main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tmp75cidgkt: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tmp75cidgkt-etched.glb tmp75cidgkt: factory component page (tier=mfr) · Ray
tmp75cidgkt-etched.step tmp75cidgkt: factory component page (tier=mfr) · Ray
tmp75cidgkt-hero.glb tmp75cidgkt: hero GLB from the etched model (keeps the MPN mark) · Ray
tmp75cidgkt-hero.overlay.json tmp75cidgkt: hero GLB from the etched model (keeps the MPN mark) · Ray
tmp75cidgkt.glb Publish 0.1.0 · Ray
tmp75cidgkt.kicad_mod Publish 0.1.0 · Ray
tmp75cidgkt.kicad_sym Publish 0.1.0 · Ray
tmp75cidgkt.lbr Publish 0.1.0 · Ray
tmp75cidgkt.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

TMP75CIDGKT

Texas Instruments · Temperature Sensors · VSSOP-8

TMP75CIDGKT from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 SDA bidirectional Serial data; open-drain output that requires a pull-up resistor.
2 SCL input Serial clock input.
3 ALERT output Overtemperature alert; open-drain output that requires a pull-up resistor.
4 GND power_in Ground.
5 A2 input Address select; connect to GND or VS.
6 A1 input Address select; connect to GND or VS.
7 A0 input Address select; connect to GND or VS.
8 VS power_in Supply voltage, 1.4 V to 3.6 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Sensors
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VS 4 V 4
Input voltage SDA, SCL, ALERT, A2, A1 -0.3 4 V 4
Input voltage A0 -0.3 V 4
Sink current SDA, ALERT 10 mA 4
Operating junction temperature -55 150 °C 4
Storage temperature range Tstg -60 150 °C 4
Electrostatic discharge, human body model (HBM) V(ESD) -2000 2000 V Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins 4
Electrostatic discharge, charged device model (CDM) V(ESD) -1000 1000 V Charged device model (CDM), per JEDEC JESD22-C101, all pins 4
Supply voltage 1.4 1.8 3.6 V 4
Operating free-air temperature TA -55 125 °C 4
Temperature range -55 125 °C 5
Temperature accuracy (error) -1 0.25 1 °C 0°C to +70°C 5
Temperature accuracy (error) -2 0.5 2 °C -20°C to +85°C 5
Temperature accuracy (error) -3 1 3 °C -55°C to +125°C 5
Low-level input voltage VIL -0.3 V 5
Low-level output voltage VOL 0.4 V VS ≥ 2 V, IOUT = 3 mA 5
Input current IIN 1 μA 0 V < VIN < (VS) + 0.3 V 5
Conversion time 20 27 35 ms One-shot mode 5
Bus timeout time 16 22 29 ms 5
Operating supply range 1.4 3.6 V 5
Quiescent current IQ 15 37 μA Serial bus inactive 5
Quiescent current IQ 25 μA Serial bus active, SCL frequency = 400 kHz 5
Quiescent current IQ 95 μA Serial bus active, SCL frequency = 3.4 MHz 5
Shutdown current ISD 0.3 8 μA Serial bus inactive 5
Shutdown current ISD 10 μA Serial bus active, SCL frequency = 400 kHz 5
Shutdown current ISD 80 μA Serial bus active, SCL frequency = 3.4 MHz 5
Junction-to-ambient thermal resistance (DGK, VSSOP) RθJA 188.1 °C/W DGK (VSSOP) package 4
Junction-to-case (top) thermal resistance (DGK, VSSOP) RθJC(top) 79.1 °C/W DGK (VSSOP) package 4
Junction-to-board thermal resistance (DGK, VSSOP) RθJB 109.6 °C/W DGK (VSSOP) package 4

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TMP75CIDGKT
  • Footprint: Package_SO:VSSOP-8_3x3mm_P0.65mm
  • 3D model: VSSOP-8, generated on the KiCad land (body 3 x 3 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tmp75cidgkt-etched.step / tmp75cidgkt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tmp75cidgkt.step / tmp75cidgkt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (33 pp, sha256 b9600a80b265d712, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF