Generated by kicad-footprint-generator · KiCad file format 20260206
TMI6030-33
TMI · Linear Voltage Regulators (LDO) · SOT-23-5
TMI6030-33 from TMI, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply of the LDO, with an input voltage range of 2.5V to 5.5V. |
| 2 | GND | power_in | Signal ground of the LDO. |
| 3 | EN | input | Enable pin: the device is disabled when EN is at ground or below 0.4V and enabled when EN is 1.5V or above, and this pin must not be floated. |
| 4 | BP | passive | Bypass pin for the fixed-output version, which may take a 10nF ceramic capacitor to reduce output noise or be left floating. |
| 5 | VOUT | power_out | Output of the LDO, with a current limit typically 600mA and a minimum of 450mA, and a maximum output current of 300mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TMI |
| Package | SOT-23-5 |
| Category | Power Management ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage Range | VIN | 2.5 | 5.5 | V | 6 | ||
| Quiescent Current | IQ | 35 | 50 | 70 | μA | VEN=2.5V, IOUT=0mA | 6 |
| Shutdown Current | ISHDN | 0.1 | 1 | μA | VEN=0V | 6 | |
| Enable High Voltage | VENH | 0.85 | 1 | 1.15 | V | All temperature range | 6 |
| Enable Low Voltage | VENL | 0.55 | 0.75 | 0.95 | V | All temperature range | 6 |
| EN Input Current | IEN | -1 | 0.2 | 1 | μA | VIN=3.5V, VEN=3.5V or 0V | 6 |
| Output Voltage Accuracy | VOUT | -2 | 2 | % | VIN=VOUT+1V, IOUT=10mA | 6 | |
| Output Voltage Accuracy over temperature | VOUT | -3 | 3 | % | VIN=VOUT+1V, IOUT=10mA, TA=-40°C to +85°C | 6 | |
| Output Line Regulation | VLNR | 0.01 | 0.1 | %/V | VOUT+0.5V<VIN<5.5V, IOUT=10mA | 6 | |
| Dropout Voltage | VDROP | 320 | 350 | mV | IOUT=300mA | 6 | |
| Maximum Output Current | IOUTMAX | 300 | mA | 6 | |||
| Current Limit | Ilimit | 450 | 600 | mA | 6 | ||
| Output Short Current Limit | Ishort | 110 | mA | VFB or VOUT = 0V | 6 | ||
| Output Load Regulation | VLDR | 3 | mV | 1mA<IOUT<300mA, VIN=VNOM+1.0V | 6 | ||
| Power Supply Ripple Rejection | PSRR | 70 | dB | VIN=Vnom+1VP-P, f=1kHz, ILOAD=10mA, BP is floating | 6 | ||
| Start-up Time | TST | 40 | μs | VIN=3.5V, VOUT=2.5V | 6 | ||
| Resistance of Auto-Discharge | RAD | 130 | Ω | 6 | |||
| Thermal Shutdown Temperature | TSD | 160 | °C | No Load, VIN=VEN=5V | 6 | ||
| Thermal Shutdown Hysteresis | TSDHYS | 20 | °C | No Load, VIN=VEN=5V | 6 | ||
| VIN, EN Input Voltage Range | VIN, EN | -0.3 | 6 | V | 2 | ||
| All other pins Voltage Range | -0.3 | V | Maximum printed as VIN+0.3 | 2 | |||
| Junction Temperature | 160 | °C | 2 | ||||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Junction-to-ambient Thermal Resistance | 220 | °C/W | SOT23-5 package | 2 | |||
| Junction-to-case(top) Thermal Resistance | 62 | °C/W | SOT23-5 package | 2 | |||
| Power Dissipation | 0.6 | W | SOT23-5 package | 2 | |||
| Lead Temperature Soldering | 260 | °C | 10 s | 2 | |||
| ESD Human Body Model | VESD_HBM | -2000 | 2000 | V | Human Body Model for all pins, JEDEC JS-001 | 2 | |
| ESD Charged Device Model | VESD_CDM | -2000 | 2000 | V | Charged Device Model for all pins, JEDEC JS-001 | 2 | |
| Voltage Range IN | 2.5 | 5.5 | V | 2 | |||
| Operation Junction Temperature | TJ | -40 | 125 | °C | 2 | ||
| Operation Ambient Temperature | TA | -40 | 85 | °C | 2 |
CAD (KiCad official)
- Symbol:
TMI6030-33 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tmi6030-33-etched.step/tmi6030-33-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tmi6030-33.step/tmi6030-33.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TMI datasheet (14 pp, sha256
9ac63d6fe1d301c1, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).