Generated by kicad-footprint-generator · KiCad file format 20260206
TMI3411P
TMI · Battery Management ICs · SOT-23-6
TMI3411P from TMI, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable pin: drive EN above 1.5V to turn the part on and below 0.3V to turn it off, and do not leave it floating. |
| 2 | GND | power_in | Ground pin for the device. |
| 3 | LX | output | Power switch output and switch node connected to the inductor, tied to the drains of the internal P-ch and N-ch MOSFET switches. |
| 4 | VIN | power_in | Analog supply input with a recommended operating range of 2.7V to 5.5V and an absolute maximum of 7V. |
| 5 | PG | output | Power good open-drain output that goes high impedance when the output is above 91% of its regulated voltage and is pulled low when the output falls below that threshold or when EN is pulled low. |
| 6 | FB | input | Output voltage feedback pin, fed by an internal resistive divider and compared with the internal 0.6V reference voltage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TMI |
| Package | SOT-23-6 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Supply Voltage | -0.3 | 7 | V | 2 | |||
| LX Voltages | -0.3 | 7 | V | 2 | |||
| EN, FB, PG Voltage | -0.3 | 7 | V | 2 | |||
| LX Voltage (<10ns transient) | -2.5 | 7.5 | V | <10ns transient | 2 | ||
| LX Voltage (<5ns transient) | -3.5 | 8.5 | V | <5ns transient | 2 | ||
| Junction Temperature | -40 | 160 | °C | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Power Dissipation | 1000 | mW | 2 | ||||
| Lead Temperature (Soldering,10s) | 260 | °C | Soldering, 10s | 2 | |||
| Voltage Range VIN | VIN | 2.7 | 5.5 | V | 3 | ||
| TJ Operating Junction Temperature Range | TJ | -40 | 125 | °C | 3 | ||
| Input Voltage Range | 2.7 | 5.5 | V | 4 | |||
| Quiescent Current | 50 | 100 | µA | VEN=2.0V, IOUT=0, VFB=VREF x 105% | 4 | ||
| Shutdown Current | 0.1 | 1 | µA | VEN =0V | 4 | ||
| Regulated Feedback Voltage | VFB | 0.588 | 0.6 | 0.612 | V | PWM operation, TA = 25°C | 4 |
| EN Leakage Current | -1 | 0.01 | 1 | µA | 4 | ||
| LX Leakage Current | -1 | 0.01 | 1 | µA | VEN=0V, VIN=VLX=5V | 4 | |
| Junction-to-ambient thermal resistance | θJA | 112 | °C/W | 3 | |||
| Junction-to-case thermal resistance | θJC | 45 | °C/W | 3 | |||
| OVP Threshold | 6.1 | V | VIN Rising | 4 | |||
| UVLO Threshold | 2.5 | V | VIN Rising | 4 | |||
| UVLO Hysteresis | 0.5 | V | 4 | ||||
| Regulated Feedback Voltage (PFM) | VFB | 0.609 | V | PFM operation, TA = 25°C | 4 | ||
| Oscillation Frequency | 1 | MHz | VOUT=100% | 4 | |||
| Oscillation Frequency | 300 | kHz | VOUT=0V | 4 | |||
| On Resistance of PMOS | 95 | mΩ | ILX=100mA | 4 | |||
| On Resistance of NMOS | 50 | mΩ | ILX=-100mA | 4 | |||
| Peak Current Limit | 2.5 | A | VIN= 5V, VFB=90%*VREF | 4 | |||
| EN High Level Input Voltage | 1.5 | V | 4 | ||||
| EN Low Level Input Voltage | 0.5 | V | 4 | ||||
| Power Good Threshold | 91 | % | Reference to VFB voltage | 4 | |||
| Thermal Shutdown Threshold | 155 | °C | 4 | ||||
| Thermal Shutdown Hysteresis | 20 | °C | 4 |
CAD (KiCad official)
- Symbol:
TMI3411P - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.05 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tmi3411p-etched.step/tmi3411p-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tmi3411p.step/tmi3411p.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TMI datasheet (15 pp, sha256
22117bdb090f7fb9, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).