tstg | -60 | 150 | °C | 4 | ||
| Electrostatic discharge, human body model (HBM) | V(ESD) | -2000 | 2000 | V | Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins | 4 | |
| Electrostatic discharge, charged device model (CDM) | V(ESD) | -1000 | 1000 | V | Charged device model (CDM), per JEDEC JESD22-C101, all pins | 4 | |
| Supply voltage | 1.4 | 1.8 | 3.6 | V | 4 | ||
| Operating free-air temperature | TA | -55 | 125 | °C | 4 | ||
| Temperature range | -55 | 125 | °C | 5 | |||
| Temperature accuracy (error) | -1 | 0.25 | 1 | °C | 0°C to +70°C | 5 | |
| Temperature accuracy (error) | -2 | 0.5 | 2 | °C | -20°C to +85°C | 5 | |
| Temperature accuracy (error) | -3 | 1 | 3 | °C | -55°C to +125°C | 5 | |
| Low-level input voltage | VIL | -0.3 | V | 5 | |||
| Low-level output voltage | VOL | 0.4 | V | VS ≥ 2 V, IOUT = 3 mA | 5 | ||
| Input current | IIN | 1 | μA | 0 V < VIN < (VS) + 0.3 V | 5 | ||
| Conversion time | 20 | 27 | 35 | ms | One-shot mode | 5 | |
| Bus timeout time | 16 | 22 | 29 | ms | 5 | ||
| Operating supply range | 1.4 | 3.6 | V | 5 | |||
| Quiescent current | IQ | 15 | 37 | μA | Serial bus inactive | 5 | |
| Quiescent current | IQ | 25 | μA | Serial bus active, SCL frequency = 400 kHz | 5 | ||
| Quiescent current | IQ | 95 | μA | Serial bus active, SCL frequency = 3.4 MHz | 5 | ||
| Shutdown current | ISD | 0.3 | 8 | μA | Serial bus inactive | 5 | |
| Shutdown current | ISD | 10 | μA | Serial bus active, SCL frequency = 400 kHz | 5 | ||
| Shutdown current | ISD | 80 | μA | Serial bus active, SCL frequency = 3.4 MHz | 5 | ||
| Junction-to-ambient thermal resistance (DGK, VSSOP) | RθJA | 188.1 | °C/W | DGK (VSSOP) package | 4 | ||
| Junction-to-case (top) thermal resistance (DGK, VSSOP) | RθJC(top) | 79.1 | °C/W | DGK (VSSOP) package | 4 | ||
| Junction-to-board thermal resistance (DGK, VSSOP) | RθJB | 109.6 | °C/W | DGK (VSSOP) package | 4 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
TMP75CIDGKT - Footprint:
Package_SO:VSSOP-8_3x3mm_P0.65mm - 3D model: VSSOP-8, generated on the KiCad land (body 3 x 3 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tmp75cidgkt-etched.step/tmp75cidgkt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tmp75cidgkt.step/tmp75cidgkt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (33 pp, sha256
b9600a80b265d712, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# TMP75CIDGKT
**Texas Instruments** · Temperature Sensors · VSSOP-8
TMP75CIDGKT from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SDA | bidirectional | Serial data; open-drain output that requires a pull-up resistor. |
| 2 | SCL | input | Serial clock input. |
| 3 | ALERT | output | Overtemperature alert; open-drain output that requires a pull-up resistor. |
| 4 | GND | power_in | Ground. |
| 5 | A2 | input | Address select; connect to GND or VS. |
| 6 | A1 | input | Address select; connect to GND or VS. |
| 7 | A0 | input | Address select; connect to GND or VS. |
| 8 | VS | power_in | Supply voltage, 1.4 V to 3.6 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Sensors |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VS | | | 4 | V | | 4 |
| Input voltage SDA, SCL, ALERT, A2, A1 | | -0.3 | | 4 | V | | 4 |
| Input voltage A0 | | -0.3 | | | V | | 4 |
| Sink current SDA, ALERT | | | | 10 | mA | | 4 |
| Operating junction temperature | | -55 | | 150 | °C | | 4 |
| Storage temperature range | Tstg | -60 | | 150 | °C | | 4 |
| Electrostatic discharge, human body model (HBM) | V(ESD) | -2000 | | 2000 | V | Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins | 4 |
| Electrostatic discharge, charged device model (CDM) | V(ESD) | -1000 | | 1000 | V | Charged device model (CDM), per JEDEC JESD22-C101, all pins | 4 |
| Supply voltage | | 1.4 | 1.8 | 3.6 | V | | 4 |
| Operating free-air temperature | TA | -55 | | 125 | °C | | 4 |
| Temperature range | | -55 | | 125 | °C | | 5 |
| Temperature accuracy (error) | | -1 | 0.25 | 1 | °C | 0°C to +70°C | 5 |
| Temperature accuracy (error) | | -2 | 0.5 | 2 | °C | -20°C to +85°C | 5 |
| Temperature accuracy (error) | | -3 | 1 | 3 | °C | -55°C to +125°C | 5 |
| Low-level input voltage | VIL | -0.3 | | | V | | 5 |
| Low-level output voltage | VOL | | | 0.4 | V | VS ≥ 2 V, IOUT = 3 mA | 5 |
| Input current | IIN | | | 1 | μA | 0 V < VIN < (VS) + 0.3 V | 5 |
| Conversion time | | 20 | 27 | 35 | ms | One-shot mode | 5 |
| Bus timeout time | | 16 | 22 | 29 | ms | | 5 |
| Operating supply range | | 1.4 | | 3.6 | V | | 5 |
| Quiescent current | IQ | | 15 | 37 | μA | Serial bus inactive | 5 |
| Quiescent current | IQ | | | 25 | μA | Serial bus active, SCL frequency = 400 kHz | 5 |
| Quiescent current | IQ | | | 95 | μA | Serial bus active, SCL frequency = 3.4 MHz | 5 |
| Shutdown current | ISD | | 0.3 | 8 | μA | Serial bus inactive | 5 |
| Shutdown current | ISD | | | 10 | μA | Serial bus active, SCL frequency = 400 kHz | 5 |
| Shutdown current | ISD | | | 80 | μA | Serial bus active, SCL frequency = 3.4 MHz | 5 |
| Junction-to-ambient thermal resistance (DGK, VSSOP) | RθJA | | 188.1 | | °C/W | DGK (VSSOP) package | 4 |
| Junction-to-case (top) thermal resistance (DGK, VSSOP) | RθJC(top) | | 79.1 | | °C/W | DGK (VSSOP) package | 4 |
| Junction-to-board thermal resistance (DGK, VSSOP) | RθJB | | 109.6 | | °C/W | DGK (VSSOP) package | 4 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `TMP75CIDGKT`
- Footprint: `Package_SO:VSSOP-8_3x3mm_P0.65mm`
- 3D model: VSSOP-8, generated on the KiCad land (body 3 x 3 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `tmp75cidgkt-etched.step` / `tmp75cidgkt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tmp75cidgkt.step` / `tmp75cidgkt.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tmp75c.pdf) (33 pp, sha256 `b9600a80b265d712`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/tmp75cidgkt-datasheet.pdf)