main
History Download
Ray Publish 0.1.0 ff335ff

TMI6030-33

TMI · Linear Voltage Regulators (LDO) · SOT-23-5

TMI6030-33 from TMI, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input supply of the LDO, with an input voltage range of 2.5V to 5.5V.
2 GND power_in Signal ground of the LDO.
3 EN input Enable pin: the device is disabled when EN is at ground or below 0.4V and enabled when EN is 1.5V or above, and this pin must not be floated.
4 BP passive Bypass pin for the fixed-output version, which may take a 10nF ceramic capacitor to reduce output noise or be left floating.
5 VOUT power_out Output of the LDO, with a current limit typically 600mA and a minimum of 450mA, and a maximum output current of 300mA.

Key specifications

Parameter Value
Manufacturer TMI
Package SOT-23-5
Category Power Management ICs
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage Range VIN 2.5 5.5 V 6
Quiescent Current IQ 35 50 70 μA VEN=2.5V, IOUT=0mA 6
Shutdown Current ISHDN 0.1 1 μA VEN=0V 6
Enable High Voltage VENH 0.85 1 1.15 V All temperature range 6
Enable Low Voltage VENL 0.55 0.75 0.95 V All temperature range 6
EN Input Current IEN -1 0.2 1 μA VIN=3.5V, VEN=3.5V or 0V 6
Output Voltage Accuracy VOUT -2 2 % VIN=VOUT+1V, IOUT=10mA 6
Output Voltage Accuracy over temperature VOUT -3 3 % VIN=VOUT+1V, IOUT=10mA, TA=-40°C to +85°C 6
Output Line Regulation VLNR 0.01 0.1 %/V VOUT+0.5V<VIN<5.5V, IOUT=10mA 6
Dropout Voltage VDROP 320 350 mV IOUT=300mA 6
Maximum Output Current IOUTMAX 300 mA 6
Current Limit Ilimit 450 600 mA 6
Output Short Current Limit Ishort 110 mA VFB or VOUT = 0V 6
Output Load Regulation VLDR 3 mV 1mA<IOUT<300mA, VIN=VNOM+1.0V 6
Power Supply Ripple Rejection PSRR 70 dB VIN=Vnom+1VP-P, f=1kHz, ILOAD=10mA, BP is floating 6
Start-up Time TST 40 μs VIN=3.5V, VOUT=2.5V 6
Resistance of Auto-Discharge RAD 130 Ω 6
Thermal Shutdown Temperature TSD 160 °C No Load, VIN=VEN=5V 6
Thermal Shutdown Hysteresis TSDHYS 20 °C No Load, VIN=VEN=5V 6
VIN, EN Input Voltage Range VIN, EN -0.3 6 V 2
All other pins Voltage Range -0.3 V Maximum printed as VIN+0.3 2
Junction Temperature 160 °C 2
Storage Temperature Range -65 150 °C 2
Junction-to-ambient Thermal Resistance 220 °C/W SOT23-5 package 2
Junction-to-case(top) Thermal Resistance 62 °C/W SOT23-5 package 2
Power Dissipation 0.6 W SOT23-5 package 2
Lead Temperature Soldering 260 °C 10 s 2
ESD Human Body Model VESD_HBM -2000 2000 V Human Body Model for all pins, JEDEC JS-001 2
ESD Charged Device Model VESD_CDM -2000 2000 V Charged Device Model for all pins, JEDEC JS-001 2
Voltage Range IN 2.5 5.5 V 2
Operation Junction Temperature TJ -40 125 °C 2
Operation Ambient Temperature TA -40 85 °C 2

CAD (KiCad official)

  • Symbol: TMI6030-33
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tmi6030-33-etched.step / tmi6030-33-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tmi6030-33.step / tmi6030-33.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TMI datasheet (14 pp, sha256 9ac63d6fe1d301c1, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF