TMC2262

@@ -0,0 +1,409 @@+{+  "schema_version": 1,+  "slug": "tmc2262",+  "type": "component",+  "kind": "component",+  "title": "TMC2262",+  "brief": "Analog Devices TMC2262 65 V, 4 A RMS smart stepper driver with step/dir, SPI and encoder input, 30-pin FC2QFN 6x6. KiCad, Fusion and Altium libraries, datasheet-built 3D model, every pin cited to the data sheet.",+  "version": "0.1.0",+  "because": "No TMC2262 component page exists on the wiki (adom-wiki discover search TMC2262, TMC2262ATJ on 2026-10-13); adom/tmc2240atj-t is a different part.",+  "hero": {+    "type": "billboard",+    "headline": "TMC2262",+    "subhead": "65 V, 4 A RMS smart stepper driver, step/dir and SPI, 30-pin FC2QFN 6 x 6 mm"+  },+  "component": {+    "mpn": "TMC2262AFV+",+    "manufacturer": "Analog Devices",+    "package": "30-pin FC2QFN 6 x 6 x 0.75 mm, 0.5 mm pitch (ADI package code F306A6F+1F)",+    "pin_count": 31,+    "category": "Motor driver",+    "subcategory": "Two-phase stepper motor driver with integrated MOSFETs (step/dir and SPI)",+    "body_size": {+      "x_mm": 6,+      "y_mm": 6,+      "z_mm": 0.75,+      "pitch_mm": 0.5+    },+    "parts": {+      "symbol": "tmc2262.kicad_sym",+      "footprint": "tmc2262.kicad_mod",+      "model_3d": "tmc2262-hero.glb",+      "model_3d_plain": "tmc2262-etched.glb",+      "model_3d_step": "tmc2262-etched.step",+      "model_3d_step_plain": "tmc2262.step",+      "lbr": "tmc2262.lbr",+      "datasheet": "docs/tmc2262-datasheet.pdf"+    },+    "distributor_links": {+      "mouser": {+        "part": "700-TMC2262AFV+",+        "url": "https://www.mouser.com/en/ProductDetail/Analog-Devices-Maxim-Integrated/TMC2262AFV%2b?qs=yc9RBI4tIAI0RGf8GQx95Q%3D%3D"+      },+      "digikey": {+        "part": "175-TMC2262AFV+-ND",+        "url": "https://www.digikey.com/en/products/detail/analog-devices-inc-maxim-integrated/TMC2262AFV/29705681"+      },+      "lcsc": false,+      "lcsc_note": "Not stocked by LCSC / JLCPCB: no listing found on 2026-10-13."+    },+    "wiki_url": "https://wiki.adom.inc/adom/tmc2262",+    "datasheet_url": "https://www.analog.com/media/en/technical-documentation/data-sheets/tmc2262.pdf",+    "product_url": "https://www.analog.com/en/products/tmc2262.html",+    "manufacturer_links": [+      {+        "label": "Product page (Analog Devices)",+        "url": "https://www.analog.com/en/products/tmc2262.html"+      },+      {+        "label": "Data sheet TMC2262 Rev. 0",+        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/tmc2262.pdf"+      },+      {+        "label": "Package outline 21-100708 Rev A",+        "url": "https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/fc2qfn/21-100708a.pdf"+      },+      {+        "label": "Land pattern 90-100245 Rev B",+        "url": "https://www.analog.com/media/en/package-pcb-resources/land-pattern/fc2qfn/90-100245b.pdf"+      },+      {+        "label": "TMC2262-EVKIT user guide",+        "url": "https://www.analog.com/media/en/technical-documentation/user-guides/tmc2262-evkit.pdf"+      }+    ],+    "pins": [+      {+        "number": "1",+        "name": "VS",+        "type": "power_in",+        "group": "Motor supply",+        "description": "Motor supply voltage. Provide filtering capacitance near the pin with the shortest loop to the GND plane and exposed pad.",+        "datasheet_page": 16+      },+      {+        "number": "2",+        "name": "OA2",+        "type": "output",+        "group": "Coil A",+        "description": "Motor coil A output 2.",+        "datasheet_page": 16+      },+      {+        "number": "3",+        "name": "GND",+        "type": "power_in",+        "group": "Ground",+        "description": "Ground. Connect to the ground plane.",+        "datasheet_page": 16+      },+      {+        "number": "4",+        "name": "OA1",+        "type": "output",+        "group": "Coil A",+        "description": "Motor coil A output 1.",+        "datasheet_page": 16+      },+      {+        "number": "5",+        "name": "VS",+        "type": "power_in",+        "group": "Motor supply",+        "description": "Motor supply voltage (see pin 1).",+        "datasheet_page": 16+      },+      {+        "number": "6",+        "name": "VCP",+        "type": "passive",+        "group": "Charge pump",+        "description": "Charge pump voltage. Tie to VS with a 1.0 uF, 10 V capacitor.",+        "datasheet_page": 16+      },+      {+        "number": "7",+        "name": "CPO",+        "type": "passive",+        "group": "Charge pump",+        "description": "Charge pump capacitor output.",+        "datasheet_page": 16+      },+      {+        "number": "8",+        "name": "CPI",+        "type": "passive",+        "group": "Charge pump",+        "description": "Charge pump capacitor input. Tie to CPO with a 22 nF, 100 V capacitor.",+        "datasheet_page": 16+      },+      {+        "number": "9",+        "name": "DIR",+        "type": "input",+        "group": "Step/Dir",+        "description": "Direction input.",+        "datasheet_page": 17+      },+      {+        "number": "10",+        "name": "STEP",+        "type": "input",+        "group": "Step/Dir",+        "description": "Step input.",+        "datasheet_page": 17+      },+      {+        "number": "11",+        "name": "CLK",+        "type": "input",+        "group": "Control",+        "description": "Clock input. Tie to GND with a short wire for the internal clock, or supply an external clock; an internal clock-fail-over circuit protects against loss of the external clock.",+        "datasheet_page": 16+      },+      {+        "number": "12",+        "name": "CSN",+        "type": "input",+        "group": "SPI",+        "description": "SPI chip select input, active low (internal pull-down).",+        "datasheet_page": 16+      },+      {+        "number": "13",+        "name": "SCK",+        "type": "input",+        "group": "SPI",+        "description": "SPI serial clock input (internal pull-down).",+        "datasheet_page": 16+      },+      {+        "number": "14",+        "name": "SDI",+        "type": "input",+        "group": "SPI",+        "description": "SPI data input (internal pull-down).",+        "datasheet_page": 16+      },+      {+        "number": "15",+        "name": "SDO",+        "type": "tri_state",+        "group": "SPI",+        "description": "SPI data output, tri-state (internal pull-down).",+        "datasheet_page": 16+      },+      {+        "number": "16",+        "name": "VS",+        "type": "power_in",+        "group": "Motor supply",+        "description": "Motor supply voltage (see pin 1).",+        "datasheet_page": 16+      },+      {+        "number": "17",+        "name": "OB1",+        "type": "output",+        "group": "Coil B",+        "description": "Motor coil B output 1.",+        "datasheet_page": 16+      },+      {+        "number": "18",+        "name": "GND",+        "type": "power_in",+        "group": "Ground",+        "description": "Ground. Connect to the ground plane.",+        "datasheet_page": 16+      },+      {+        "number": "19",+        "name": "OB2",+        "type": "output",+        "group": "Coil B",+        "description": "Motor coil B output 2.",+        "datasheet_page": 16+      },+      {+        "number": "20",+        "name": "VS",+        "type": "power_in",+        "group": "Motor supply",+        "description": "Motor supply voltage (see pin 1).",+        "datasheet_page": 16+      },+      {+        "number": "21",+        "name": "SLEEPN",+        "type": "input",+        "group": "Control",+        "description": "Low-active power-down and reset input. A continuous low puts the device to sleep; after sleep or reset it must be reconfigured (register contents are lost). Hold the bridges disabled with DRV_ENN while reconfiguring; do not use at high motor velocity. If unused, connect to VCC_IO. Internal pull-down.",+        "datasheet_page": 16+      },+      {+        "number": "22",+        "name": "DO0",+        "type": "output",+        "group": "Diagnostics",+        "description": "Configurable output / diagnostics output 0 to the controller; use an external pull-up in open-drain mode. Pulled low during system reset. Can also be an on-chip scope (OCSI) analog output.",+        "datasheet_page": 16+      },+      {+        "number": "23",+        "name": "ENCB",+        "type": "input",+        "group": "Encoder",+        "description": "Encoder B-channel input.",+        "datasheet_page": 16+      },+      {+        "number": "24",+        "name": "ENCA",+        "type": "input",+        "group": "Encoder",+        "description": "Encoder A-channel input.",+        "datasheet_page": 16+      },+      {+        "number": "25",+        "name": "VCC_IO",+        "type": "power_in",+        "group": "Logic supply",+        "description": "Digital I/O supply from an external source (2.3 V to 5.5 V); defines the I/O level and is required for correct output levels.",+        "datasheet_page": 17+      },+      {+        "number": "26",+        "name": "VDD",+        "type": "power_out",+        "group": "Logic supply",+        "description": "Output of the internal 1.8 V regulator. Attach 2.2 uF or more ceramic to ground (AGND) near the pin.",+        "datasheet_page": 16+      },+      {+        "number": "27",+        "name": "IREF",+        "type": "passive",+        "group": "Control",+        "description": "Analog reference current for current scaling: external resistor to GND (RREF, 12 kOhm in the electrical characteristics).",+        "datasheet_page": 16+      },+      {+        "number": "28",+        "name": "ENCN/OVN",+        "type": "bidirectional",+        "group": "Encoder",+        "description": "Encoder N-channel input, or the over-voltage output (active low).",+        "datasheet_page": 16+      },+      {+        "number": "29",+        "name": "DO1",+        "type": "output",+        "group": "Diagnostics",+        "description": "Configurable output / diagnostics output 1; external pull-up in open-drain mode. Can also be an OCSI analog output.",+        "datasheet_page": 16+      },+      {+        "number": "30",+        "name": "DRV_ENN",+        "type": "input",+        "group": "Control",+        "description": "Enable input (internal pull-up). Driven high, the power stage is switched off and all motor outputs float.",+        "datasheet_page": 16+      },+      {+        "number": "EP",+        "name": "GND",+        "type": "power_in",+        "group": "Ground",+        "description": "Exposed die pad: ground of the power stage and internal circuitry. Connect to a GND plane with as many vias as possible for heat transfer.",+        "datasheet_page": 16+      }+    ],+    "ordering_variants": [+      {+        "mpn": "TMC2262AFV+",+        "packing": "Standard packing (not tape and reel)",+        "temperature": "-40 to +125 C",+        "note": "The part this page ships as its MPN.",+        "source": "TMC2262 Rev. 0 page 187"+      },+      {+        "mpn": "TMC2262AFV+T",+        "packing": "Tape and reel",+        "temperature": "-40 to +125 C",+        "note": "Same part on tape and reel (\"T\" denotes tape-and-reel).",+        "source": "TMC2262 Rev. 0 page 187"+      }+    ],+    "models_3d": [+      {+        "file": "tmc2262-etched.step",+        "role": "library model: datasheet-built body with a virtual laser-etched part number (Adom.LaserEtch)",+        "up_axis": "Z"+      },+      {+        "file": "tmc2262.step",+        "role": "the same datasheet-built body without the mark",+        "up_axis": "Z"+      },+      {+        "file": "tmc2262-hero.glb",+        "role": "page hero only: etched chip + teal dashed pad outlines (50 %), silkscreen (30 %), pad signal labels (50 %), heatsink vias. Not for boards.",+        "up_axis": "Z"+      }+    ],+    "viewer_3d": {+      "ground": true+    },+    "provenance": {+      "datasheet": {+        "id": "TMC2262 Rev. 0",+        "rev": "Rev. 0 (02/26)",+        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/tmc2262.pdf",+        "file": "docs/tmc2262-datasheet.pdf"+      },+      "model_3d": "datasheet-built (CadQuery, tools/build_models.py); no manufacturer STEP was downloadable without a CAD-portal account",+      "footprint": "manufacturer land pattern, pad for pad (provenance/footprint-vs-datasheet.json)",+      "symbol": "adom-symbol 1.2.6, pins and groups from the datasheet pin tables"+    }+  },+  "tags": [+    "component",+    "motor driver",+    "stepper driver",+    "stepper motor",+    "trinamic",+    "analog devices",+    "tmc2262",+    "step dir",+    "spi",+    "stealthchop",+    "fc2qfn"+  ],+  "discovery_triggers": [+    "TMC2262",+    "TMC2262AFV+",+    "TMC2262AFV+T",+    "65V stepper driver",+    "4A stepper driver",+    "Trinamic stepper driver",+    "NEMA 23 stepper driver"+  ],+  "license": "CC-BY-4.0",+  "visibility": {+    "public": false+  },+  "author": {+    "name": "noah",+    "email": "[email protected]"+  },+  "sample_prompts": [],+  "discovery_pitch": null,+  "metadata": {},+  "created_at": "2026-10-13T15:15:43.618Z",+  "updated_at": "2026-10-13T15:15:43.618Z",+  "org": "adom"+}\ No newline at end of file