Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TMI3411P

TMI · Battery Management ICs · SOT-23-6

TMI3411P from TMI, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Enable pin: drive EN above 1.5V to turn the part on and below 0.3V to turn it off, and do not leave it floating.
2 GND power_in Ground pin for the device.
3 LX output Power switch output and switch node connected to the inductor, tied to the drains of the internal P-ch and N-ch MOSFET switches.
4 VIN power_in Analog supply input with a recommended operating range of 2.7V to 5.5V and an absolute maximum of 7V.
5 PG output Power good open-drain output that goes high impedance when the output is above 91% of its regulated voltage and is pulled low when the output falls below that threshold or when EN is pulled low.
6 FB input Output voltage feedback pin, fed by an internal resistive divider and compared with the internal 0.6V reference voltage.

Key specifications

Parameter Value
Manufacturer TMI
Package SOT-23-6
Category Power Supply Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Supply Voltage -0.3 7 V 2
LX Voltages -0.3 7 V 2
EN, FB, PG Voltage -0.3 7 V 2
LX Voltage (<10ns transient) -2.5 7.5 V <10ns transient 2
LX Voltage (<5ns transient) -3.5 8.5 V <5ns transient 2
Junction Temperature -40 160 °C 2
Storage Temperature Range -65 150 °C 2
Power Dissipation 1000 mW 2
Lead Temperature (Soldering,10s) 260 °C Soldering, 10s 2
Voltage Range VIN VIN 2.7 5.5 V 3
TJ Operating Junction Temperature Range TJ -40 125 °C 3
Input Voltage Range 2.7 5.5 V 4
Quiescent Current 50 100 µA VEN=2.0V, IOUT=0, VFB=VREF x 105% 4
Shutdown Current 0.1 1 µA VEN =0V 4
Regulated Feedback Voltage VFB 0.588 0.6 0.612 V PWM operation, TA = 25°C 4
EN Leakage Current -1 0.01 1 µA 4
LX Leakage Current -1 0.01 1 µA VEN=0V, VIN=VLX=5V 4
Junction-to-ambient thermal resistance θJA 112 °C/W 3
Junction-to-case thermal resistance θJC 45 °C/W 3
OVP Threshold 6.1 V VIN Rising 4
UVLO Threshold 2.5 V VIN Rising 4
UVLO Hysteresis 0.5 V 4
Regulated Feedback Voltage (PFM) VFB 0.609 V PFM operation, TA = 25°C 4
Oscillation Frequency 1 MHz VOUT=100% 4
Oscillation Frequency 300 kHz VOUT=0V 4
On Resistance of PMOS 95 mΩ ILX=100mA 4
On Resistance of NMOS 50 mΩ ILX=-100mA 4
Peak Current Limit 2.5 A VIN= 5V, VFB=90%*VREF 4
EN High Level Input Voltage 1.5 V 4
EN Low Level Input Voltage 0.5 V 4
Power Good Threshold 91 % Reference to VFB voltage 4
Thermal Shutdown Threshold 155 °C 4
Thermal Shutdown Hysteresis 20 °C 4

CAD (KiCad official)

  • Symbol: TMI3411P
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.05 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tmi3411p-etched.step / tmi3411p-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tmi3411p.step / tmi3411p.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TMI datasheet (15 pp, sha256 22117bdb090f7fb9, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF